Instrukcja obsługi QTX QT18SA
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla QTX QT18SA (3 stron) w kategorii subwoofer. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 5 użytkowników na średnio 4.7 gwiazdek
Strona 1/3
QT Active Sub Cabinets
User Manual
17 7550.751, 170.
www.qtxsound.com
Features:
High output sub driver
Dual ported enclosure
Variable X-over frequency
35mm pole-mount tting
Perforated steel grille
Introducon:
Thank you for choosing the QT series acve su cabinet Please read this manual prior to use. b .
The QT acve speaker range has been designed to serve many varied applicaons, delivering clear, powerful sound reinforcement wherever
it is needed. Please note: your QT sub cabinet may be supplied with more than 1 IEC mains lead. Be sure to use the correct lead, taking note
of the outlet voltage and rang.
Warning:
To prevent the risk of re or electric shock, do not expose this appliance to rain or moisture. To prevent electric shock do not remove the
cover. No user serviceable parts inside. Refer servicing to qualied service personnel.
Safety
Prior to connecng mains, ensure that the supply voltage is correct and the mains lead is in good condion.
Avoid ingress of water or parcles into the enclosure.
If the mains fuse blows, refer the unit to qualied service personnel
Placement
Keep the unit out of direct sunlight and away from heat sources.
Keep the unit away from moisture or dusty environments.
Cleaning
Use a so cloth with a neutral detergent to clean the cabinet, panel and controls.
To avoid damage, do not solvents to clean this equipment. use
Control Panel
Operaon
With INPUT LEVEL turned fully down and power switch o, connect the IEC to an appropriate mains outlet.
Connect output of mixer or any line level signal to the INPUT via XLR.
If the signal is to connue to further acve speakers, connect these from the THRU line level XLR.
Begin with the FREQUENCY control in the mid posion (12-o-clock posion)
Press the power switch on and gradually increase the INPUT LEVEL unl the bass signal is heard through the speaker.
Turning the FREQUENCY control up will include more mid frequencies and turning it down will eliminate all but the lowest frequencies.
Adjust the FREQUENCY control to the desired tone, nong that lower sengs need the INPUT LEVEL turning up to compensate. may
The PHASE switch can help eliminate speakers which are “out phase” from cancelling each other’s signals out.- -of
The correct seng for this switch is whichever seng gives the loudest output by a process of trial and error. –
One or other seng may also help to avoid feedback.
If there is no dierence in volume or feedback, leave the switch in the “0°” posion (out)
To avoid loud noises when powering down, turn down the OUTPUT LEVEL before switching o.
1) INPUT LEVEL Volume rotary control for input –
2) INPUT XLR line input –
3) PHASE push in to invert (reverse) signal phase –
4) THRU Balanced XLR signal out link –
5) FREQUENCY Adjust cross-over cuto frequency –
6) POWER on/off switch and indicator –
7) AC INPUT IEC mains inlet and fu –se
SPECIFICATIONS
QT15SA
QT18SA
Power supply
220-240Vac 50/60Hz (IEC)
Cuto Frequency
40 - 150Hz
Connecons
XLR line in, XLR line out
Main driver
38 15cm ( ”) Ω8
45cm (18 8 ”) Ω
Output handling (max)
6 00W
1000W
Dimensions
515 x 420 x 615mm
585 x 475 x 675mm
Weight
22kg
29kg
Troubleshooting
No output and no LEDs lit
Check POWER switch is on
Check mains lead is connected and fuse hasn’t blown
Power LED lit but no sound from external inputs
Check signal leads are OK and connected properly
Try turning up the FREQUENCY control
Ensure input signal has some bass content for the sub to produce
Check INPUT LEVEL control is not fully down
© QTX Sound 2011
Specyfikacje produktu
| Marka: | QTX |
| Kategoria: | subwoofer |
| Model: | QT18SA |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z QTX QT18SA, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje subwoofer QTX
21 Września 2024
18 Września 2024
19 Sierpnia 2024
6 Sierpnia 2024
Instrukcje subwoofer
- subwoofer Blaupunkt
- subwoofer SPL
- subwoofer Bluesound
- subwoofer Metra
- subwoofer Crestron
- subwoofer Wharfedale
- subwoofer Martin Audio
- subwoofer Peavey
- subwoofer Boss
- subwoofer Energy
- subwoofer Phoenix Gold
- subwoofer PowerBass
- subwoofer QSC
- subwoofer Cambridge
- subwoofer Musway
Najnowsze instrukcje dla subwoofer
4 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
1 Kwietnia 2025
30 Marca 2025
19 Marca 2025
19 Marca 2025
19 Marca 2025
19 Marca 2025
19 Marca 2025