Instrukcja obsługi Panduit PRV896

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Panduit PRV896 (4 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 19 osób i została oceniona przez 8 użytkowników na średnio 4.1 gwiazdek

INSTALLATION INSTRUCTIONS CM293K

© Panduit Corp. 2010

FOR TECHNICAL SUPPORT www.panduit.com/resources/install_maintain.asp

DUAL HINGEDSINGLE HINGED

Single SidedDual SidedDOORS DOORS

PRV15PRVF15 PRD15

PRV12PRVF12PRD12 PRSHD12

PRV10PRVF10 PRD10

PRV8PRVF8PRD8 PRSHD8

PRV6PRVF6PRD6 PRSHD6

All PatchRunner Managers and Dual Hinged Doors are available in 96" tall versions

6 inch and 12 inch wide PatchRunner Managers and Dual Hinged Doors are also available in

(PRV**96, PRVF**96, and PRD**96) **= 6,8,10,12,or 15 inch wide

VERTICAL CABLE MANAGEMENT

79" tall versions (PRV679, PRVF679, PRD679, PRV1279, PRVF1279, PRV1279)

Recommended bolt placement for mounting

manager to rack channel.

Middle Location

Bolt

(For Front Only Manager

& Front & Rear Manager)

Top Location

Bolt

(For Front Only & Front & Rear

Manager)

Bottom Location

Bolt and Spacer

(For Front Only Manager)

Bolt

(For Front & Rear Manager)

(1) PR ATCHUNNER Vertical Cable Manager

(6) 1/2-13 Hex Nuts

(6) 1/2-13x2.0” Bolts

(12) Washers for 1/2-13 bolts

(4) Spools

(2) .91 long 1/2-13 Bolt Spacers

* Spools sold separately for PRV6 & PRVF6

Page 1 of 4

PR ATCHUNNER Vertical Cable Manager

LOCATION GUIDE - STANDARD EIA RACK

CONTENTS

After the first rack is mounted to the floor with the

appropriate hardware, Use Three1/2-13x2.0” bolts

(supplied with the vertical cable manager panels) to

fasten the PATCHRUNNER Vertical Cable Manager

to the rack. Next, mount the second rack to the

other side of the PATCHRUNNER Vertical Cable

Manager using the remaining 1/2-13x2.0” bolts. Then

mount the second rack to the floor using the appropriate

hardware.

Center Mounting of a P RATCH UNNER on Standard EIA Rack

Spacer

Note:

Tighten bolts to 120 lbs.-in.

Signifies Bottom

6” Vertical Manager dimension shown in brackets [...]

8” Vertical Manager dimensions shown in parenthesis (...)

10” Vertical Manager dimensions shown in asterisk *...*

15 “Vertical Manager dimensions shown in brackets {...}

PART NUMBERS

Specyfikacje produktu