Instrukcja obsługi Scosche boomBOTTLE+

Scosche podstawa/stacja dokująca boomBOTTLE+

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Scosche boomBOTTLE+ (10 stron) w kategorii podstawa/stacja dokująca. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 5 użytkowników na średnio 5.0 gwiazdek

Pobierz PDF

Strona 1/10

WATERPROOF WIRELESS SPEAKER

BTBP

www.scosche.com/register

SPECIFICATIONS

Audio Input: & 3.5mm auxiliaryBluetooth

Battery: 6000mA lithium polymer, rechargeable

Continuous use time: Up to 15 hrs.

Operating range: 33 ft. (10m)

Charging input: 5V; 2.1A

Charging output: 5V; 10W

Charge time, internal battery: 3 hrs.

Amplifier: 12W

Speaker output: 12W x 2

Frequency response: 150Hz-20kHz

Impedance: 4 ohm

Bluetooth version 4.0 Class 2; AVRCP, A2DP

Dimensions: 218mm(H) x 72mm(D)

Weight: 1.5 lbs.

Waterproof Rating: IP67 (Waterproof)

PARTS INCLUDED

BOOMBOTTLE+

Micro-USB to USB charge cable

12W USB home charger

Carabiner clip & leash

Bluetooth is a registered trademark of Bluetooth SIG, Inc.

FEATURES

• RuggedIP67dustproof/waterproofconstruction

• Dual50mmdriverandpassivesubwoofersproviderich,

clear audio in 360 degrees

• Rechargablebatteryforupto15hoursofmusicplayback

• Powerupyourportabledeviceswithbuilt-in

USB charging (10W)

• Dualpairingfortruestereosound

• Uniquebottledesignfitsintowaterbottlecages

and cup holders

• Built-inmusiccontrols

• Floatingdesignforsafe,easyretrieval

• 1/4''threadedportforendlessmountingoptions

Works with:

MostsmartphonesandtabletswithA2DPstreamingaudio.

1. SPEAKER

2. VOLUME UP (+)

3. CONNECTION STATUS LED

4. MFB (MULTIFUNCTION BUTTON)

5. VOLUME DOWN (-)

6. SPEAKER

7. LEASH

8. CARABINER

9. 1/4'' THREADED MOUNT

10. ACCESS PANEL COVER STRAP

11. ACCESS PANEL COVER

12. ACCESS PANEL

13. micro-USB CHARGING INPUT

14. CHARGING INDICATOR LED

15. 3.5mm AUDIO INPUT

16. USB CHARGING OUTPUT

17. EQ SWITCH (INDOOR/OUTDOOR)

18. SPEAKER CHANNEL SWITCH

(LEFT/STEREO/RIGHT)

19. USB HOME CHARGER

20. micro-USB to USB CHARGING CABLE

13 14 15

17 18

2019

PAIRING (Individual Speaker)

Poweron/Pairing:Pressthemultifunctionbutton(MFB)oncetoturnon

 theBOOMBOTTLE+.Atonepromptwillsound.PressandholdtheMFBfor

3 seconds, then release. The Bluetoothindicator(BlueLED)willflashblue

 redalternatelywithasoundprompt.

2. Turn on your device’s menu to search for and connect to the Bluetooth

BOOMBOTTLE+

3. Select BOOMBOTTLE+

4. Asoundpromptwillnotifyyouofasuccessfulconnection.

Note:AfterpoweringtheBOOMBOTTLE+itwillautomaticallyreconnecttothe

lastdevicepaired.Anaudiopromptwillindicateacompletedconnection.Ifno

deviceisfoundwithin10seconds,BOOMBOTTLE+willenterPairingMode

(withconstantaudioprompt),andwillbefoundonanewpairingdeviceunder

the pairing name “BOOMBOTTLE+”.

Search Mode - indicator (blue LED) flashes every (2) seconds.Bluetooth

Connection - Bluetoothindicator(blueLED)flashesslowlyafterconnection.

Pairing Mode - BluetoothindicatorflashesBlue/Redalternatelywhilein

Pairing Mode.

OPERATION

Power On: -Pressandreleasemultifunctionbutton(MFB)(withpromptsound).

Power O: PressandholdtheMFBfor10seconds(withpromptsound).

Play/Pause: Click MFB once.

Track Forward: ClickMFBtwice.

Track Back: Click MFB three times.

Volume Control: Press “+” or “-” button to increase or decrease volume.

Unitwillemitsoundpromptwhenmax.volumeisreached.

Reset: Press both “Vol +” and “Vol -” button at the same time.

Auto Shut-o: BOOMBOTTLE+willshutdownautomaticallywithnowireless

audio playback or 3.5mm AUX connection after 30 minutes.

EQ Switch:ChoosebetweenIndoorandOutdoorEQsettings.

Re-Pairing:WhentheunitispoweredonpressandholdtheMFBfor3

secondsandrelease.TheBOOMBOTTLE+willloseitsexstingconnectionand

beginpairingtoanewdevice.

DUAL PAIRING (2 speaker units)

BOOMBOTTLE+ supports true

wireless stereo function with a second unit (sold separately).BOOMBOTTLE+

1.OpenwaterproofcoverandplacetheL/S/Rswitchintothe“S”(stereo)

 positiononbothspeakers.Leavewaterproofcoveropenuntilthepairing

process is complete.

2. PowerontwoboomBOTTLE+speakerunitsatthesame

 timebypressingandreleasingeachunit'sMFB.Place

one speaker in the L (left channel) position, and place the

other speaker in the R (right channel) position. Both

 speakerswillautomaticallypairtoeachother.

3. Take the speaker that is in the L position and hold the MFB

 for3secondsandrelease.Acontinuoussoundpromptwill

indicate the unit is in pairing mode.

Select“boomBOTTLE+”fromyourmusicdevice.Thetwospeakerunitsare

 nowinStereomodeandcanbeplayedtogether.

5. Whenconnectionissuccessfulthechannel(left/stereo/right)andtheEQof

both speakers may be adjusted independently. When the speakers Note:

 areinDualPairingMode,pressingtheMFBfor3seconds(Re-Pairing)will

 onlydisconnectthespeakerfromtheBluetoothmusicdevice,butwillnot

 affecttheconnectionbetweenthetwospeakerunits.

6. To leave Dual Pairing Mode, and play just one speaker: place the speakers

in “S” (stereo) position and turn off one of the units by pressing the MFB for

 10seconds(notebothspeakerswillturnoff.Youmayalsorestartthe

speakers or press “+” and “-” buttons at the same time (Reset).

Volume up down, track forward backward/ pause/play can work from

either speaker when in Dual Pairing Mode.

Notes:

• 3.5mmAUXconnectiontothemasterspeaker(thespeakerwhichstarted

 pairingin“L”position)canalsoworkinDualPairingMode.Pluganaudio

cable (not included) to the master speaker and plug the cable into your

 audiodevice.NotethatwhileusinganaudiocabletheMFBfunctionsand

volume functions on the

BOOMBOTTLE+

willnotwork.Youmustplay

 pause,trackforward,trackbackwarddirectlyfromtheaudiodevice.

• DualPairingModeallowsthespeakerstoautopairtoeachotherandtothe

 lastphonetheywerepairedtowhentheunitshavebeenrestarted,aslong

as the speakers have not been repaired or taken out of Dual Pairing Mode.

Speaker 1

Speaker 2

(cont’d)

Specyfikacje produktu

Marka:	Scosche
Kategoria:	podstawa/stacja dokująca
Model:	boomBOTTLE+
Kolor produktu:	Black, Gold
Rodzaj zasilania:	Bateria
Wbudowany wyłącznik:	Tak
Wbudowany wyświetlacz:	Nie
Wysokość produktu:	218 mm
Głębokość produktu:	72 mm
Waga produktu:	455 g
Rekomendowane użycie:	Uniwersalne
Technologia łączności:	Bezprzewodowy
Bluetooth:	Tak
Wersja Bluetooth:	4.0
Impedancja:	4 Ω
Czas ładowania:	3 h
Ilość głośników:	1
Moc wyjściowa (RMS):	12 W
Certyfikaty:	RoHS
Port USB:	Tak
Obsługiwany typ USB:	Micro-USB
Pojemność baterii:	600 mAh
Technologia baterii:	Litowo-polimerowy (LiPo)
Przeznaczenie:	Poziomy/Pionowy
Kanały wyjścia audio:	2.0 kan.
Rodzaj baterii:	Wbudowany
Stopień ochrony IP:	IP67
Regulacja głośności:	Cyfrowy
Konstrukcja produktu:	Tubka
Wzmacniacz:	Wbudowany
Napięcie baterii:	5 V
Złącze 3,5 mm:	Tak
Czas pracy na zasilaniu akumulatorowym:	15 h
Typ głośnika:	2-drożny
Pasmo Bluetooth:	10 m
Ładowanie przez łącze USB:	Tak
Moc RMS głośników:	12 W
Średnica głośnika wysokotonowego:	50 mm
Zasilanie baterii:	2.1 A