Instrukcja obsługi StarTech.com 1P1FFC-USB-SERIAL
StarTech.com
Nie skategoryzowane
1P1FFC-USB-SERIAL
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla StarTech.com 1P1FFC-USB-SERIAL (2 stron) w kategorii Nie skategoryzowane. Ta instrukcja była pomocna dla 27 osób i została oceniona przez 14 użytkowników na średnio 4.4 gwiazdek
Strona 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: November 8, 2024
Product ID
1P1FFC-USB-SERIAL
1P3FFCB-USB-SERIAL
1P6FFC-USB-SERIAL
1P10FFC-USB-SERIAL
Component Function
1Serial Port DB9 • Connect to a Serial Peripheral Device
2DB9 Screws
• Used to secure the to the Serial DB9 Port Serial
Peripheral Device
• The included can be installed for DB9 Nuts
compatibility with or Serial Peripheral Devices Cables
• 1P1FFC-USB-SERIAL DB9 Nutscomes with the
pre-installed and the includedDB9 Screws
3LED Indicators
• Data Receive LED: Green Flashes to indicate activity
• Data Transmit LED: Yellow Flashes to indicate activity
• USB LED: BlueSolid to indicate driver has been
installed, and USB connection enumerated
4USB Type-A Port • Connect the to an available USB to Serial Adapter
USB-A Port
Package Contents
1P3FFCB-USB-SERIAL
1P6FFC-USB-SERIAL
1P10FFC-USB-SERIAL
• USB to Serial Adapter x 1
• DB9 Screws x 2
• Quick-Start Guide x 1
FTDI USB-A to RS232 DB9 Serial Adapter Cable - M/M - ESD Level 4
Requirements
• USB Type-A Enabled Computer x 1
For the latest drivers/software, product information, technical specications, and
declarations of conformance, please visit:
www.StarTech.com/1P1FFC-USB-SERIAL
www.StarTech.com/1P3FFCB-USB-SERIAL
www.StarTech.com/1P6FFC-USB-SERIAL
www.StarTech.com/1P10FFC-USB-SERIAL
Pinout Diagram
Installation
Install the Driver and Adapter
Note: Drivers should install automatically in most supported operating systems. If
they do not, please complete the following steps:
1. Navigate to:
www.StarTech.com/1P1FFC-USB-SERIAL
www.StarTech.com/1P3FFCB-USB-SERIAL
www.StarTech.com/1P6FFC-USB-SERIAL
www.StarTech.com/1P10FFC-USB-SERIAL
2. Click the tab.Drivers/Downloads
3. Under , download the appropriate for your operating Driver(s) Driver Package
system.
43
1Pin RS-232
1DCD
2RXD
3TXD
4DTR
5GND
6DSR
7RTS
8CTS
9RI
2
2
54321
9876
1P1FFC-USB-SERIAL
• USB to Serial Adapter x 1
• DB9 Screws x 2
• Quick-Start Guide x 1
Regulatory Compliance
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a dierent circuit than the receiver.
- Consult the dealer or an experienced radio/TV technician for help.
Any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority
to operate the device. If shielded interface cables are included with the product, or if additional components or accessories are
designated for use with the installation, they must be used to ensure compliance with FCC regulations.
ISED Statement / Déclaration d’ISDE
CAN ICES-003(B) / NMB-003(B)
This Class B digital apparatus complies with Canadian ICES-003.
This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1)
this device may not cause interference, and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Le présent appareil est conforme aux CNR d’ISDE Canada applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Warranty Information
This product is backed by a two-year warranty.
For further information on product warranty terms and conditions, please refer to .
www.startech.com/warranty
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss
of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the
product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the
limitations or exclusions contained in this statement may not apply to you.
FR: startech.com/fr
DE: startech.com/de
ES: startech.com/es
NL: startech.com/nl
IT: startech.com/it
JP: startech.com/jp
StarTech.com Ltd.
45 Artisans Crescent
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Road
Brackmills,
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.
StarTech.com Ltd.
Siriusdreef 17-27
2132 WT Hoofddorp
The Netherlands
Windows
1. Right-click the downloaded le and extract the contents with .Extract All
2. Browse the Windows folder and run the le.Setup
3. Follow the on-screen instructions to complete the installation.
4. Connect the to an available USB-A port.USB to Serial Adapter
macOS
1. Double-click the downloaded le.
2. Open the folder that matches your and run the le inside the macOS Version Installer
folder.
3. Follow the on-screen instructions to complete the installation.
4. Connect the to an available USB-A port.USB to Serial Adapter
Verify Driver Installation
Windows
1. Navigate to the .Device Manager
2. Under , right-click and click .Ports (COM & LPT) COM Port Properties
3. Conrm that the is installed and working as expected.Driver
macOS
1. Navigate to .System Information
2. Expand the section and click .Hardware USB
3. Conrm that appears in the list. COM Port
Specyfikacje produktu
| Marka: | StarTech.com |
| Kategoria: | Nie skategoryzowane |
| Model: | 1P1FFC-USB-SERIAL |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z StarTech.com 1P1FFC-USB-SERIAL, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Nie skategoryzowane StarTech.com
18 Marca 2025
18 Marca 2025
22 Września 2024
22 Września 2024
Instrukcje Nie skategoryzowane
- Nie skategoryzowane DB Technologies
- Nie skategoryzowane Agfa
- Nie skategoryzowane Audio-Technica
- Nie skategoryzowane GYS
- Nie skategoryzowane Festo
- Nie skategoryzowane Edimax
- Nie skategoryzowane ZZ-2
- Nie skategoryzowane Ionmax
- Nie skategoryzowane Core SWX
- Nie skategoryzowane Celly
- Nie skategoryzowane Datapath
- Nie skategoryzowane Genelec
- Nie skategoryzowane Avenview
- Nie skategoryzowane Silverline
- Nie skategoryzowane Giardino
Najnowsze instrukcje dla Nie skategoryzowane
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025