Instrukcja obsługi Scanstrut SC-CW-06E


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Scanstrut SC-CW-06E (2 stron) w kategorii Ładowarka baterii. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 5 użytkowników na średnio 5.0 gwiazdek

Strona 1/2
1
Choose mounting location ensuring there is adequate
space behind mounting surface.
2
Cut out hole and drill pilot holes using paper template.
3
Install wireless charger SC-CW-01E using p1-x3 3mm x 10mm
pan head Philips thread forming screws provided.
Input voltage range : 10-30V DC (12/24V system)
Input current max: 1.5A
Standby current draw: < 0.03W
Certications: Qi, CE, FCC, ROHS
Waterproof rating: IPX6 front and back
Max panel thickness
16mm
(0.63")
25mm
(0.98")
157mm
(6.18")
Max phone size: 176mm (6.92”) x 92mm (3.62”)
(Including case)
4
Technical Information
READ THE IMPORTANT SAFETY INFORMATION
LEAFLET BEFORE INSTALLING
Charge/Storage pocket
Wireless charger SC-CW-01E
**Caution**
Do not over tighten.
Tools Required
Jigsaw
Philips No. 2
screwdriver
Silicone Sealant
SC-CW-01E-005
Wireless Charger
Powerdrill
Drain Pipe 8mm (5/16”)
internal diameter
(Optional, not included)
Drill bits
5mm (3/16”)
2.5mm (3/32”)
3mm (1/8”)
x1
Parts List
Pocket
x1
x4
x5
x1
Front bezel
No6 (3.5mm) x 3/4” (19mm)
self-tapping CSK
Philips screw
3 x 10mm Pan head
Philips Thread forming
screw
x1
Installation Instructions
ROKK Wireless - Nest. (SC-CW-06E)
17-09-2020 Issue 2
Optional Drain Pipe: Carefully drill drain holes using 5mm
(3/16”) drill bit. Attach drain pipe 8mm (5/16”) ID pipe, not
included.


Specyfikacje produktu

Marka: Scanstrut
Kategoria: Ładowarka baterii
Model: SC-CW-06E

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Scanstrut SC-CW-06E, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Ładowarka baterii Scanstrut

Instrukcje Ładowarka baterii

Najnowsze instrukcje dla Ładowarka baterii