Instrukcja obsługi Perel SMART1230
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Perel SMART1230 (8 stron) w kategorii światło. Ta instrukcja była pomocna dla 15 osób i została oceniona przez 8 użytkowników na średnio 4.7 gwiazdek
Strona 1/8
QUICK START GUIDE
Introduction
This device should be returned to your
distributor or to a local recycling service . If
in doubt, contact your local waste
disposal authorities.
Safety Instructions
Read and understand this manual and all
safety signs before using this appliance.
For indoor use only.
Class III equipment.
• Please refer to the full-length manual on
www.velleman.eu.
• This device can be used by children aged from 8
years and above, and persons with reduced
physical, sensory or mental capabilities or lack of
experience and knowledge if they have been
given supervision or instruction concerning the
use of the device in a safe way and understand
the hazards involved. Children shall not play with
the device. Cleaning and user maintenance shall
not be made by children without supervision.
• Do not disassemble the appliance. There are no
user-serviceable parts.
• Make sure that the available voltage does not
exceed the voltage stated in the specifications of
this manual.
• Do not immerse the appliance.
• The lamps are non-directional.
General Guidelines
• Refer to the Velleman® Service and Quality
Warranty on www.velleman.eu.
• All modifications of the device are forbidden for
safety reasons. Damage caused by user
modifications to the device is not covered by the
warranty.
• Only use the device for its intended purpose.
Using the device in an unauthorised way will void
the warranty.
• Damage caused by disregard of certain guidelines
in this manual is not covered by the warranty and
the dealer will not accept responsibility for any
ensuing defects or problems.
• Nor Velleman nv nor its dealers can be held
responsible for any damage (extraordinary,
incidental or indirect) – of any nature (financial,
physical…) arising from the possession, use or
failure of this product.
• Keep this manual for future reference.
Operation
1. Download the Tuya app.
2. Connect your smart device to a 2.4 GHz WLAN
network. Launch the app and follow the first-time
setup instructions. Add the LED strip by tapping
+. Go to All Devices > Lighting and follow the on-
screen insructions.
3. Enter your WLAN password.
4. Switch on the LED strip. Wait 2 seconds, then just
switch it off and on 3 times repeatedly with a 2-
second interval. This will reset the LED strip.
5. Follow the -screen instructions to finish the on
installation.
6. Go to All Devices > Lighting and enter your wi-fi
password. The app should display the LED strip.
7. Edit the light name, e.g. Main Light and select the
room in which the LED strip is located.
8. You can now control the LED strip using the on-
board controls, the remote control and the
smartphone via the Tuya app. For full
functionality, please refer to the Me tab.
Care and Maintenance
• Wipe clean with a soft cloth dampened with a
soap and water solution. Dry carefully before
screwing back in the socket.
Technical Specifications
electrical data
LED module .......... RGB 5050 LED x white 2835 LED
total nominal power ..................................... 4 W /m
power factor ................................................. > 0.5
energy consumption ............... 2 kWh/1000 h/50 cm
dimmable ...................................... no, only via app
power supply .............. 12 VDC, 24 W (adapter incl.)
light tehcnical data
colour .......................... cold white/warm white/RGB
colour temperature ................... 2700-6500 K + RGB
beam angle .................................................... 12 0°
frequency range ............................. 2412-2472 MHz
RF power ...........................................max. 20 dBm
luminous flux
red ................................................... 21.74 lm/m
green ................................................. 37.2 lm/m
blue ................................................. 24.36 lm/m
cold white ............................................ 231 lm/m
warm white .......................................... 224 lm/m
colour rendering index .................................... > 80
starting time .............................................. < 0.5 s
warm-up time (60 %) .................................... < 1 s
lifespan
nominal lifetime ........................................ 25.000 h
number of switching cycles 10.000 ...........................
dimensions ........................................... 5 m 12 x mm
weight ............................................................. 190 g
wireless operation frequency ......................... 2.4 GHz
RC power supply ..................................... 1 x CR2025
RC power ........................................................ 3 VDC
RED Declaration of Conformity
Hereby, Velleman nv declares that the radio
equipment type SMART1230 is in compliance with
Directive 2014/53/EU.
The full text of the EU declaration of conformity is
available at the following internet address:
www.velleman.eu.
Use this device with original accessories only.
Velleman nv cannot be held responsible in the event
of damage or injury resulting from (incorrect) use of
this device. For more info on this product and the
latest version of this manual, please visit our website
www.velleman.eu. The information in this manual is
subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman
nv. All worldwide rights reserved. No part of this
manual may be copied, reproduced, translated or
reduced to any electronic medium or otherwise
without the prior written consent of the copyright
holder.
Specyfikacje produktu
| Marka: | Perel |
| Kategoria: | światło |
| Model: | SMART1230 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Perel SMART1230, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje światło Perel
27 Maja 2024
22 Maja 2024
13 Maja 2024
10 Maja 2024
6 Maja 2024
6 Maja 2024
6 Maja 2024
Instrukcje światło
- APA
- Klein Tools
- Goobay
- Amaran
- ArmyTek
- Chauvet
- Adviti
- Tesy
- Digipower
- Elation
- GVM
- Gama Sonic
- Nedis
- REVO
- Media-Tech
Najnowsze instrukcje dla światło
26 Października 2024
26 Października 2024
26 Października 2024
26 Października 2024
26 Października 2024
26 Października 2024
26 Października 2024
26 Października 2024
26 Października 2024
26 Października 2024