Instrukcja obsługi PCE Instruments PCE-IT 150
PCE Instruments
Sprzęt pomiarowy
PCE-IT 150
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla PCE Instruments PCE-IT 150 (33 stron) w kategorii Sprzęt pomiarowy. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 5.5 użytkowników na średnio 4.5 gwiazdek
Strona 1/33
High Voltage Insulation Tester
PCE-IT 150
PCE-IT 150-UK
PCE-IT 150-US
INSTRUCTION MANUAL
Index
1. Safety Precautions..................................................
2. Overview.................................................................
3. Features..................................................................
4. Specications..........................................................
5. Connections............................................................
6. Instrument layout....................................................
7. Measuring procedure..............................................
8. Charge....................................................................
9. Maintenance & repair..............................................
10. Interface connection and operation.......................
Page
1-2
2
3
4
5
6
7-15
16
17
18-29
-1-
1. Safety Precautions
Electricity can cause severe injuries even with low voltages or
currents.
Therefore it is extremely important that you read the following
information before using your high voltage insulation tester.
a. This Instrument must only be used and operated by a
competent trained person and in strict accordance with the
instructions. we will not accept liability for any damage or injury
caused by misuse or non compliance with instructions and
safety procedures.
b. This instrument must not be used on live circuits. Ensure all
circuits are de-energised before testing. see paragraph for
details of built-in warning features should your high voltage
insulation tester be connected to a live system.
c. Always inspect your high voltage insulation tester and test
leads before use for any sign of abnormality or damage. If any
abnormal conditions exist (broken test leads, cracked case,
display faulty etc...) do not attempt to take any measurement
or use the tester. Return your high voltage insulation tester to
your nearest distributor for service.
d. Your high voltage insulation tester has been designed with
your safety in mind. However, no design can completely
protect against incorrect use. Electrical circuits can be
dangerous and / or lethal when a lack of caution or poor safety
practice is used.
e. Pay attention to cautions and warnings which will inform you of
potentially dangerous procedures.
f. Your high voltage insulation tester has a live circuit warning
beeper. If it is connected to a live circuit, a rapid pulsating
bleep will be heard. DO NOT proceed to test and immediately
disconnect the instrument from the circuit. In addition your
tester will display the warning message.
Specyfikacje produktu
| Marka: | PCE Instruments |
| Kategoria: | Sprzęt pomiarowy |
| Model: | PCE-IT 150 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z PCE Instruments PCE-IT 150, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Sprzęt pomiarowy PCE Instruments
29 Marca 2025
28 Marca 2025
28 Marca 2025
28 Marca 2025
28 Marca 2025
28 Marca 2025
28 Marca 2025
28 Marca 2025
28 Marca 2025
28 Marca 2025
Instrukcje Sprzęt pomiarowy
- Monacor
- Emko
- Eltako
- Continental Edison
- Lanaform
- Greisinger
- H-Tronic
- Multimetrix
- Water-i.d.
- Omnitronic
- Fluke
- VirtuFit
- SensoProtect
- Güde
- Midland
Najnowsze instrukcje dla Sprzęt pomiarowy
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025