Instrukcja obsługi SoundTube SB335

SoundTube odbiornik SB335

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla SoundTube SB335 (8 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 5.5 użytkowników na średnio 4.4 gwiazdek

Pobierz PDF

Strona 1/8

1.435.647.9555

800.647.TUBE

www.soundtube.com

Warning

SoundTube products must be installed by ofessional audio installer/contracto a pr r. For safety and for

optimum audio performance, installer must follow all di ections issued by Sound r Tube Entertainment .

Front Rear

Box Contents

1- Amplier

1- Bluetooth

antenna

1- IR receiver with 1m cord

1- 32 V, 3.75 A power supply

1- Six-pin Euroblock connectors

1- Three-pin Euroblock connectors

1- Mounting bracket

2- 2" Velcro strips

1- Double sided tape disk for IR receiver

The SB335 is a 2 or 3 channel amplier with Dolby Digital decoding. It is designed to be used with either an analog or digital input from a TV or other audio

source. With a digital input it automatically senses Dolby Digital and PCM and switches modes. The SB335 takes the input signal from an audio source, decodes

it and outputs either a 2 or 3 channel amplied signal to a sound bar or set of speakers. When set in the 2 channel mode it will take a stereo or multi-channel

signal and mix it down to 2 output channels (left and right). When set in the 3 channel mode it will take a stereo or multi-channel signal and mix it into 3 output

channels (left, right and center). In either mode there is a sub out option.

When used in place of internal TV speakers, change the TV’s audio setting to external speakers. Teach the SB335 the TV’s volume codes and it seamlessly

operates with no additional remotes.

Install Instructions For:

SB335