Instrukcja obsługi PowerPlus Solar PowerBank

PowerPlus bank mocy Solar PowerBank

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla PowerPlus Solar PowerBank (2 stron) w kategorii bank mocy. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 6.5 użytkowników na średnio 4.3 gwiazdek

Pobierz PDF

Strona 1/2

BlueWalker Solar PowerBank Quick Guide

Version: 1.0

Thank you for purchasing this product. This is a portable lighting solution. It is specifically

designed to provide lighting and power solutions to remote areas where no electricity exists.

It can be easily adapted for the various environments such as garages, barns, sheds,

gazebos, green house and boat docks.

Product Overlook

1. Main power switch

2. Built-in LED (only available for SL1 model)

3. Built-in LED (only available for SL2 model)

4. Lamp connectors

5. PV input

6. USB output port

7. Control button for right lamp

8. Control button for left lamp

9. Micro USB port

10. Control button for USB output

11. Power on: green lighting

Low battery: green flashing

Fault: Red lighting

12. Battery charging: red lighting

Full battery: green lighting

1. Inspecon

The following items are inside the box:

Power pack

Lamp with holder and cable x 2pc

Solar panel with cable

Remove all items from its package and inspect it for damage that may have occurred during

shipping. If any damage is discovered, re-pack the unit and return it to the place of

purchase.

2. Charging

Before first use, please be sure to charge the battery fully. You can charge battery from

either solar panel or micro USB.

Charged by solar panel: Simply connect solar panel to “ “ marked on power pack and PV IN

place the power pack and lamps in the shaded place, where avoid exposing to sunshine

directly and away from moisture.

Charged by micro USB: Simply use a micro USB power adapter to connect Utility and the

micro USB connector marked with “5V IN”.

3. Connect to the Outputs

There are two kinds of output connectors for different devices. Please follow below

instructions to connect suitable loads to the power pack.

Two Lamps with Holders

Plug in the bundled lamp cable on the top of power pack.

Mobile Charging

There are two USB output ports for mobile device charging. Simply connect mobile devices

to USB output marked 5V OUTwith “ ”.

Inial Startup & Operaon

Product Overview

BlueWalker Solar PowerBank Quick Guide

Version: 1.0

Complete lighting system diagram

4. Operaon

Lamps/Built-in LED Operation

If pressing main power switch to turn on the unit, both connected lamps will to “l” position

be lighting. There are two control buttons on the two sides of power pack, one to control

on/off for right lamp and the other to control on/off for left lamp.

If pressing main power switch -in LED will light up at the to “ll” position, lamps and built

same time.

USB OUT Operation

No matter main power switch is on USB output port will be default off. “l” or “ll” position,

Simply press “USB On/Off” button to turn on USB output power.

Please do not expose the lighting system under the blazing sun for a long time when

the solar panel is charging it.

Before first use or after prolonged storage, please turn off the switches and fully

charge the battery.

This lighting system should be charged at least once a month and each time it should

be fully charged at least 6 hours. Be sure to put solar panel under direct sunlight.

The power pack and the lamps should always be placed in a dry and shady place.

Please keep it away from fire or any corrosives.

Please always keep the surface of solar panel clean and in good condition.

Any actions such as throw, drop, fall, knock are all prohibited.

Important Safety Warning

Specyfikacje produktu

Marka:	PowerPlus
Kategoria:	bank mocy
Model:	Solar PowerBank
Kolor produktu:	Czarny
Waga produktu:	650 g
Podręcznik użytkownika:	Tak
Szerokość opakowania:	245 mm
Wysokość opakowania:	155 mm
Głębokość opakowania:	85 mm
Źródło ładowania:	DC
Pojemność baterii:	4400 mAh
Technologia baterii:	Litowo-jonowa (Li-Ion)
Zakres temperatur (eksploatacja):	0 - 40 °C
Zakres wilgotności względnej:	0 - 90 %
Szybkie ładowanie:	Nie
Waga wraz z opakowaniem:	900 g
Diody LED:	Tak
Napięcie baterii:	3.6 V
Maksymalna liczba jednocześnie podłączonych urządzeń:	1
Kompatybilność ładowarki:	Uniwersalne
Złącze ładowania USB:	Tak
Podstawowy czas ładowania urządzenia:	4 h