Instrukcja obsługi Stanley TLM165
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Stanley TLM165 (13 stron) w kategorii dalmierz. Ta instrukcja była pomocna dla 50 osób i została oceniona przez 25.5 użytkowników na średnio 4.6 gwiazdek
Strona 1/13

Stanley TLM165
1
EN
Table of Contents
Instrument Set-up- - - - - - - - - - - - - - - - - - - - - - - 2
Introduction- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2
Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2
Display - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -3
Insert batteries - - - - - - - - - - - - - - - - - - - - - - - - - - - -3
Operations - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -4
Switching ON/OFF - - - - - - - - - - - - - - - - - - - - - - - - -4
Clear - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -4
Message Codes - - - - - - - - - - - - - - - - - - - - - - - - - - -4
Adjusting measuring reference - - - - - - - - - - - - - - - - -4
Distance unit setting - - - - - - - - - - - - - - - - - - - - - - - - 5
Multifunctional endpiece- - - - - - - - - - - - - - - - - - - - - - 5
Measuring Functions - - - - - - - - - - - - - - - - - - -6
Measuring single distance - - - - - - - - - - - - - - - - - - - -6
Permament measuring- - - - - - - - - - - - - - - - - - - - - - - 6
Add / Subtract - - - - - - - - - - - - - - - - - - - - - - - - - - - - -6
Area- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -7
Volume- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -7
Pythagoras (2-point) - - - - - - - - - - - - - - - - - - - - - - - -8
Pythagoras (3-point) - - - - - - - - - - - - - - - - - - - - - - - -8
Memory (5 last results) - - - - - - - - - - - - - - - - - - - - - -9
Technical Data - - - - - - - - - - - - - - - - - - - - - - - - - 10
Message Codes - - - - - - - - - - - - - - - - - - - - - - - - 11
Care- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11
Warranty - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11
Safety Instructions- - - - - - - - - - - - - - - - - - - - - 11
Areas of responsibility - - - - - - - - - - - - - - - - - - - - - - 11
Permitted use - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12
Prohibited use - - - - - - - - - - - - - - - - - - - - - - - - - - - -12
Hazards in use - - - - - - - - - - - - - - - - - - - - - - - - - - -12
Limits of use - - - - - - - - - - - - - - - - - - - - - - - - - - - - -12
Disposal - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -12
Electromagnetic Compatibility (EMC)- - - - - - - - - - - -12
FCC statement (applicable in U.S.) - - - - - - - - - - - - -13
Laser classification- - - - - - - - - - - - - - - - - - - - - - - - -13
Labelling - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -13
Specyfikacje produktu
| Marka: | Stanley |
| Kategoria: | dalmierz |
| Model: | TLM165 |
| Kolor produktu: | Black, Yellow |
| Automatyczne wyłączanie zasilania: | Tak |
| Waga produktu: | 100 g |
| Technologia baterii: | Alkaliczny |
| Typ ekranu: | LCD |
| Zakres temperatur (eksploatacja): | 0 - 40 °C |
| Rodzaj baterii: | AAA |
| Liczba baterii: | 2 |
| Baterie w zestawie: | Tak |
| Stopień ochrony IP: | IP54 |
| Długość fali: | 635 nm |
| Napięcie baterii: | 1.5 V |
| Jednostka miary: | m |
| Klasa lasera: | 2 |
| Zakres pomiarowy: | 0.05 - 50 m |
| Dokładność pomiaru: | 0.001 m |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Stanley TLM165, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje dalmierz Stanley
28 Września 2024
12 Września 2024
7 Września 2024
3 Września 2024
30 Sierpnia 2024
27 Sierpnia 2024
23 Sierpnia 2024
16 Sierpnia 2024
Instrukcje dalmierz
- Testboy
- Bushnell
- Hitachi
- Callaway
- Einhell
- SereneLife
- Leupold
- DeWalt
- Vortex
- IFM
- Halo
- Kress
- Kreator
- Leica
- Toolcraft
Najnowsze instrukcje dla dalmierz
28 Stycznia 2025
28 Grudnia 2024
10 Grudnia 2024
5 Października 2024
2 Października 2024
29 Września 2024
29 Września 2024
29 Września 2024
29 Września 2024
28 Września 2024