Instrukcja obsługi Pro-Ject CD Box DS2
Pro-Ject
Odtwarzacze/nagrywarki CD
CD Box DS2
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pro-Ject CD Box DS2 (5 stron) w kategorii Odtwarzacze/nagrywarki CD. Ta instrukcja była pomocna dla 15 osób i została oceniona przez 8 użytkowników na średnio 4.5 gwiazdek
Strona 1/5
INSTRUCTIONS FOR USE
Pro-Ject CD Box DS2
© Pro-Ject Audio Systems -Ject CD Box DS2 8. . · Pro · Revision 201 12 03
2
Dear music lover,
thank you for purchasing a P -Ject Audio Systems CD player. ro
In order to achieve maximum performance and reliability you should study these instructions for use
carefully.
Warning of a hazard for the user, the unit or possible misuse.
Important notice.
This product contains a laser diode To ensure continued safety, do not remove any covers or .
attempt to gain access to the inside of the product. Refer all servicing to qualified personnel.
If a disc is cracked, chipped, warped, or otherwise damaged, don't risk to play it. You could end up
damaging the unit. This player is designed for use with fully circular, full size CDs only. Use of
shaped discs is not recommended. The manufacturer and the distributor disclaims all liability arising
in connection with the use of damaged or shaped discs.
AC outlet voltages vary from country to country. Before connecting to the mains, make sure that
the voltage in your area meets the voltage requirements printed on the power supply.
The power supply is used to disconnect the unit from the mains. Make sure that the power supply
is easily accessible at all times. Never handle the device, the power supply while your hands are
wet or damp.
Avoid letting liquids enter the device or the power supply. Never place any item containing liquid,
such as a flower vase on or near the device. Never spill any liquid on the device or the power
supply. Never place any naked flame sources, such as lighted candles on or near the device. The
product shall not be used in damp or wet locations, next to a bathtub, sink, swimming pool or any
other similar conditions.
Make all connections whilst the CD player is disconnected from the power supply.
Never use any other power supply than the one supplied with the unit.
Connect the low voltage plug from the power supply to the socket of the unit Power 9V before
connecting the power supply to the mains. The unit can be switched on and off by using 2 different
methods which are equal in priorities.
The pushbutton on the front panel of the unit alternately turns the power on or returns it to standby
mode. The blue LED on the front panel shows that the unit is powered on. If a trigger signal is present
the unit c an’t be switched off by the pushbutton.
!
!
!
© · Pro · Revision -Ject Audio Systems Pro -Ject CD Box DS2 201 128. . 03
3
The unit can be switched on via other Box Design components when a 12V trigger voltage is present at
the 2.5mm socket marked Special power- cables (polarity ) in diverse lengths Trigger Input. on
are available as accessories. The remote power-on signal can be relayed to further units via the Trigger
Output socket. When the 12V trigger signal is switched off, the unit will also switch off.
Trigger cables may only be plugged into the sockets when the unit is disconnected from the
power supply and from the mains. Failure to do so may result in damage of the unit.
Select to control the output level of the line level output using the remote control sets the level Var . Fix
to the maximum. A change is only possible when the unit is turned off – the switch has no function when
the unit is turned on.
Power turns the unit on/off
CD, Opto1 Opto2 Coax USB, , , selects the
input (alternatively left and right arrows select
inputs in turns)
Mute enable/disable mute function
EJECT ejects the disc
FILTER - selects filter - see chapter filter for
further info
Shuffle - activates random track play
Repeat - press the button repeatedly for
selecting repeat modes: repeat current track /
repeat for all tracks
Play/Pause/Stop/Next/Previous acts in the
same way as front panel buttons
If the switch on the backpanel is set to Var
then using the two blank buttons above and
below the button allows to control the “CD”
level of the line output.
Specyfikacje produktu
| Marka: | Pro-Ject |
| Kategoria: | Odtwarzacze/nagrywarki CD |
| Model: | CD Box DS2 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Pro-Ject CD Box DS2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Odtwarzacze/nagrywarki CD Pro-Ject
1 Września 2024
30 Sierpnia 2024
23 Sierpnia 2024
22 Sierpnia 2024
21 Sierpnia 2024
20 Sierpnia 2024
6 Sierpnia 2024
Instrukcje Odtwarzacze/nagrywarki CD
- Odtwarzacze/nagrywarki CD Arcam
- Odtwarzacze/nagrywarki CD Tivoli Audio
- Odtwarzacze/nagrywarki CD ECG
- Odtwarzacze/nagrywarki CD Lenco
- Odtwarzacze/nagrywarki CD Coby
- Odtwarzacze/nagrywarki CD Sherwood
- Odtwarzacze/nagrywarki CD Jensen
- Odtwarzacze/nagrywarki CD Linn
- Odtwarzacze/nagrywarki CD LG
- Odtwarzacze/nagrywarki CD TechniSat
- Odtwarzacze/nagrywarki CD Naim
- Odtwarzacze/nagrywarki CD Roadstar
- Odtwarzacze/nagrywarki CD Reloop
- Odtwarzacze/nagrywarki CD Trevi
- Odtwarzacze/nagrywarki CD Auna
Najnowsze instrukcje dla Odtwarzacze/nagrywarki CD
5 Kwietnia 2025
10 Marca 2025
5 Marca 2025
19 Lutego 2025
19 Lutego 2025
19 Lutego 2025
19 Lutego 2025
19 Lutego 2025
19 Lutego 2025
19 Lutego 2025