Instrukcja obsługi PureTools PT-TOOL-500
PureTools
Niesklasyfikowane
PT-TOOL-500
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla PureTools PT-TOOL-500 (24 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 16 osób i została oceniona przez 8.5 użytkowników na średnio 4.8 gwiazdek
Strona 1/24
User Manual
PT-TOOL-500
User Manual
HDMI 2.0 LCD Test Pattern Monitor
Model PT-TOOL-500
Designed in Germany
© 2016 PureLink GmbH All rights reserved.
User Manual
PT-TOOL-500
The PT-TOOL-500 HDMI 2.0 LCD Test Pattern Monitor has been tested for conformance to safety regulations
and requirements, and has been certied for international use. However, like all electronic equipments, the PT-
TOOL-500 should be used with care. Please read and follow the safety instructions to protect yourself from possi-
ble injury and to minimize the risk of damage to the unit.
• Follow all instructions and warnings marked on this unit.
• Do not attempt to service this unit yourself, except where explained in this manual.
• Provide proper ventilation and air circulation and do not use near water.
• Keep objects that might damage the device and assure that the placement of this unit is on a stable surface.
• Use only the power adapter and power cords and connection cables designed for this unit.
• Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
Table of Contents
1. Safety and Notice 2 ..................................................................................
2. Introduction ....................................................................................... 3
3. Features ........................................................................................... 3
4. Package Contents 3 ..................................................................................
5. Specication ....................................................................................... 4
6. Connection Diagram 5 ................................................................................
7. Panel Description 6 ..................................................................................
8. Menu Operation 7 ....................................................................................
9. Generator ......................................................................................... 8
10. Receiver ........................................................................................... 9
11. HDCP Test 10 ........................................................................................
12. EDID Analysis 11 .....................................................................................
13. LOOP Test 12 .........................................................................................
14. Ethernet Control (Tcp/Ip) 13 ..........................................................................
15. Upgrade PT-TOOL-500 17 .............................................................................
16. EYE Pattern 20 .......................................................................................
17. Warranty .........................................................................................22
2
User Manual
PT-TOOL-500
• 4K2K60 4:4:4 8bit, 4K2K60 4:2:0 16bit HDR pattern generator
• 4.3” touch panel
• Supports mouse control
• Supports user control device through Ethernet
• Firmware update through USB Flash Drive
• Supports user defined pattern up to 2GB
• Embedded LINUX KERNAL system with limitless extension
• Scrambler supported for videos over 340MHz output wise
• Loop test capability to provide statistics analysis for connection stability
• Supports HDMI loop through function
• HDCP test allow verify HDCP of HDMI source and transmit HDCP encrypted video
• Qualified physical layer performance to ensure the best compatibility
• Battery powered for portability, it can extend operation time with full load up to 4 hours
• Rechargeable battery design with short charging time about 2 hours.
3. Features
The PT-TOOL-500 HDMI 2.0 LCD Test Pattern Monitor is a versatile HDMI 2.0 toolbox with full bandwidth and HDCP
2.2 support. For ease of HDMI 2.0 installations, PT-TOOL-500 is equipped with both HDMI 2.0 pattern generator
and analyzer. With this handy and portable gadget, users will appreciate at the built-in long hour operation char-
geable battery, video patterns, touch panel control, cloud based rmware upgrade access and many other features
such as HDCP analyzer or loop test in single piece of device. In the meantime, PT-TOOL-500 can support 8 channel
LPCM audio with selectable sample rate. One more attractive feature of PT-TOOL-500 comes from bypassing HDMI
input to the connected display or built-in 4.3” touch panel to allow users to verify HDMI sources instantly.
PT-TOOL-500 is the most cost eective HDMI 2.0 tool in the market to make HDMI installation much easier than
ever.
2. Introduction
3
1. Before using the PT-TOOL-500, please plugging the power adapter to switch off the
shipping mode.
i
• 1x PT-TOOL-500
• 1x IR blaster 1x IR receiver
• 2x DC 24V
• 1x User Manual
4. Package Contents
Specyfikacje produktu
| Marka: | PureTools |
| Kategoria: | Niesklasyfikowane |
| Model: | PT-TOOL-500 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z PureTools PT-TOOL-500, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Niesklasyfikowane PureTools
25 Września 2024
Instrukcje Niesklasyfikowane
- Niesklasyfikowane Eico
- Niesklasyfikowane Campomatic
- Niesklasyfikowane Hansa
- Niesklasyfikowane PowerXL
- Niesklasyfikowane Dash
- Niesklasyfikowane Shindaiwa
- Niesklasyfikowane Honda
- Niesklasyfikowane Amplicom
- Niesklasyfikowane Miggo
- Niesklasyfikowane DVDO
- Niesklasyfikowane Sanitas
- Niesklasyfikowane Wonky Monkey
- Niesklasyfikowane Lasita Maja
- Niesklasyfikowane Infantino
- Niesklasyfikowane Foster
Najnowsze instrukcje dla Niesklasyfikowane
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025