Instrukcja obsługi SereneLife SLSFE11


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla SereneLife SLSFE11 (2 stron) w kategorii Sklepienie. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 6.5 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
SLSFE11
Portable Electronic Safe Box
INSTRUCTIONS
1. TO PROGRAM AND CHANGE
THE USER CODE
a. First, open the door of your safe,
without turning the rotary knob before
you start to program your safe.
Remove the battery compartment cover on the back of the door and
place the batteries (4x1.5 batteries type AA) into the battery holder
correctly. (Batteries included inside the safe).
b. While the door is open, press the button behind the door. The yellow
light will be on with a short beep. Please input the user code (from 3-8
digits) using any number from “0” to “9” within 30 seconds, then press “E”
to conrm it.
c. To change the user code, please use the same procedures as above.
2. TO OPEN THE SAFE
Input the user code you programmed, then press ”E”. The green light will
be on. Please turn the knob within 5 seconds and pull out to open the
safe. If a wrong digit is input, you can press C to cancel it.
Note: With each press the yellow light will ash with a short beep,
indicating that the micro processor conrmed it. If the yellow light keeps on
ashing with the beep, it means the code is wrong. Inputting the wrong
code three times will result in the micro processor refusing to accept the
input for 20 seconds. If you press the wrong code three times again, the
micro processor will refuse to accept input for 5 minutes.
3. TO CLOSE THE SAFE
Close the door and turn the knob counter-clockwise to lock the safe.
www.SereneLifeHome.com


Specyfikacje produktu

Marka: SereneLife
Kategoria: Sklepienie
Model: SLSFE11

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z SereneLife SLSFE11, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą