Instrukcja obsługi Pyle PSW503ST

Pyle Wsparcie dla płaskich paneli PSW503ST

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pyle PSW503ST (8 stron) w kategorii Wsparcie dla płaskich paneli. Ta instrukcja była pomocna dla 16 osób i została oceniona przez 8.5 użytkowników na średnio 4.6 gwiazdek

Pobierz PDF
Strona 1/8
Warning: Some TV require two people to lift, as we are not responsible for any
personal injury or product damage due to mishandling.
W
W
W
Warning:
arning:
arning:
arning:
Fig 4b
Step 4: Hanging display
Firstly lift the bracket mounted display over the wall mount. And then hook the
brackets over the top of the wall mount. Rotate the display let the bottom of the
brackets hook over the bottom of wall mount, as shown in Fig.4a. Then put safe
bolts into the bottom of the brackets and lock it, as shown in Fig.4b.
Step
Step
Step
Step 4:
4:
4:
4: Hanging
Hanging
Hanging
Hanging display
display
display
display
Thank you for choosing our products
Thank
Thank
Thank
Thank you
you
you
you for
for
for
for choosing
choosing
choosing
choosing our
our
our
our products
products
products
products
-8-
Multifunctional double deck wall mount
Tilt Flat Panel TV Bracket
Easy installing: Just hang up the display
Safety: locking by spinning bolt on the bottom
Weight Capacity:10kg/22lbs~50kg/110lbs
TV size range: 26 ~42
Adjustable angle: 5 15
" "
- ～
Inside has balance adjust system
Bulit in leveler system
INSTALLATION GUIDE
IMPORTANT: If don’t understand about right install ways, please
consult to normal installing specialist.
IMPORT
IMPORT
IMPORT
IMPORTANT
ANT
ANT
ANT:
:
:
:
Item No.:PSW503ST
Item No.:PSW503ST
Item No.:PSW503ST
Item No.:PSW503ST
Item No.:PSW503ST
the facing of a quilt
Fig 4a
2,3
1
5
www pyleaudio com. .
MADE IN CHINA
Pyle Audio
1600 63rd st , Brooklyn, NY, 11204
(718)236-8000
Hardware List: Actual parts appearance and the quantity may different
with illustrated.
Hardwar
Hardwar
Hardwar
Hardware
e
e
eList:
List:
List:
List:
4
4
H
I
J
K
4
4
Square washer
Long bolt
Wall anchor
Long bolt washer
Spacer
ID Description
1
2
A
3
4
5
6
B
C
1
1
1
4
1
2
1
4
4
Wall mount
M4 mm×12 bolt
M4 mm×16 bolt
M5× mm16 bolt
M6×16mm bolt
M5×36mm bolt
M6×36mm bolt
Qty
D4
4
4
4
E
F
G
Cable Cover
Safe bolt
Box wrench
After determining the height of stand, follow the installation instructions in below
to install wall mount to different kinds of wall
Using a awl or nail to make where the nails are located, as shown as Fig.3b. Distance
between two nails for fixing wall mount must not less than 16 . Slide the plate into
position as required.(Fig.3c) Pre-drill these holes with a 5mm drill bit to at least
40mm in deep hole. Use wall mount as a template to mark the location of other three
holes and drill the same holes.
Fix the w all mount to the wall with 4 long bolts(H) and w ashers(J) .
-wooden, brick, concrete and stone.
Please make sure these holes are level and eudipleural.
by box wrench(6)
Wooden wall:
”
W
W
W
Wooden
ooden
ooden
ooden wall:
wall:
wall:
wall:
-2- -7-
A-F J
G I
HK
ID DescriptionQty
Fig 3b Fig 3c
Brick, Concrete and Stone wall:
Using a awl or nail to make where the nails are located. Distance between two nails
for fixing wall mount must not less than 16 . Slide the plate into position as required.
(Fig.3c) Pre-drill these holes with a 10mm drill bit to at least 50mm in deep hole. Use
wall mount as a template to mark the location of other three holes and drill the same
holes. Please make sure these holes are level and eudipleural. Insert wall anchors(I)
into each of these holes. Attach the wall mount to the wall using 4 long bolts(H) and
washers(J)by box wrench(6).
”
Brick,
Brick,
Brick,
Brick, Concrete
Concrete
Concrete
Concrete and
and
and
and Stone
Stone
Stone
Stone wall:
wall:
wall:
wall:
1
2
5
3
4
Plate
Fig 3d
H
J
1
Balance-adjusting Using balance-adjusting system on the plate,
make sure whether wall plate is installed
balance. If not, then slide the wall plate let
pointer level in the center position.
Left bracket
Right bracket
6
6

Specyfikacje produktu

Marka: Pyle
Kategoria: Wsparcie dla płaskich paneli
Model: PSW503ST

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Pyle PSW503ST, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Wsparcie dla płaskich paneli Pyle

Pyle

Pyle PSW503ST Instrukcja

28 Sierpnia 2024

Instrukcje Wsparcie dla płaskich paneli

Najnowsze instrukcje dla Wsparcie dla płaskich paneli

DQ

DQ 20-1070 Instrukcja

29 Stycznia 2025
Adicam

Adicam MAX+ Film Cart Instrukcja

29 Stycznia 2025
Adicam

Adicam STANDARD Film Cart Instrukcja

29 Stycznia 2025
Adicam

Adicam MINI Film Cart Instrukcja

29 Stycznia 2025
DQ

DQ LCD-CM222 Instrukcja

28 Stycznia 2025
DQ

DQ 20-1069 Instrukcja

28 Stycznia 2025
Chief

Chief PWCU Instrukcja

16 Stycznia 2025
Chief

Chief MIWRFUB Instrukcja

16 Stycznia 2025
Chief

Chief TILD1X5NE1-M Instrukcja

16 Stycznia 2025
Chief

Chief MWRIWUB Instrukcja

16 Stycznia 2025