Instrukcja obsługi Panduit PEHF3

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Panduit PEHF3 (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 15 osób i została oceniona przez 6 użytkowników na średnio 4.8 gwiazdek

For Technical Support: www.panduit.com/resources/install_maintain.asp

Page 1 of 2

INSTALLATION INSTRUCTIONS

© Panduit Corp. 2011CM508B

PatchRunnerTMEnhanced Horizontal Front-Only

Manager

Part Number(s): PEHF2, PEHF3, PEHF4

PEHF2PEHF3 PEHF4

Loosen screws

(both sides of part)

Prior to Installation

Step 1 (all configurations): Loosen mounting screws on both sides of

part. See Figure 1 for locations.

AND

Step 2 (mounting with PatchRunner

TMEnhanced Vertical Manager):

Slide both side mounting brackets as far back as possible. See Figure

2.1.

OR

Step 2 (mounting with PatchRunnerTM Vertical Manager): Align

marking on both mounting brackets with center of screws. See Figure

2.2.

OR

Step 2 (mounting with cabinet): Slide mounting brackets as far for-

ward as possible. See Fig. 2.3.

AND

Step 3 (all configurations): Tighten mounting screws on both sides of

part.

Figure 1

Figure 2.1Figure 2.2Figure 2.3

PatchRunnerTMEnhanced Horizontal Front-Only Managers include (1) Manager, (1) Door, and #12-24 Screws for Mounting to Vertical

Equipment.

Installation with PatchRunnerTM Enhanced Vertical Manager (PEV) on 2 or 4 Post Rack

Attach PatchRunnerTM Enhanced Horizontal

Front-Only Manager to desired location on Verti-

cal Equipment using #12-24 Screws.

#12-24 Screws

PEV

Vertical Rack

PatchRunnerTM Enhanced

Horizontal Front-Only

Manager

Specyfikacje produktu