Instrukcja obsługi Sharp PN-L602B

Sharp monitor PN-L602B

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sharp PN-L602B (9 stron) w kategorii monitor. Ta instrukcja była pomocna dla 26 osób i została oceniona przez 13.5 użytkowników na średnio 4.7 gwiazdek

Pobierz PDF

Strona 1/9

PN-L802B

PN-L702B

PN-L602B

LCD MONITOR

TOUCH PANEL DRIVER

OPERATION MANUAL

Version 2.3

Contents

Setting up the PC .............................................................3

Installing the touch panel driver ...................................3

Touch Panel Settings .......................................................4

How to congure settings .............................................4

Calibration ....................................................................5

Properties .....................................................................6

Uninstalling the Driver Software ....................................8

Important Information

• This software has been shipped after strict quality control and product inspection. If, however, you nd any failure or

malfunction, contact your product dealer.

• Please understand that SHARP CORPORATION bears no responsibility for errors made during use by the customer or a

third party, nor for any other malfunctions or damage to this software arising during use, except where indemnity liability is

recognized under law.

• Transcribing or duplicating part or all of this manual and/or this software without permission from our company is not

permitted.

• As a part of our policy of continuous improvement, SHARP reserves the right to make design and specication changes for

product improvement without prior notice.

• The contents or details may vary depending on the screen conguration and OS version, etc.

• This manual does not contain basic operating instructions for Windows.

Trademarks

• Microsoft, Windows, and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United

States and/or other countries.

• All other brand and product names are trademarks or registered trademarks of their respective holders.

This manual explains the installation and conguration of

the touch panel driver.

Setting up the PC

To use the touch panel, the touch panel driver must be installed from the supplied CD-ROM and the touch panel must be

connected to your PC.

Installing the touch panel driver

The touch panel driver is a program that enables you to use the touch panel to operate the PC that is connected to the touch panel.

Caution

• Thiscanonlybedonebyauserwithadministratorauthority.

• Ifanolderversionofthetouchpaneldriverisinstalled,remove(uninstall)theoldversionbeforeinstallingthetouchpanel

driver.(Seepage8.)

• IfyouareusingaUSBhub,useaself-poweredhub(ahubcapableofsupplyinga500mAcurrent).Thetouchpanelwillnot

operatecorrectlyifabus-poweredUSBhubisused.

• DonottouchthetouchpanelwhenconnectingtheUSBcable.

 Ifyoutouchthetouchpanel,itwillleadtoamalfunction.Inthiscase,disconnectandthenreconnecttheUSBcable.

1. Start your PC.

2. Exit all applications that are running.

3. Connect the USB cable for the touch panel to the PC.

Afterithasbeenconnected,thetouchpanelwillbeautomaticallyrecognized.

To the USB terminal

of the PC

USB cable (Supplied) PN-L802B

USB port

4. Insert the supplied CD-ROM into the CD-ROM drive of your PC.

5. Open the CD-ROM drive in “Computer” or “My Computer”.

6. Double-click the “TouchPanel” folder, and then double-click the “Windows” folder.

7. Double-click “Setup.exe”.

 Whenthe“UserAccountControl”screenappears,click“Yes”(or“Allow”).

8. Select the language for installation, and click “Yes”.

Followtheon-screeninstructionstoinstallthedriver.

• Ifthe“WindowsSecurity”screenappears,click“Install”(or“Installthisdriversoftwareanyway”).

• Ifthe“SoftwareInstallation”screenappears,click“ContinueAnyway”.

• Ifthe“SHARPTouchPanelDriverFilesinUse”screenappears,click“Continue”.

9. Whentheinstallationnishedscreenappears,click“Close”.

. If a screen appears prompting you to restart your PC, click “Yes”.

This completes the installation of the touch panel driver.

EachtimethePCisstarted,thetouchpaneldriverwillstartautomaticallytoenablethetouchpaneltobeused.

Thersttimeyouusethetouchpanel,performcalibration(positionadjustment).(Seepage5.)

Specyfikacje produktu

Marka:	Sharp
Kategoria:	monitor
Model:	PN-L602B
Kolor produktu:	Szary
Częstotliwość wejściowa AC:	50 - 60 Hz
Napięcie wejściowe AC:	110 - 240 V
Wbudowane głośniki:	Tak
Ilość głośników:	2
Moc wyjściowa (RMS):	14 W
Długość przekątnej ekranu:	60 "
Ilość portów Ethernet LAN (RJ-45):	1
Zakres temperatur (eksploatacja):	5 - 35 °C
Zakres wilgotności względnej:	20 - 80 %
Rozdzielczość:	1920 x 1080 px
Współczynnik kontrastu (typowy):	3000:1
Ekran dotykowy:	Tak
Przewody:	AC, USB
Pobór mocy w trybie czuwania:	0.5 W
Kompatybilność 3D:	Nie
Pobór mocy:	165 W
Ilość portów DVI-D:	1
Ilość portów HDMI:	1
Port RS-232:	2
Wymiary produktu (SxGxW):	1440 x 101 x 855 mm
Kształt ekranu:	Płaski
Kąt widzenia (poziomy):	160 °
Kąt widzenia (pionowy):	160 °
Kolory wyświetlacza:	1.073 billionów kolorów
Rozmiar plamki:	0.692 x 0.692 mm
NVIDIA G-SYNC:	Nie
AMD FreeSync:	Nie
Liczba portów VGA (D-Sub):	1
HDMI:	Tak
Waga (bez podstawy):	54000 g
System operacyjny:	Windows XP, Windows Vista, Windows 7
Typ zasilacza:	Prąd przemienny
Jasność:	300 cd/m²
Długość przekątnej ekranu (cm):	152.5 cm
Wejście komponentu wideo (ypbpr/ycbcr):	1
Złożone wejście wideo:	1
Port DVI:	Tak
Podświetlenie LED:	Tak
Format obrazu:	16:9
Część widoczna ekranu:	1329.1 x 747.6 mm
Wejście S-Video:	1
Oddzielna synchronizacja H/V:	Tak
Złożona synchronizacja:	Tak
Sync-on-green (SOG):	Tak