Instrukcja obsługi Qolsys IQ4 NS

Qolsys system alarmowy IQ4 NS

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Qolsys IQ4 NS (2 stron) w kategorii system alarmowy. Ta instrukcja była pomocna dla 46 osób i została oceniona przez 23.5 użytkowników na średnio 4.2 gwiazdek

Pobierz PDF

Strona 1/2

Press

Power Button

twice within 3

seconds

UL/cUL Residential Fire and Burglary and UL/ULC Commercial Burglary Alarm Control Unit

Conforms to ANSI/UL Standards UL985, UL1023, & UL2610

Certified to ULC Sub. S545 & ULC Std. S304

Doc#: IQ4NS-QG-NA Rev Date: 2302

Qolsys, Inc. proprietary. Reproduction without written consent is not permitted.

WALL MOUNT

CREATE

ACCOUNT

Connect power supply

WARNING! Use 7vDC Power Supply

ONLY

Press and hold the power

button on the right side of

the panel for 3 seconds to

power up

TRY THE

MOBILE TECH

APP

SETUP WIZARD

intrusion-support@jci.com

CONTACT TECH SUPPORT

GOT QUESTIONS?

IQ4 NS QUICK GUIDE

1. Open the “IQ Installer Interface”, tap on the phone screen to begin. Tap Start Scan

QR Code, then position your phone and scan the QR label on the back of the panel or

the side of the box. Tap .Continue

From your smart device, download “IQ Installer” from the Apple or Google Play stores to connect to IQ4 NS

over Wi-Fi to complete local system setup. To connect, complete the following steps:

2. Press the Power Button twice within 3 seconds.

3. The will turn solid . Tap on the screen. Status LED Blue Next

4. Enter the default Installer (1111) or Dealer (2222) code to connect.

5. When prompted, change the default code to a new installer code.

6. Select , then tap Dashboard Launch Wizard.

1. With a small phillips

screwdriver, undo the

locking screw from the back

of the panel and remove the

SmartMount backplate.

1. With a small phillips

screwdriver, screw in the

locking screw from the

bottom of the panel to

secure it to the wall.

1. Mount the backplate to the

wall using flat head screws* and

appropriate wall anchors if

needed, ensuring it is level.

2. If using the model with the

legacy security radio, in the

provided hole on the right hand

side of the backplate drill a 1/4”

hole in the wall and feed the

white RF antenna into the wall.

3. A screw is required in break-

away wall tamper for UL 2610

and EN Grade 2 installations.

Connect the power supply to

the barrel jack on the back of

the panel.

1. Latch the top of the IQ4 NS

onto the SmartMount

backplate.

2. Swing the panel down

towards the backplate and

press firmly against the wall.

Specyfikacje produktu

Marka:	Qolsys
Kategoria:	system alarmowy
Model:	IQ4 NS
Kolor produktu:	Biały
Typ kontroli:	Niedostępny
Technologia łączności:	Bezprzewodowy
Bluetooth:	Tak
Wi-Fi:	Tak
Panel kontrolny alarmu:	Tak
Liczba czujników otwarcia drzwi/okien:	- szt.
Liczba czujników ruchu:	- szt.