Instrukcja obsługi REVO RECLP0409-1C

REVO kamera bezpieczeństwa RECLP0409-1C

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla REVO RECLP0409-1C (2 stron) w kategorii kamera bezpieczeństwa. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 5.5 użytkowników na średnio 4.0 gwiazdek

Pobierz PDF

Strona 1/2

1. Read these instructions – All these safety and

operating instructions should be read before the product is operated.

2. Keep these instructions – The safety operating and use instructions should be

retained for future reference.

3. Heed all warnings - All warnings on the product and in the operating instructions

should be adhered to.

4. Follow all instructions – All operating and use instructions should be followed.

5. Do not use this apparatus near water – For example, near a bath tub, wash bowl,

kitchen sink, laundry tub, n a web basement, near a swimming pool; etc.

6. Clean only with dry cloth – Unplug this product from the wall outlet before cleaning.

Do not use liquid cleanings.

7. Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions – Slots and openings in the cabinet are provided for ventilation, to

ensure reliable operation of the product, and to protect it from over-heating. The openings should

never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product

should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is

provided and the manufacturer’s instructions have been adhered to.

8. Do not install near any heat sources such as radiators, heat registers, stoves,

or other apparatus (Including ampliﬁers) that produce heat

9. Do not defeat the safety purpose of the polarized or grounding-type plug.

A polarized plug has two blades with one wider than the other. A grounding type plug has

two blades and a third grounding prong. The wide blade or the third prong are provided

for your safety. If the provided plug does not ﬁt into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories speciﬁed by the manufacturer

12. Use only the cart, stand tripod, bracket, or table speciﬁed by the

manufacturer, or sold with apparatus. When a cart is used, use caution

when moving the cart / apparatus combination to avoid injure from tip-over.

13. Unplug this apparatus during lightening storms or when unused for

long periods of time.

14. Refer all servicing to qualiﬁed service personnel. Servicing is required when

the apparatus has been damaged in any way, such as power supply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does not operate normally, or has been dropped.

15. CAUTION – THESE SERVICING INSTRUCTIONS ARE FOR USE BY

QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF

ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER

THAN THAT CONTAINED IN THE OPERATING INSTRUCTIONS

UNLESS YOU QRE QUALIFIED TO DO SO.

RECLP0409-1

Owner’s Manual

FEATURE

* 1/3" COLOR SONY SUPER HAD II CCD

* HIGH RESOLUTION 700TVL

* DAY & NIGHT AUTO CHANGE

* 4.0~9mm MANUAL VARIFOCAL LENS

* POWER SOURCE : DC 12V, 140mA

* MIN. ILLUMINATION : 0.005 Lux (F:1.2)

* IP66 Ingress Rating

MODEL

ELECTRICAL

Input Voltage

Power Consumption

Power Connector

VIDEO

Image Device

TOTAL Pixel 1020(H)x508(V) 1020(H)x596(V)

Eﬀective Pixels 976(H)x494(V) 976(H)x582(V)

Scanning System

Sync.System

Scanning Freq. 15.734KHz(H),59.95Hz(V) 15.625KHz(H),50Hz(V)

Horizontal Resolution

Min.illumination

S/N (Y signal)

Video Output

LENS

Focal Length

Lens Type

Mount Type

OPERATIONAL

Image Enhancement

Day & Night

White Balance

Electronic Shutter Speed

Dynamic Noise Reduction

ENVIRONMENTAL

Operating Temperature

Operating Humidity

Storage Temperature

Storage Humidity

Ingress Protection

IR LEDs

MEC HANICAL

Dimension ( WxHxD )

Weight

Approvals FCC (Class A) Listed CE(Class A) Listed

20 ~ 90% RH

IP66

26φ x 97(H) mm (without Bracket)

Approx. 180g

-10 ℃ ~ +50 ℃

20 ~ 80% RH

-20 ℃ ~ +60 ℃

ATR-Lite

Digital D&N

ATW

AUTO : ~100,000

4-9mm

Vari Focal

Board Type

2:1 INTERLACE

Internal

700TVL

0.005Lux @ F1.2 50IRE

More than 50dB

CVBS 1.0Vp-p, 75Ω

DC12V ±10%

DC12V, 140mA

DC JACK

1/3" Sony EXVIEW-HAD II 960H CCD

Please read this manual carefully before operating.

Please Keep it for future reference.

RECLP0409-1 (NTSC) RECLP0409-1 (PAL)

* You can adjust the angle of this camera to move it as follows. (3 AXIS AVAILABLE)

* Opening the front cap is not

allowed to prevent moisture

invading inside.

INSTALLATION and CONNECTION

Installing the camera

Connection

LENS FOCUS ADJUSTMENT

CAMERA IN VIDEO-OUT

DVR

MONITOR

To use lens adjustable lever, you can adjust zoom & focus as you desire.

1. Affix station Bracket on the wall or any place where you want.

2. With the supplied tapping screws, you can fix the bracket.

3. Adjust the camera lens to face the area to be monitored and fix it with the butterfly shape handle on the bracket.

Connect the RJ12 cable of the camera to the RJ12 socket on the back of the DVR.

After positioning your monitor or/and DVR, connect the monitor to the DVR through the video-out

BNC Terminial on the back panel of the DVR

If you need to extend the cable length, you can use an RJ12 extension coupler & a desired

RJ12 extension cable.

Specyfikacje produktu

Marka:	REVO
Kategoria:	kamera bezpieczeństwa
Model:	RECLP0409-1C
Kolor produktu:	Czarny
Napięcie wejściowe AC:	12 V
Wysokość produktu:	97 mm
Szerokość produktu:	26 mm
Głębokość produktu:	26 mm
Waga produktu:	180 g
Technologia łączności:	Przewodowa
Certyfikaty:	FCC, CE
Port USB:	Nie
Gniazdko wyjścia DC:	Tak
Przeznaczenie:	Wewnętrz i na wolnym powietrzu
Obsługa PoE:	Nie
Zakres temperatur (eksploatacja):	-10 - 50 °C
Zakres wilgotności względnej:	20 - 80 %
Zarządzanie przez stronę www:	Nie
Tryb nocny:	Nie
Wi-Fi:	Nie
Przewodowa sieć LAN:	Nie
Zintegrowany czytnik kart:	Nie
Zakres temperatur (przechowywanie):	-20 - 60 °C
Dopuszczalna wilgotność względna:	20 - 90 %
Model:	Kamera bezpieczeństwa CCTV
Maks. rozdzielczość:	1020 x 596 px
Stopień ochrony IP:	IP66
Typ mocowania:	Biurko
Zużycie energii:	140 mA
Stosunek sygnału do szumu:	50 dB
Długość ogniskowa:	4 - 9 mm
Typ przetwornika obrazu:	CCD
Zoom optyczny:	- x
Balans bieli:	Automatyczna
Typ migawki aparatu:	Elektroniczny
Tryb dzienny / nocny:	Tak
Min. Oświetlenie:	0.05 lx
Średnica:	26 mm
System formatu sygnału analogowego:	NTSC, PAL
Wbudowany HDD:	Nie
PTZ:	Nie
Wielkość czujnika CCD:	1/3 "
Szybkość migawki:	1/100000 s
Cechy zabiezpieczeń:	Dust resistant, Splash proof, Water resistant
Liczba linii telewizyjnych:	700
Rozdzielczości PAL:	1020 x 596 px
Rozdzielczości NTSC:	1020 x 508 px