Instrukcja obsługi SkyRC BD250
SkyRC
Ładowarka baterii
BD250
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla SkyRC BD250 (4 stron) w kategorii Ładowarka baterii. Ta instrukcja była pomocna dla 37 osób i została oceniona przez 19 użytkowników na średnio 4.4 gwiazdek
Strona 1/4
1. Connect battery to BD250
INTRODUCTION
OPERATION
-1- -2-
INSTRUCTION MANUAL
SK-600133
BATTERY DISCHARGER & ANALYZER
FEATURES
It displays real time battery voltage, discharged capacity and discharge current.
It can test battery capacity that helps select batteries with desired capacity.
It saves time when user wishes to store their large capacity batteries.
It helps activate the best performance of your batteries for competition.
Thank you for choosing the SkyRC Battery Discharger & Analyzer (BD250). The BD250 is a powerful
discharging device that allows the user to discharge a battery at up to 35 amps or 250 watts and also
measures and compares the performance of batteries. BD250 allows for the precise measurement of battery
capacity and takes the guesswork out of choosing the best battery for your application.
The BD250 is much more than a simple battery discharger or a battery load tester. It will test virtually any
type or size of battery, any chemistry or number of cells, up to 35 volts.
The BD250 is ruggedly built and uses XT60 connector for battery connection. It is small with a high performance
cooling system. Digital LED indicates battery voltage, discharged capacity and discharge current.
2. Power ON
Press the dial once to
power ON the discharger,
the LED(V/mAh) will
blink with beep sound.
3. Select cut-off voltage and discharge current
By rotating the dial to change cut-off voltage, then press dial once to confirm.
By rotating the dial to change discharge current.
V / mAh V / mAh
A A
4. Start discharging process.
Press and hold dial for 2 seconds, the discharger will start with
beep sound.
During the discharging process, the digital LED(V/mAh) will
alternate the display of battery voltage and discharging capacity.
V / mAh V / mAh
6. Process finished.
When the discharging process has finished, the discharger will beep 5 times, and the LED(V/mAh)
will show battery voltage and discharge capacity respectively.
Digital LED(V/mAh)
Battery Voltage
/ Capacity Display
Digital LED(A)
Current Display
Rotary Dial
for Setting Cutoff Voltage
Discharging Current
Start Stop Button/
Temperature Controlled
Cooling Fan
XT60 Battery
Port
Data Link
Heat Sink
The LED(V/mAh) shows the current battery voltage.
Current Display Accuracy:
Voltage Display Accuracy:
Dimension:
Weight:
0.01-10.00A ±60mA
10.00-35.00A ±3%
5.4-10V ±80mV
10-20V ±120mV
20-35V ±160mV
136.6x104.8x107mm
879g
SPECIFICATION
Accepted Voltage Range: 5.40-35.00V
Low Voltage Alert: <5.2V
High Voltage Alert: >35V
Max. Discharge Power: 250W
Discharge Current Range: 0.01A-35.00A
Current Consumption in Sleep Mode: <100uA
Capacity Display Accuracy: 3%±
5. Stop discharging process.
A
During the discharging process, Press the dial once to stop the
discharging process, the digital LED(A) shows “Stop”.
NOTE:
After the discharge process completes, rotate the button to view the real-time battery voltage every
30 seconds for the first six minutes.
At certain intervals, the slower the voltage reduces during discharge, the better the battery
performances.
This feature can help to select good-performance battery for your race or flight.
Specyfikacje produktu
| Marka: | SkyRC |
| Kategoria: | Ładowarka baterii |
| Model: | BD250 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z SkyRC BD250, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Ładowarka baterii SkyRC
17 Września 2024
17 Września 2024
16 Września 2024
15 Września 2024
13 Września 2024
13 Września 2024
13 Września 2024
13 Września 2024
13 Września 2024
12 Września 2024
Instrukcje Ładowarka baterii
- IOttie
- Outspot
- Sven
- Beltrona
- Einhell
- Dometic
- Aim TTi
- CRUX
- Jump-N-Carry
- Emtop
- Envertec
- Urban Revolt
- GForce
- HiKOKI
- Flex
Najnowsze instrukcje dla Ładowarka baterii
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
28 Stycznia 2025
28 Stycznia 2025
28 Stycznia 2025
28 Stycznia 2025
28 Stycznia 2025
17 Stycznia 2025
13 Stycznia 2025