Instrukcja obsługi Proaim FF-FCBE-01
Proaim
Nie skategoryzowane
FF-FCBE-01
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Proaim FF-FCBE-01 (5 stron) w kategorii Nie skategoryzowane. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 5 użytkowników na średnio 4.4 gwiazdek
Strona 1/5
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Focus Bee Follow Focus (FF FCBE- -01)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo copying, recording, or otherwise, except as may be expressly permied by the applicable copyright -
statutes or in wring by the Publisher.
What s In The Box’
A s s e m b ly Ma n u a l
15mm Lightweight Core Bridge Focus Hand Wheel
Swing Arm with Drive Gear 35
Teeth knob Pouch
Drive Gear 43 Teeth
2.5mm Allen Key
2
• Loosen the knob of the Focus Hand Wheel
and aach the Core Bridge to it.
Feature: The lightweight core bridge transfers
the focus movement from the handwheel
mounted on your core bridge to the drive gear
that interfaces with your lens.
• Aer aaching the Core Bridge, properly
secure it using the knob.
• Loosen the Drive Gear and remove it.
Note: Get slip free movement with -
interchangeable drive gear, as both gears can
be conveniently mounted on either side of the
Swing Arm.
Follow Focus Setup
• Aach the Swing Arm to the Core Bridge
and secure it using the knob as shown in
the image.
Feature: The Swing Arm has a 1:1.842 gear
rao, enabling wide and smooth focus
adjustments.
Focus Hand Wheel Tension Adjustment
• Loosen the inbuilt grub screw of 15mm
Lightweight Core Bridge with the help of
Allen key and then adjust the focus hand
wheel accordingly.
• Focus hand wheel can be adjust with the
help of the grub screw provided in the core
bridge as shown in the picture.
3
Feature: 43 Teeth Drive Gear has a ner gear
rao than 35 Teeth Drive Gear, allowing the
operator to focus more precisely, especially
when working with lenses with narrow eld
depth.
• Press the locking lever aer mounng on
the rod and lock the posion.
• The movement of the Handwheel can be
adjusted by loosening the knob of the Swing
Arm.
• The movement of the Swing Arm can be
adjusted by loosening its tension adjust-
ment roller knob.
• Aer adjusng the posion of the Core
Bridge, lock the desired posion by
ghtening the knob.
Feature: The Swing Arm features a built in -
tension adjustment roller that applies slight
pressure or tension on the gear mechanism to
eliminate unwanted movement in the focus
gear.
• Mount the Follow Focus on the rod through
the Core Bridge.
Feature: 35 Teeth Drive Gear delivers a
slightly faster and less sensive focus control,
making it useful for wide angle lenses, -
especially in fast paced shoong scenarios.-
• Remove the 35 Teeth Gear and aach the
43 Teeth Gear to the Swing Arm.
Specyfikacje produktu
| Marka: | Proaim |
| Kategoria: | Nie skategoryzowane |
| Model: | FF-FCBE-01 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Proaim FF-FCBE-01, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Nie skategoryzowane Proaim
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
31 Stycznia 2025
Instrukcje Nie skategoryzowane
- Nie skategoryzowane Intel
- Nie skategoryzowane GLP
- Nie skategoryzowane Speco Technologies
- Nie skategoryzowane Clatronic
- Nie skategoryzowane AeroCool
- Nie skategoryzowane Roccat
- Nie skategoryzowane Ariete
- Nie skategoryzowane JL Audio
- Nie skategoryzowane Artrom
- Nie skategoryzowane Step2
- Nie skategoryzowane Shimano
- Nie skategoryzowane Graef
- Nie skategoryzowane ADDAC System
- Nie skategoryzowane Alpine
- Nie skategoryzowane SKB
Najnowsze instrukcje dla Nie skategoryzowane
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025