Instrukcja obsługi Oregon Scientific WMR 968

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Oregon Scientific WMR 968 (26 stron) w kategorii Stacja pogodowa. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 9 użytkowników na średnio 4.5 gwiazdek

EN

1

CABLE FREETM

WEATHER STATION

MODEL: WMR968

User Manual

SECTION 1 INTRODUCTION

Congratulations on purchasing the WMR968 Cable FreeTM

Weather Station. An all-purpose easy-to-use system, the

WMR968 lets you monitor the following weather elements:

-Air temperature

-Relative humidity

-Barometric pressure

-Wind speed and direction

-Rainfall

The WMR968 is also equipped with:

-Calendar clock with daily alarm

-Weather forecast within 20- to 30-mile (32 to 48 km)

radius

-Weather alarms

-Memory for maximum and minimum readings

-Simple, touch-screen operation

-RS232 PC connection jack

-™ backlight

STANDARD PACKAGE

The original WMR968 comes complete with the

following:

-Main unit (WMR968)

-Anemometer (WGR968)

-Thermo-hygrometer (THGR968)

-Rain gauge (RGR968)

-Baro-thermo-hygrometer (BTHR968)

-12V AC adapter

The thermo-hygrometer and rain gauge are powered by

solar transmitters STR928N while the anemometer is

powered by solar transmitter STR938.

The WMR968 can support up to seven different remote

instruments. You can also connect up to three optional

thermo or thermo-hygro sensors to the system.

Optional items include:

-Thermo-hygro sensor (THGR238)

-Thermo sensor (THR238)

Contact an authorized dealer for optional items.

SECTION 2 INSTALLATION

The WMR968 operates at 433MHz. No wire installation is

required among units.

The WMR968 has an effective range of 328 ft (100 m) in

an open area. Position the units within range and be sure

the transmission path is clear of interference and obstacles.

NOTE The anemometer, thermo-hygrometer and rain

gauge should be installed outdoors and in locations that

best measure the weather elements the instruments are

designed for. As for the baro-thermo-hygrometer, it must

be installed indoors. If you have any optional thermo or

thermo-hygro sensors, they can be installed outdoors or

indoors.

THE ANEMOMETER

The anemometer measures wind speed and direction.

To install it,

1.Place the wind cup over the thinnest shaft on the

anemometer’s T-bar.

2.Tighten the screw on the base of the wind cup.

Specyfikacje produktu