Instrukcja obsługi Planet POE-172
Planet
Karta sieciowa/adapter
POE-172
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Planet POE-172 (4 stron) w kategorii Karta sieciowa/adapter. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 7 użytkowników na średnio 4.8 gwiazdek
Strona 1/4
- 1 -
- 2 -
- 3 -
- 4 -
- 5 -
- 6 -
- 7 -
- 8 -
1. Package Contents
Thank you for purchasing PLANET Single-Port
10/100/1000Mbps Ultra PoE Injectors, POE-172 and
POE-173.
Model LAN Port Speed PoE Standard PoE
Budget
POE-172 10/100/1000Mbps
Ultra PoE, backward
compatible with IEEE
802.3at/af standard
60
watts
POE-173 10/100/1000Mbps Ultra PoE 60
watts
The term in the following section “Ultra PoE Injector”
of this User’s Manual means the POE-172 and POE-173.
The box of the Single-Port 10/100/1000Mbps Ultra PoE
Injector should contain the following items:
The Single-Port 10/100/1000Mbps Ultra PoE Injector
x 1
User’s Manual x 1
AC Power Cord x 1
If any of these are missing or damaged, please contact
your dealer immediately; if possible, retain the carton
including the original packing material, and use them
again to repack the product in case there is a need to
return it to us for repair.
2. Product Features
Interface
2 x RJ45 interface
1-port Data + Power output
1-port Data input
1 x AC 100-240V input power socket
Power over Ethernet
Ultra Power over Ethernet PSE
Up to 60 watts of power on 4-pair UTP cable
Backward compatible with IEEE 802.3at/af PD
device (POE-172)
Auto-detection of PoE IEEE 802.3at/af equipment
and devices to check whether there’s any damage
done via incorrect installation (POE-172)
Remote power feeding up to 100m
Hardware
All-in-one compact size design
Internal power supply
LED indicators for Power LED and Active LED (PoE
ready/in-use)
Note
PSE (Power Sourcing Equipment) is a
device (switch, or hub for instance) that
will provide power in a PoE setup. The
maximum allowed continuous output power
per such device in IEEE 802.3af is 15.4
watts, in IEEE 802.3at is 30 watts and ultra
PoE is 60 watts
Note
PD (Powered Device) such as an IP
phone, network camera or wireless access
point is a PoE-enabled terminal by PSE and
thus it consumes energy.
3. Product Specications
Product POE-172 POE-173
Hardware Specications
Interface
LAN 1 x RJ45 STP, Input Port“Data”
PoE 1 x RJ45 STP, “Data + Power”
Output Port
AC Connector 1 x AC input power socket,
IEC-320 C6
Network
Cable
Ultra PoE
(60W)
4-pair UTP Cat. 5, 5e, 6 up to
100m (328ft)
802.3af/
at PoE
(15W/30W)
2-pair UTP Cat. 3, 4, 5, up to
100m (328ft)
LED Indicator
System: Power x 1 (Green)
PoE Port: Active, PoE ready/
in Use x 1 (Green)
Data Rate 10/100/1000Mbps
Dimensions (W x D x H) 115 x 62.5 x 31 mm
Weight 235g 177g
Unit Output Voltage DC 56V, 1.08A DC 50V, 1.2A
Power Requirements 100-240V AC @50/60Hz,
1.5A max.
Power Consumption 60 watts max.
Operating Temperature 0 ~ 50 degrees C
Storage Temperature -10 ~ 70 degrees C
Operating Humidity 5 ~ 95%, relative humidity, non-
condensing
Storage Humidity 5 ~ 95%, relative humidity, non-
condensing
Power over Ethernet
PoE Standard
Ultra PoE over
4-pair UTP cable,
IEEE 802.3at
Power over
Ethernet Plus End-
span/Mid-span PSE
Ultra PoE
over 4-pair
UTP cable
PoE Power Supply Type End-span + Mid-span
Power Pin Assignment Pair 1 End-Span: 1/2 (+), 3/6 (-)
Pair 2 Mid-Span: 4/5 (+), 7/8 (-)
PoE Power Output
DC 56V/60-watt
PoE via 4-pair
DC 56V/30-watt
PoE via 2-pair
DC 50V/60-
watt PoE via
4-pair
DC 50V/30-
watt PoE via
2-pair
Standards Conformance
Standards Compliance
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast
Ethernet
IEEE 802.3ab 1000BASE-T Gigabit
Ethernet
IEEE 802.3at Power over Ethernet
Plus
IEEE 802.3af Power over Ethernet
Regulatory Compliance FCC Part 15 Class B, CE
4. Product Outlook
Figure 1: An overview of Ultra PoE Injector.
Rear Panel
Front Panel
Top Panel
Bottom
Figure 1: POE-172 & POE-173 Outlook
LED Indicators
LED Color Function
POWER Green It indicates that the Ultra PoE Injector has
power.
ACTIVE Green It indicates the port is providing 56V (POE-
172) or 50V (POE-173) DC in-line power.
5. Hardware Installation
The following section describes the hardware features of
Ultra PoE Injector. Before connecting any network device
to the Ultra PoE Injector, read this chapter carefully.
5-1 Before Installation
The POE-172 is backward compatible with IEEE 802.3af
PoE and IEEE 802.3at PoE Plus standard. It is equipped
with an AC power cord with 100-240V AC input and
injects DC 56V power into the pin of the twisted pair
cable (pair 1/2 [+], 3/6 [-] and pair 4/5 [+], 7/8 [-])
for 60-watt ultra PoE injection.
Before connecting the POE-172 to your powered device
(PD), please check to ensure that your powered device
(PD) can accept 60-watt PoE power through pin 1/2 (+)
& 3/6 (-) and pin 4/5 (+) & 7/8 (-). Otherwise, it will
damage your powered device (PD).
Note
DO NOT connect POE-173 POE port to
your non-POE network equipment Ethernet
interface. Otherwise, it will damage your
network equipment.
If there is difculty in nding a power socket for AC-DC
adapter of your non-PoE network device, the Ultra PoE
Injector and POE-171S (Ultra PoE Splitter) can provide
you with DC power for this Ethernet device conveniently
and easily.
Note
The Ultra PoE Injector and POE-171S can
be installed in pair. However, the use of the
third-party device is allowed if the device
complies with IEEE 802.3at Power over
Ethernet Plus and a maximum of 30 watts
of output capability.
Note
Since the Ultra PoE injector’s PoE port
supports 56V DC (POE-172) or 50V DC
(POE-173) PoE power output, please check
and assure the Powered Device’s (PD)
acceptable DC power range is 56V DC
or 50V DC; otherwise, it will damage the
Powered Device (PD).
5-2 Ultra PoE Injector Installation
Due to the backward capability of IEEE 802.3at/af PoE
standard, the Ultra PoE Injector can directly connect
with any IEEE 802.3at/af end-nodes such as PTZ (Pan,
Tilt & Zoom) speed dome network cameras, color touch-
screen voice over IP (VoIP) telephones, and multi-
channel wireless LAN access points. The screen in Figure
2 is shown below.
Specyfikacje produktu
| Marka: | Planet |
| Kategoria: | Karta sieciowa/adapter |
| Model: | POE-172 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Planet POE-172, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Karta sieciowa/adapter Planet
11 Września 2024
10 Września 2024
10 Września 2024
7 Września 2024
5 Września 2024
4 Września 2024
4 Września 2024
4 Września 2024
31 Sierpnia 2024
28 Sierpnia 2024
Instrukcje Karta sieciowa/adapter
- Mikrotik
- Nexxt
- Code Corporation
- Aeon Labs
- Oehlbach
- Kenwood
- SMK-Link
- Tripp Lite
- Sitecom
- Klipsch
- QNAP
- CradlePoint
- Ubiquiti Networks
- Buffalo
- ATen
Najnowsze instrukcje dla Karta sieciowa/adapter
8 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
1 Kwietnia 2025
30 Marca 2025
29 Marca 2025
14 Marca 2025
14 Marca 2025