Instrukcja obsługi SkyRC D200
SkyRC
Ładowarka baterii
D200
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla SkyRC D200 (32 stron) w kategorii Ładowarka baterii. Ta instrukcja była pomocna dla 15 osób i została oceniona przez 8 użytkowników na średnio 4.5 gwiazdek
Strona 1/32

SkyRC Technology Co., Ltd. 2015 Version 1.0
Soldering Station
AC/DC Dual Balance Charger

TABLE OF CONTENTS
INTRODUCTION
SPECIAL FEATURES
WARNING AND SAFETY NOTES
PROGRAM FLOW CHART
OPERATION
OPERATING PROGRAM
CHARGING PROGRAM
BATTERY MEMORY SET AND CALL OUT
SYSTEM SETTING
BATTERY METER
BATTERY RESISTANCE METER
SOLDERING IRON
WARNING AND ERROR MESSAGE
USING THE CHARGE CONTROL SOFTWARE “CHARGE MASTER”
SPECIFICATION
CONFORMITY DECLARATION
COMMONLY USED TERMS
WARRANTY AND SERVICE
01
03
06
09
10
11
15
16
18
20
21
22
24
25
26
27
28
29

Congratulations on your choice of SKYRC D200 AC/DC Dual Balance
Charger/Discharger. This unit is simple to use, but the operation of a
sophisticated automatic charger such as SKYRC D200 does require some
knowledge on the part of the user. These operating instructions are designed to
ensure that you quickly become familiar with its functions. It is therefore
important that you read right through the Operating Instructions, Warning and
Safety Notes before you attempt to use your new charger for the first time. We
hope you have many years of pleasure and success with your new battery
charger.
SKYRC D200 is a twin-channel charger with two independent circuits which
can charge two different kinds of batteries simultaneously. It also supports
power distribution in AC mode to make full use of the power when charging a
small battery in one channel and allocate all remaining power to charge another
big battery pack. What’s more, users could set the terminal voltage by
themselves and connect it to PC for PC control and firmware upgrade. Besides
that, users could also use it as Lithium Battery Meter and Battery Internal
Resistance Meter. There are Automatic Charging Current Limit, Capacity Limit,
Temperature Threshold and Processing Time Limit which makes the charger
safe to use.
SKYRC D200 is a high-performance, micro processor control charge/discharge
station with battery management suitable for use with all current battery types,
with integral equalizer for six-cell Lithium-Polymer (LiPo), Lithium iron
phosphate(LiFe) and Lithium-Ion (LiIon) batteries; maximum 20A charge
current and maximum 200W charge power. The additional LiHV mode is able to
charge the new generation of LiPo batteries with an end of charge voltage
4.35V.
Additionally, it has a built in soldering iron that can heat up to 450 . With heavy ℃
duty 60W, the temperature is adjustable from 200-450 .℃
Please BE SURE to read these INSTRUCTIONS, WARNING and SAFETY
NOTES before you use the charger for the first time.
It can be dangerous to mis-handle batteries and battery chargers, as there is
always a risk of batteries catching fire and exploding.
INTRODUCTION
01 ·D200
Specyfikacje produktu
Marka: | SkyRC |
Kategoria: | Ładowarka baterii |
Model: | D200 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z SkyRC D200, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Ładowarka baterii SkyRC
17 Września 2024
17 Września 2024
16 Września 2024
15 Września 2024
13 Września 2024
13 Września 2024
13 Września 2024
13 Września 2024
13 Września 2024
12 Września 2024
Instrukcje Ładowarka baterii
- Ładowarka baterii Targus
- Ładowarka baterii Alogic
- Ładowarka baterii Milwaukee
- Ładowarka baterii Traxxas
- Ładowarka baterii Interphone-Cellularline
- Ładowarka baterii 4Load
- Ładowarka baterii Victron
- Ładowarka baterii MSW
- Ładowarka baterii Envertech
- Ładowarka baterii Bosch
- Ładowarka baterii Growatt
- Ładowarka baterii Fronius
- Ładowarka baterii Bang Olufsen
- Ładowarka baterii EcoFlow
- Ładowarka baterii Festool
Najnowsze instrukcje dla Ładowarka baterii
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
28 Stycznia 2025
28 Stycznia 2025
28 Stycznia 2025
28 Stycznia 2025
28 Stycznia 2025
17 Stycznia 2025
13 Stycznia 2025