Instrukcja obsługi SMART Technologies FS-SBID-200
SMART Technologies
Tablica
FS-SBID-200
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla SMART Technologies FS-SBID-200 (15 stron) w kategorii Tablica. Ta instrukcja była pomocna dla 38 osób i została oceniona przez 19.5 użytkowników na średnio 4.7 gwiazdek
Strona 1/15

smarttech.com/kb/171822 2
Learn more
This guide and other resources for FS-SBID-200 are available in the Support
section of the SMARTwebsite (smarttech.com/support). Scan this QRcode to view
these resources on your mobile device.
Trademark notice
SMARTBoard, smarttech, the SMART logo and all SMART taglines are trademarks or registered trademarks of SMARTTechnologiesULC in the U.S. and/or other countries. All
third-party product and company names may be trademarks of their respective owners.
Copyright notice
© 2022SMARTTechnologiesULC. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into
any language in any form by any means without the prior written consent of SMARTTechnologiesULC. Information in this manual is subject to change without notice and does
not represent a commitment on the part of SMART.
This product and/or use thereof is covered by one or more of the following U.S. patents:
www.smarttech.com/patents
May 2, 2022
Address
3636 Research Road NW
Calgary, Alberta, Canada
T2L 1Y1

SMART Heavy Duty MobileStand
smarttech.com/kb/171822 3
Important information
Note
Refer to the illustrated installation instructions for important information about installing and setting up
the stand.
Warning
l
Read the following warnings carefully. Failure to read the warnings below or to follow the
installation instructions included with your SMART product could result in personal injury or
product damage, and may result in a voiding of warranties for this product and/or product
subsequently mounted on it.
l
The assembly and installation of this product is intended for a trained professional.
l
The installer must follow the instructions in the installation guide. Not doing so can result in injury
or damage to equipment.
l
Use only SMART-supplied mounting hardware or hardware that is designed to properly support
the weight of your product.
l
CAUTION – Use the FS-SBID-200 stand only with displays with diagonal measurements that
range from 55" (140 cm) to 86" (218 cm) and that weigh between 92.4 lb. (42 kg) and 265 lb. (120
kg). Using the stand with other displays might be unstable and could result in injury.
l
The maximum allowed weight of accessories that can be placed on the accessory tray is 11 lb. (5
kg).
l
The maximum allowed weight of accessories that can be placed on the base is 22 lb. (10 kg).
l
Do not use the handles to lift the stand.
l
Do not operate the SMARTproduct if it is damaged.
l
Do not allow children to operate or play with the SMART product.
l
WARNING – Death or serious injury may occur when children climb on audio and/or video
equipment furniture. A remote control or toys placed on the furnishing may encourage a child to
climb on the furnishing and as a result the furnishing may tip over on to the child.
l
Do not stand (or allow children to stand) on a chair to touch the surface of your SMART product.
Rather, mount the product at the appropriate height.
Specyfikacje produktu
Marka: | SMART Technologies |
Kategoria: | Tablica |
Model: | FS-SBID-200 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z SMART Technologies FS-SBID-200, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Tablica SMART Technologies
3 Października 2024
Instrukcje Tablica
- Da-Lite
- Smart
- Cisco
- Sharp
- EInstruction
- Promethean
- Iiyama
- Elo
- MooreCo
- Conen Mounts
- InFocus
- United Office
- BenQ
- Chief
- Hisense
Najnowsze instrukcje dla Tablica
9 Marca 2025
30 Grudnia 2025
12 Grudnia 2024
5 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024