Instrukcja obsługi Proscan PKCR2713_AMZ
Proscan
Nie skategoryzowane
PKCR2713_AMZ
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Proscan PKCR2713_AMZ (1 stron) w kategorii Nie skategoryzowane. Ta instrukcja była pomocna dla 16 osób i została oceniona przez 8.5 użytkowników na średnio 4.9 gwiazdek
Strona 1/1
MODEL NO. PKCR2713_AMZ
INSTRUCTION MANUAL
UNDERCABINET MUSIC SYSTEM
with BLUETOOTH
2
This symbol, located on back or bottom of the unit, is
intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that
may be of sufficient magnitude to constitute a risk of
electric shock to persons.
This symbol, located on back or bottom of the unit, is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
This product utilizes a Class 1 laser to read Compact
Discs. This laser Compact Disc Player is equipped with
safety switches to avoid exposure when the CD door
is open and the safety interlocks are defeated. Invisible
laser radiation is present when the CD Player’s lid
is open and the system’s interlock has failed or been
defeated. It is very important that you avoid direct
exposure to the laser beam at all times. Please do not
attempt to defeat or bypass the safety switches.
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG O WIDE SLOT, T
FULLY INSERT.
To reduce the risk of electric shock, do not remove
cover (or back). There are no user-serviceable parts
inside. Please refer any servicing to qualified service
personnel.
WARNING: Changes or modifications to this unit
not expressly approved by the party responsible for
compliance could void the user’s authority to operate
the equipment.
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc), or
rechargeable (ni-cad, ni-mh, etc) batteries.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
FCC ID: SSM393384
Warnings and Precautions
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO
RAIN OR MOISTURE.
1. - All the safety and Read Instructions
operating instruction should be read before the
product is operated.
2. - The safety and Retain Instructions
operating instruction should be retained for
future reference.
3. Heed Warnings - All warning on the product
and in the operating instructions should be
adhered to.
4. - All operating and use Follow instructions
instructions should be followed.
5. - Unplug this product from the Cleaning
wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Clean only with a
dry cloth.
6. - Do not use attachments not Attachments
recommended by the product manufacturer as
they may cause hazards.
7. Water and Moisture - Do not use this product
near water - for example, near a bath tub, wash
bowl, kitchen sink, or laundry tub; in a wet
basement, or near a swimming pool, and the
like. The apparatus shall not be exposed to
dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on
apparatus.
8. - Do not place this product on Accessories
an unstable cart, stand tripod, bracket, or
table. The product may fall, causing serious
injury to a child or adult, and serious damage
to the product. Use only with a cart, stand,
tripod, bracket, or table recommended by the
manufacturer, or sold with the product. Any
mounting of the product should follow the
manufacturer’s instructions, and should use
a mounting accessory recommended by the
manufacturer.
9. A product and cart combination should be
moved with care. Quick stops, excessive force,
and uneven surfaces may cause the appliance
and cart combination to overturn.
See figure:
10. Ventilation - Slots and openings in the cabinet
are provided for ventilation and to ensure
reliable operation of the product and to protect
it from overheating, and these openings must
not be blocked or covered. The openings
should never be blocked by placing the
product on a bed, sofa, rug, or other similar
surface. This product should not be placed in a
built-in installation such as a bookcase or rack
unless proper ventilation is provided or the
manufacturer’s instruction have been adhered
to.
11. - This product should be Power Sources
operated only from the type of power source
indicated on the marking label. If you are not
sure of the type of power supply to your home,
consult your product dealer or local power
company. For products intended to operate
from battery power, or other sources, refer to
the operating instruction.
12. - This product Grounding or Polarization
may be equipped with a polarized alternating-
current line plug (a plug having one blade
wider than the other). This plug will fit into
the power outlet only one way. This is a safety
feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If
the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do
not defeat the safety purpose of the polarizes
plug.
Alternate Warnings - This product is
equipped with a three-wire grounding-type
plug, a plug having a third (grounding) pin.
This plug will only fit into a grounding-type
power outlet. This is a safety feature. If you
are unable to insert the plug into the outlet,
contact your electrician to replace your
obsolete outlet. Do not defeat the safety
purpose of the grounding-type plug.
13. - Power supply cords Power-Cord Protection
should be routed so that they are not likely to
be walked on or pinched by items placed upon
or against them, paying particular attention to
cords at plugs, convenience receptacles, and
point where they exit from the product.
14. Protective Attachment Plug - The product
is equipped with an attachment plug having
overload protection. This is a safety feature.
See Instruction Manual for replacement or
resetting of protective device. If replacement
of the plug is required, be sure the service
technician has used a replacement plug
specified by the manufacturer that has the
same overload protection as the original plug.
15. Outdoor Antenna Grounding - If an
outside antenna is connected to the receiver,
be sure the antenna system is grounded
so as to provide some protection against
voltage surges and built-up static charges.
Article 810 of the National Electrical Code,
ANSI/NFPA 70, provides information with
regard to proper grounding of the mast and
supporting structure, grounding of the mast
and supporting structure, grounding of the
lead-in wire to an antenna-discharge unit, size
of grounding conductors, location of antenna-
discharge unit, connection to grounding
electrodes, and requirements for the grounding
electrode.
See figure:
16. - For added protection for this Lightning
product during a lightning storm, or when it
is left unattended and unused for long periods
of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This
will prevent damage to the product due to
lightning and power-line surges.
17.
Power Lines - An outside antenna system
should not be located in the vicinity of
overhead power lines or other electric light or
power circuits, or where it can fall into such
power lines or circuits. When installing an
outside antenna system, extreme care should
be taken to keep from touching such power
lines or circuits as contact with them might be
fatal.
18. - Do not overload wall outlets, Overloading
extension cords, or integral convenience
receptacles as this can result in a risk of fire or
electric shock.
19. - Never push Object and Liquid Entry
objects of any kind into this product through
openings as they may touch dangerous voltage
points or short-out parts that could result in a
fire or electric shock. Never spill liquid of any
kind on the product.
20. - Do not attempt to service this Servicing
product yourself as opening or removing
covers may expose you to dangerous voltage
or other hazards. Refer all servicing to
qualified service personnel.
21. - Unplug Damage Requiring Service
this product from the wall outlet and refer
servicing to qualified service personnel under
the following conditions:
a) When the power-supply cord or plug is
damaged,
b) If liquid has been spilled, or objects have
fallen into the product,
c) If the product has been exposed to rain or
water,
d) If the product does not operate normally
by following the operating instructions.
Adjust only those controls that are covered
by the operating instructions as an improper
adjustment of other controls may result in
damage and will often require extensive work
by a qualified technician to restore the product
to its normal operation.
e) If the product has been dropped or
damaged in any way, and
f) When the product exhibits a distinct change
in performance - this indicates a need for
service.
22. - When replacement parts Replacement Parts
are required, be sure the service technician
has used replacement parts specified by the
manufacturer or have the same characteristics
as the original part. Unauthorized substitutions
may result in fire, electric shock, or other
hazards.
23. - Upon completion of any Safety Check
service or repairs to this product, ask the
service technician to perform safety checks
to determine that the product is in proper
operating condition.
24. Wall or Ceiling Mounting - The product
should be mounted to a wall or ceiling only as
recommended by the manufacturer.
25.
Heat - The product should be situated away
from heat sources such as radiators, heat
registers, stoves, or other products (including
amplifiers) that produce heat. Battery shall not
be exposed to excessive heat such as sunshine,
fire, or the like.
26. Main plug is used as disconnect device and
it should remain readily operable during
intended use. In order to disconnect the
apparatus from the mains completely, the
mains plug should be disconnected from the
mains socket outlet completely.
27. Excessive sound pressure from earphones and
headphones can cause hearing loss.
Important Safety Instructions
3
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Mounting Peg (x4)
Random/Memory nPreset up butto
Source button
Power butto n
Timer button
Repeat/Memory Preset down button
Program/Clock set/Memory button
Display nMode butto
Display
Play/Pause n butto
11.
12.
13.
14.
15.
16.
17.
18.
19.
S p Pa oot but nto / ir Bluet h to
Sk /Tun B war b nip e ack d utto
Volum but ne – to
Open y/Close CD tra
Volum u ne + b tto
Sk /Tun ar u onip e Forw d b tt
CD tray
A Inux
DC In
LOCATION OF C TROLSON
4
18 19
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
POWER S RCEOU
A. AC Power
To power the unit, plug the built-in AC Power cord
into a standard wall outlet.
B. Battery Backup
Requires 2, AA-size, batteries (not included).
The battery backup is intended for short power
outages only. The unit’s primary functions
cannot run on the battery backup alone.
C. Remote Control
Requires one CR2025 button cell battery (included)
All of the above controls are duplicated on the unit’s
remote control.
The procedure for replacing the remote’s CR2025
battery is also detailed on the back of the remote.
5
AA
AA
LITHIUM BATTERY
CR 2025
3V
Slide
Out
Push here
LITHIUM BATTERY
CR 2025
3V
CR2025
PUSH
OPEN
Setting the Clock
1. With the power off, press and hold the button. The hour on the display will Clk set/Mem
begin flashing.
2. Press the buttons to adjust the hour.Tune +/-
3. Press the button again to adjust the minutes. The minutes on the display will begin Clk set
flashing.
4. Press the buttons to adjust the minutes.Tune +/-
5. Press the button to finish setting the time, or wait for the display to stop flashing.Clk set
Setting the Timer
1. With the power off, press the button. The display will flash.Timer
2. Press the buttons to adjust the timer in increments of 10 min.Timer
3. Press the buttons to adjust the timer in increments of 1 min.Tune +/-
4. Wait for the display to stop flashing.
5. After the set time has expired, the under cabinet music system will sound an alarm.
Disabling the Timer
To cancel the alarm after it has sounded, press the button.Power
To cancel the timer before the alarm has sounded, press the button until the display Timer
reads 000 and the timer light is no longer lit.
CL CK AND IMEO T R
Loading and Playing a CD
1. Press the button to open the door. "OP" will show in display when CD mode.OPEN/CLOSE
2. Place a CD into the tray, label side facing up.
3.
Press the button again to close the door. "CL" will show in display when CD mode.OPEN/CLOSE
4. Press the button to switch to CD mode.Source
5. Press the button to begin playing the loaded CD.Play/Pause
6. Press the buttons to cycle through tracks.Skip/Tune
Programming a CD
1. Press the button to stop the CD during play.Stop
2. Press the button.Prog
3. “PROG” will begin to blink on the display.
4. Press the buttons to select a track.Tune +/-
5. Press the button to save the selected track to the program.Program
6. Repeat steps 4 and 5 to program up to 20 tracks.
Note: This unit is not compatible with MP3 CDs.
CD
6
Radio Reception
An FM antenna is built into the unit. To improve FM radio reception, adjust the position of the
unit.
Tuning the FM Radio
1. Press the button to turn the under cabinet music system on.Power
2. Press the button to switch to FM Radio Mode.Source
3. Press the button to tune the radio manually.Tune +/-
4. Hold down the button to scan for available stations.Tune +/-
Saving and Playing a Station as a Preset
1. Tune to the desired station.
2. Press the button. Preset number will appear on the display.Clk set/Mem
3. Press the buttons to adjust to the desired preset number.M +/-
4. Press the button to save the current radio station to the selected preset.Clk set/Mem
5. Press the buttons to cycle through preset radio stations.M +/-
Pairing a Bluetooth Device for the First Time
1. Power on the unit by pressing the button.Power
2. Press the button to switch to Bluetooth mode. The Pairing Indicator will flash slowly.Source
3. Press the button. The Pairing Indicator will flash quickly. When pairing, remain within 3 Pair
feet of the unit.
4. Using the native controls on your Bluetooth device, select the
Pro PKCR2713 in your
Bluetooth settings to pair.
5. If your device requests a password, enter the default password .0 0 0 0
6. Refer to the user’s manual for your specific device for instructions on pairing and connecting
Bluetooth devices.
7. When successfully paired and connected, the Pairing Indicator will be solid.
8. After initial pairing, the unit will stay paired unless unpaired manually by the user or erased
due to a reset of the device.
9. If your device should become unpaired or you find it is unable to connect, repeat the above
steps or press the Pair button to start the pairing process pairing again.
RADIO
BLUE NETOOTH AND LI IN
7
Playing Audio through Bluetooth
1. After successfully pairing to a device, use the native controls on the connected Bluetooth
Device to select a track.
2. To play or pause the selected track, use the native controls on the connected Bluetooth
Device, or the button on the unit.Play/Pause
3. To skip forward or back on the selected track, use the native controls on the connected
Bluetooth Device, or the buttons on the unit.Skip/Tune +/-
4. Audio played through the connected Bluetooth device will now be heard through the
speakers.
Using the Audio Input
Requires a 3.5mm audio cable (not included).
1. Connect a 3.5mm audio cable to the line In Input on the side of the unit and the audio
output on an audio device.
2. Press the button to turn the unit on.Power
3. Press the button to switch to line In mode.Source
4. Use the native controls on the connected device to play your audio through the unit.
To make a warranty claim, please email support@curtiscs.com or call 1-800-968-9853.
90 day Warranty
This product is warranted to be free from defects in material and workmanship for a
period of ninety (90) days from the date of original purchase. During this period, your
exclusive remedy is repair or replacement of this product or component found to be
defective, at our option; however, you are responsible for all costs associated with
returning the product to us. If the product or component is no longer available, we will
replace with a similar one of equal or greater value. Prior to a replacement being sent, the
product must be rendered inoperable or returned to us.
This warranty does cover glass, filters, wear from normal use, use not in conformity not
with the printed directions., or damage to the product resulting from accident, alteration,
abuse, or misuse. This warranty extends only to the original consumer purchaser or gift
recipient. Keep the original sales receipt, as proof of purchase is required to make a
warranty claim. This warranty is void if the product is used for other than single-family
household use or subjected to any voltage and waveform other than as on the specified
rating on the label (e.g., 120V~60Hz).
We exclude all claims for special, incidental, and consequential damages caused by
breach of express or implied warranty. All liability is limited to the amount of the purchase
price. Every implied warranty, including any statutory warranty or condition of
merchantability or fitness for a particular purpose, is disclaimed except to the
extent prohibited by law, in which case such warranty or condition is limited to the
duration of this written warranty. This warranty gives you specific legal rights. You may
have other legal rights that vary depending on where you live. Some states or provinces
do not allow limitations on implied warranties or special, incidental, or consequential
damages, so the foregoing limitations may not apply to you.
For faster service, locate the model, type, and serial numbers on your appliance.
ATTACH YOUR PROOF OF PURCHASE HERE, PROOF OF PURCHASE IS
REQUIRED TO OBTAIN WARRANTY SERVICE.
Please have the following information available when you contact the Support Team:
• Name, address and telephone number.
• Model number and serial number.
• A clear, detailed description of the problem.
• Proof of purchase including dealer or retailer name, address and date of purchase.
PLEASE READ BEFORE OPERATING THIS EQUIPMENT
PROSCAN™ IS A REGISTERED TRADEMARK OF TECHNICOLOR USA INC.
AND USED UNDER LICENSE TO CURTIS INTERNATIONAL LTD.
Specyfikacje produktu
| Marka: | Proscan |
| Kategoria: | Nie skategoryzowane |
| Model: | PKCR2713_AMZ |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Proscan PKCR2713_AMZ, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Nie skategoryzowane Proscan
10 Marca 2025
5 Marca 2025
Instrukcje Nie skategoryzowane
- Newland
- Accsoon
- Atosa
- Everdure
- Koliber
- La Crosse Technology
- Martin Audio
- Electro Harmonix
- NightStick
- Louroe Electronics
- Geuther
- Navman
- Kodak
- Wharfedale
- Chord
Najnowsze instrukcje dla Nie skategoryzowane
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025