Instrukcja obsługi Ozito OSDK-536
Ozito
Maszyna do śrub
OSDK-536
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito OSDK-536 (6 stron) w kategorii Maszyna do śrub. Ta instrukcja była pomocna dla 17 osób i została oceniona przez 9 użytkowników na średnio 4.7 gwiazdek
Strona 1/6
HEX TORX PHILLIPS POSI
DRIVE
FLAT
PUSH 2 GO
SCREWDRIVER
KIT
3.6V LI-ION
INSTRUCTION MANUAL
SPECIFICATIONS
Voltage: 3.6V
Chuck Size: 6.35mm (¼”)
No Load Speed: 0-260/min
Speed Settings: 6
Max. Torque: 5Nm
Battery: 1.5Ah Li-Ion
Weight: 0.95kg
OSDK-536
STANDARD EQUIPMENT
3 YEAR REPLACEMENT WARRANTY*
Your product is guaranteed for a period of 36 months from the original date of purchase. If
a product is defective it will be replaced in accordance with the terms of this warranty. Warranty
excludes consumable parts, for example: valve adapters and accessories.
*This product is intended for DIY use only and replacement warranty covers domestic use.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other than that specified on the tool.
• If the tool shows signs of damage or defects caused by or resulting from abuse, accidents
or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
Ozito Industries Pty. Ltd. 25 Fox Drive, Dandenong South, Victoria, Australia 3175.
ozito.com.au
3.6V Cordless Screwdriver
32 x 25mm Driver Bits (5 x Hex, 7 x
Torx, 8 x Phillips, 7 x Posidrive & 5
x Flat Head), Bit Holder & Magnetic
Bit Holder
USB Charging Cable & Kitbox
0521
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY
YOU MUST RETURN THE PRODUCT TO YOUR NEAREST
BUNNINGS WAREHOUSE WITH YOUR BUNNINGS
REGISTER RECEIPT. PRIOR TO RETURNING YOUR
PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR
CUSTOMER SERVICE HELPLINE:
Australia: 1800 069 486
New Zealand: 0508 069 486
The benefits provided under this warranty are in addition to other rights and remedies which
are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this warranty,
however, where you have suffered any additional direct loss as a result of a defective product
you may be able to claim such expenses by contacting our customer service helpline above.
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE
THE MODEL NUMBER AND DATE OF PURCHASE
AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE
WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS
YOU MAY HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
Charging The Tool
1. Flip open the dust cover on the charging port.
2. Plug the USB C cable into
the charging port and
connect the other end to a
USB charging port/adaptor.
3. Use the LED charge indicator
lights to monitor the
charging status.
Approximate charge
percentages:
1 LED: 35%
2 LEDs: 70%
3 LEDs: 100%
Note: charging time will depend on the output of the charging
source.
WARNING! NEVER OVERCHARGE THE TOOL. NEVER
CHARGE THE SCREWDRIVER UNSUPERVISED.
4. Remove the cable and cover the charging port with the dust
cover.
1. Charging Port Dust Cover
2. Charge Indicator LEDs
3. Drive Mode Collar
4. Magnetic Chuck
5. Forward/Off/Reverse Switch
6. Speed Control Dial
3.6V LI-ION SCREWDRIVER
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
1
5
6
3
4
2
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
Attaching Driver Bits
1. Push the desired screwdriver
bit into the chuck.
2. The magnetic bit holder can be used to extend the bit in hard to
reach areas. Push the bit holder into the chuck and then attach
the desired driver bit as usual.
Adjusting The Speed
1. Rotate the speed dial to the
desired speed setting.
2. CONTROLS
OPERATION
Specyfikacje produktu
| Marka: | Ozito |
| Kategoria: | Maszyna do śrub |
| Model: | OSDK-536 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Ozito OSDK-536, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Maszyna do śrub Ozito
14 Września 2024
7 Września 2024
6 Września 2024
1 Września 2024
27 Sierpnia 2024
3 Lipca 2024
Instrukcje Maszyna do śrub
- Maszyna do śrub Netter Vibration
- Maszyna do śrub Toolcraft
- Maszyna do śrub Wiha
- Maszyna do śrub Skil
- Maszyna do śrub Truper
- Maszyna do śrub GO/ON
- Maszyna do śrub Makita
- Maszyna do śrub Power Craft
- Maszyna do śrub Fuxtec
- Maszyna do śrub Black Decker
- Maszyna do śrub Black & Decker
- Maszyna do śrub Einhell Bavaria
- Maszyna do śrub Tacklife
- Maszyna do śrub Chamberlain
- Maszyna do śrub Bruder Mannesmann
Najnowsze instrukcje dla Maszyna do śrub
13 Stycznia 2025
12 Stycznia 2025
11 Stycznia 2025
10 Stycznia 2025
4 Stycznia 2025
4 Stycznia 2025
3 Stycznia 2025
1 Stycznia 2025
1 Stycznia 2025
1 Stycznia 2025