Instrukcja obsługi Pinnacle AudioBuddy
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pinnacle AudioBuddy (8 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 25 osób i została oceniona przez 13 użytkowników na średnio 4.5 gwiazdek
Strona 1/8
Users Manual
Dual Mic Preamp | Direct Box
Audio Buddy
Introduction
This product complies with European CE requirements.
Thank you for your purchase of the M-Audio AudioBuddy™, mic
preamp and direct box. M-Audio has designed and manufactured
several different audio mixers including MiniMixer, MicroMixer 18,
MultiMixer 6, MultiMixer 10 and miXim 10. All of these mixers have
two things in common: 1.) they are exceedingly quiet -- quieter than
99% of all mixers on the market and 2.) they are uniquely configured to
meet the specific needs of the MIDI and multimedia musician.
The Audio Buddy, once again, fits these two criteria. First, it is a very
quiet mic preamp. This is because the unit’s simple and efficient
design and ultra compact layout eliminates much of the noise. The
unit also has a higher than usual voltage “rail” across its internal op-
amps. This means that you get more “punch” and much more dynamic
audio output.
Secondly, the Audio Buddy (when coupled with its ultra quiet
performance) is the perfect audio “gateway” for recording the two
most significant, non-line level instruments in the studio: microphones
and electric guitars.
The Audio Buddy has two completely independent preamplifier
sections. Each of these sections has: 1.) a balanced XLR input on the
back of the unit, 2.) a high impedance 1/4” unbalanced input (T S) on
the front of the unit, 3.) signal (present) and clipping LEDs, 4.) a gain
control and 5.) a 1/4” dual purpose output on the back of the unit that
provides either an unbalanced out (when a mono plug is used) or a
balanced out (when a stereo plug is used).
IMPORTANT: Whenever one of the front panel high impedance
inputs is used, the associated back panel XLR is disabled.
The Audio Buddy also has built in phantom power which can be
switched on or off for both channels. When the rear panel phantom
power switch is in, phantom power to both channels is turned on and
the front Phan(tom) power LED will light.
IM PORTANT: Since the phantom power switch turns phantom
power on or off for both channels, there is no way to turn phantom
power on for one channel and off for the other channel. If you are
using the high impedance inputs the phantom power switch has no
effect.
Front and Real Panels
When reading the following description of front and rear panel harware
features, it may be helpful to refer to the adjacent diagram.
8. Main Power Indicator LE
to the Audio Buddy and wh
Specyfikacje produktu
| Marka: | Pinnacle |
| Kategoria: | odbiornik |
| Model: | AudioBuddy |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Pinnacle AudioBuddy, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje odbiornik Pinnacle
10 Września 2024
8 Września 2024
Instrukcje odbiornik
- odbiornik Denon
- odbiornik Televés
- odbiornik Peiying
- odbiornik Audioengine
- odbiornik Electro-Voice
- odbiornik Sonifex
- odbiornik Rocstor
- odbiornik Technical Pro
- odbiornik Matrox
- odbiornik Focal
- odbiornik Shinybow
- odbiornik Formuler
- odbiornik Brigmton
- odbiornik NUVO
- odbiornik Loxjie
Najnowsze instrukcje dla odbiornik
9 Kwietnia 2025
9 Kwietnia 2025
5 Kwietnia 2025
4 Kwietnia 2025
3 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
1 Kwietnia 2025
30 Marca 2025
30 Marca 2025