Instrukcja obsługi Profile PCF-218
Profile
przełącznik
PCF-218
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Profile PCF-218 (2 stron) w kategorii przełącznik. Ta instrukcja była pomocna dla 19 osób i została oceniona przez 10 użytkowników na średnio 4.4 gwiazdek
Strona 1/2
DIGITAL TIME SWITCH EN - 1
PCF-218
We thank you for the purchase of this Profile product.
Note: It is important that you read this manual carefully
before using the product Then keep this manual in a safe
place.
Note
Check that the voltage in-house corresponds to the
information on the type plate.
Do not expose the appliance to extremely high or low
temperatures.
Avoid contact with water.
For the activation of set programs the switch must be set
to AUTO.
Technical information
Working voltage: 230V (50Hz) – 250V
Maximum resistive capacity: 3500W/16A
Maximum inductive capacity: 2000W
Programming: periods of min. 60 seconds
Day/week program
Explanatory terms
Resistive appliances are appliances that consume the
same current quantity for the whole duration. E.g. lights.
Inductive appliances, on the other hand, consume much
more current at the start than in normal operation. This
includes coffee-makers, boilers, heating appliances, etc.
If the inductive appliance exceeds the inductive capacity
of the time switch the appliance may not be connected
to it. if it is the switching contact in the time switch will
prematurely fail. This falls outside the guarantee
conditions.
Rechargeable battery
A rechargeable battery ensures that the set time and all
other settings are saved in the case of a power failure (to a
maximum of 100 hours with a fully charged battery). If the
battery appears to be nearly empty on purchasing, plug the
time switch into the plug socket for 30 minutes before
starting programming.
12- or 24-hour display
You can select either 12-hour or 24-hour display. To switch
between the 12-hour display or 24-hour display press the
CLOCK key for at least 3 seconds.
Setting the time
Keep the key pressed in then press the CLOCK WEEK
key to set the correct day.
Keep the key pressed then press the key CLOCK HOUR
to set the correct hour.
Keep the key pressed then press the CLOCK MIN
key to set the correct minute.
NOTE: If you do not press a key for 30 seconds the
time switch automatically goes back to the normal
operating mode.
ON/OFF switching program
You can set up to 7 programs with the option of
repeating them daily or weekly.
If you press the key once PROG 1ON appears in the
left bottom of the display:
1 indicates the first program, “ON” indicates that the
appliance will switch on at the set time.
Press the key repeatedly to set the day(s) WEEK
on which the program must activate. You can also
select combinations of days along with separate
weekdays.
Press the key to set the hour at which the HOUR
program must activate.
Press the key to set the minute at which the MIN
program must activate.
Press the key again to set the time at which PROG
the program must switch off. 1OFF appears on the
display. Proceed in the same way.
Repeat the steps above to set a maximum of 7
programs.
Always make sure that the time switch is set to
AUTO if you want to activate the programs. Do this
by pressing the ON/AUTO/OFF key until the
underscore character is above AUTO on the screen.
If the underscore character is above ON the
appliance will work continuously. The switching off
times are then not active. If the underscore character
is above OFF the appliance will not work.
Insert the plug of the device to be switched in the plug
socket part of the time switch. If the connected
appliance has an “on-off” switch make sure this is “on”.
Deleting a set program
Press the key 1 to 7 times then press the PROG
RST/RCL key to delete the set time for the program
concerned.
Press the key again to restore the RST/RCL
program if you have mistakenly deleted it.
NOTE RESET: If you press the key the factory settings
are automatically reset.
Specyfikacje produktu
| Marka: | Profile |
| Kategoria: | przełącznik |
| Model: | PCF-218 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Profile PCF-218, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje przełącznik Profile
17 Sierpnia 2024
6 Lipca 2024
2 Lipca 2024
27 Czerwca 2024
27 Czerwca 2024
27 Czerwca 2024
27 Czerwca 2024
27 Czerwca 2024
27 Czerwca 2024
27 Czerwca 2024
Instrukcje przełącznik
- Noble
- Roline
- Sygonix
- Matrox
- Nous
- Steren
- Vivotek
- WHALE
- Noark
- ICasa
- Ei Electronics
- Intellinet
- APC
- Wentronic
- Rex
Najnowsze instrukcje dla przełącznik
9 Kwietnia 2025
9 Kwietnia 2025
7 Kwietnia 2025
5 Kwietnia 2025
4 Kwietnia 2025
4 Kwietnia 2025
4 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
2 Kwietnia 2025