Instrukcja obsługi Presto Pro SaladShooter
Presto
maszyna do cięcia
Pro SaladShooter
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Presto Pro SaladShooter (8 stron) w kategorii maszyna do cięcia. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 5 użytkowników na średnio 5.0 gwiazdek
Strona 1/8
Professional
SaladShooter
electric slicer-shredder
A great big idea for salads
and a whole lot more.
Slices and shreds right
where you want.
Interchangeable cones to
make thin slices, thick slices,
ripple cuts, and shreds. Plus,
a funnel guide.
INSTRUCTIONS
2002 by National Presto Industries, Inc.
Visit us on the web at
www.GoPresto.com
2
This is a Listed appliance. The following important safeguards are recommended by most portable ap-
pliance manufacturers.
IMPORTANT SAFEGUARDS
To reduce the risk of personal injury or property damage when using electrical appliances, basic safety precau-
tions should always be followed, including the following:
1. Read all instructions before using the slicer-shredder.
2. To protect against the risk of electrical shock, never put the motorized base, cord or plug in water or other
liquids.
3. Close supervision is necessary when any appliance is used by or near children.
4. Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
5. Do not operate any appliance with a damaged cord or plug, or in the event the appliance malfunctions,
or is dropped or damaged in any manner. Return the appliance to the Presto Factory Service Department
(see page 8) or to the nearest Presto Authorized Service Facility for examination, repair, or electrical or
mechanical adjustment.
6. The use of attachments not recommended or sold by the appliance manufacturer may cause re, electric
shock, or injury.
7. Do not use outdoors.
8. Do not let cord hang over edge of table or counter or touch hot surfaces.
9. Avoid contact with moving parts.
10. Never feed the food through the food chamber with your hands, always use the food guide.
11. Keep ngers out of the slicing-shredding chute.
12. The metal portions of the slicing and shredding cones are sharp. Handle with care.
13. Do not use the slicer-shredder for other than intended use.
SAVE THESE INSTRUCTIONS
THIS PRODUCT IS FOR HOUSEHOLD USE ONLY.
IMPORTANT SAFETY INFORMATION
Connect the power supply cord to a polarized outlet only. As a safety feature, this appliance has a polarized
plug (one blade is wider than the other). This plug will only t in a polarized outlet one way. If the plug does
not t fully in the outlet, reverse the plug. If it still does not t, contact a qualied electrician. Do not attempt
to defeat this safety feature.
Getting Acquainted
Before using your Presto Professional SaladShooter electric slicer-shredder, study the diagram below to
become familiar with the various parts of the unit and read the instructions carefully.
Before initial use, and after each subsequent use, wash all parts except the motorized base in warm, sudsy
water. Wipe the motorized base with a damp cloth to clean. Never immerse the motorized base in water or
any other liquid.
Note: For your convenience, the thin slice cone is grey to differentiate it from the thick slice cone.
Slicing-shredding chute
Food
chamber
Fingertip
power switch
Interlock
bracket
Medium shred cone Twist-lock
ring
Funnel
guide
Thick slice cone
Motorized
base
Bracket slot
Ripple
cut cone
Driving
end
Adjustable
food guide
Lock tab
Thin slice cone (grey)
Fig. A
Slicing-
shredding chute
Food
chamber
assembly
Fig. B
Food
chamber
assembly
Twist-
lock ring
Fig. C
Bracket
slot
Socket
Driving
end
Interlock
bracket
Bracket
slot
Fig. D
3
How To Use
1. Select one of the cones and insert it narrow
end rst, into the slicing-shredding chute
(Fig. A). Then attach the twist-lock ring
by turning clockwise until it locks into
place (Fig. B). The metal portions of the
slicing and shredding cones are sharp.
Handle with care.
2. Attach the food chamber assembly
to the motorized base by inserting
the portion containing the driving
end of the slicing or shredding cone
into the socket of the motorized base
(Fig. C). Then rotate the food chamber
assembly clockwise until it is upright and
it is centered with the handle. To be sure
the food chamber assembly is attached
properly, check to see that the interlock
bracket is positioned in the bracket slot
(Fig. D).
Specyfikacje produktu
| Marka: | Presto |
| Kategoria: | maszyna do cięcia |
| Model: | Pro SaladShooter |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Presto Pro SaladShooter, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje maszyna do cięcia Presto
1 Września 2024
31 Sierpnia 2024
Instrukcje maszyna do cięcia
- maszyna do cięcia Rösle
- maszyna do cięcia Borner
- maszyna do cięcia Swan
- maszyna do cięcia Mia
- maszyna do cięcia Esperanza
- maszyna do cięcia Cuisinart
- maszyna do cięcia Kalorik
- maszyna do cięcia Ufesa
- maszyna do cięcia Bosch
- maszyna do cięcia Hendi
- maszyna do cięcia Baker's Mark
- maszyna do cięcia OK
- maszyna do cięcia Cigweld
- maszyna do cięcia Unold
- maszyna do cięcia Siemens
Najnowsze instrukcje dla maszyna do cięcia
27 Marca 2025
27 Marca 2025
18 Lutego 2025
13 Lutego 2025
9 Lutego 2025
8 Lutego 2025
1 Lutego 2025
31 Stycznia 2025
11 Stycznia 2025
11 Stycznia 2025