Instrukcja obsługi Soundcore Select 3
Soundcore
Kołyska/stacja dokująca
Select 3
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Soundcore Select 3 (4 stron) w kategorii Kołyska/stacja dokująca. Ta instrukcja była pomocna dla 17 osób i została oceniona przez 9 użytkowników na średnio 4.7 gwiazdek
Strona 1/4

At a Glance
Strap BassUP Button
Power Button
BassUP LED
Power LED Volume Up Button
Bluetooth LED Play/Pause Button
Bluetooth Button USB-C Charging Port
Volume Down Button
Charging Your Speaker
• Use a certified USB-C cable and charger to prevent any damage.
Flashing Red Low Battery
Steady Red Being Charged
Steady White Fully Charged

Powering On / Off
Press or Press and Hold for 2 Seconds
Power On
Steady White
Press and Hold for 2 Seconds
Power Off
Light Off
This speaker will power off automatically after 20 minutes if no device is connected.
Using Your Speaker
Bluetooth Mode
Press the Bluetooth button to enter Bluetooth pairing mode, then select " " from the Bluetooth soundcore Select 3
list to connect.
Select 3
PAIRING
CONNECTED
Press Enter / Exit Bluetooth Pairing Mode
Flashing Blue Bluetooth Pairing
Steady Blue Bluetooth Connected
• To re-enter Bluetooth pairing mode, press the Bluetooth button once.
• This speaker can only play music on one mobile device at a time. To play from another connected device,
pause the device that's currently active first.
• Each time you power on your speaker, it will automatically connect to your last connected device if available
within the Bluetooth range. If not, press the Bluetooth button to enter Bluetooth pairing mode.

PartyCast Mode
You can wirelessly connect up to 100 soundcore speakers equipped with PartyCast function to synchronize audio
and light.
1. Connect a soundcore speaker to your phone via Bluetooth.
2. Press and hold the Bluetooth button on the speaker for 2 seconds to enter PartyCast pairing mode. The
speaker that's currently connected to your phone becomes the primary speaker.
3. Press and hold the Bluetooth button on each soundcore speaker for 2 seconds to enter PartyCast pairing
mode. They will become secondary speakers.
1
2
3
PAIRING
CONNECTED
PAIRING
CONNECTED
> >2s 2s
Press and Hold for 2 Seconds Enter / Exit PartyCast Pairing Mode
Flashing White PartyCast Pairing
Flashing White (Primary Speaker)
PartyCast Connected
Steady White (Secondary Speaker)
• Double-press the Bluetooth button on a secondary speaker to make it the primary speaker.
Button Controls
Press or Press and Hold for 2 Seconds
Power On
Press and Hold for 2 Seconds Power Off
Press Play / Pause
Press Twice Next Track
Press Three Times Previous Track
Press Answer / End a Call
Press and Hold for 2 Seconds Reject a Call
Press
Enter Bluetooth Pairing Mode
Press and Hold for 2 Seconds Enter / Exit PartyCast Pairing Mode
Press Volume Up / Down
Press
Bass On/Off
Specyfikacje produktu
Marka: | Soundcore |
Kategoria: | Kołyska/stacja dokująca |
Model: | Select 3 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Soundcore Select 3, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Kołyska/stacja dokująca Soundcore
26 Grudnia 2024
21 Sierpnia 2024
6 Sierpnia 2024
Instrukcje Kołyska/stacja dokująca
- Kołyska/stacja dokująca Panasonic
- Kołyska/stacja dokująca Tivoli Audio
- Kołyska/stacja dokująca Asus
- Kołyska/stacja dokująca Ryght
- Kołyska/stacja dokująca Salora
- Kołyska/stacja dokująca Sweex
- Kołyska/stacja dokująca Fenton
- Kołyska/stacja dokująca Sitecom
- Kołyska/stacja dokująca Axis
- Kołyska/stacja dokująca Magnat
- Kołyska/stacja dokująca Bang & Olufsen
- Kołyska/stacja dokująca HyperJuice
- Kołyska/stacja dokująca White Shark
- Kołyska/stacja dokująca KEF
- Kołyska/stacja dokująca JBL
Najnowsze instrukcje dla Kołyska/stacja dokująca
31 Marca 2025
26 Marca 2025
12 Marca 2025
12 Marca 2025
10 Marca 2025
27 Lutego 2025
27 Lutego 2025
11 Lutego 2025
7 Lutego 2025
7 Lutego 2025