Instrukcja obsługi StarTech.com HD2A


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla StarTech.com HD2A (2 stron) w kategorii konwerter audio / video. Ta instrukcja była pomocna dla 22 osób i została oceniona przez 11.5 użytkowników na średnio 4.4 gwiazdek

Strona 1/2
USB power source
Power switch 3.5mm analog
and SPDIF
output port
HDMI output port
HDMI input port
Quick start guide
FR: Guide de l’utilisateur - fr.startech.com
DE: Bedienungsanleitung - de.startech.com
ES: Guía del usuario - es.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IT: Guida per l’uso - it.startech.com
Manual Revision: 08/10/2016
For the latest information, technical specications, and support for
this product, please visit www.startech.com/HD2A.
Packaging contents
1 x HDMI audio extractor
1 x USB power cable
1 x Toslink adapter
1x quick install guide
System requirements
HDMI source device (e.g. Blu-ray player, computer)
SPDIF or 3.5mm audio destination device, such as an audio
receiver or speakers
HDMI cabling for the source device
SPDIF or 3.5mm audio cabling for the destination device
Operating system requirements are subject to change. For the latest
requirements, please visit www.startech.com/HD2A..
HD2A
HDMI® Audio Extractor
*actual product may vary from photos
Product Overview
Front View
Left side and back view
Right side view
Operation notes
The USB power source port must be connected to a USB power
source such as a computer or a USB power adapter. This is required
in all congurations for the adapter to operate.
For SPDIF audio, connect the included Toslink adapter to the
3.5mm analog and SPDIF output port, then connect your SPDIF
cabling to the adapter.
If, once connected, the output of your destination device plays
static with no audio, it’s likely your source device is set to bit
stream audio (unprocessed). As a result it will be necessary to
adjust this setting to PCM (Pulse-code modulation) in the output
settings of your audio source device. Please consult the manual
included with your HDMI source device for instructions.
Maximum supported
resolution for video
pass-through
Up to 1920 x 1200 or 1080p
Audio specications SPDIF audio – up to 2.1 surround sound
3.5mm audio – 2-channel stereo
Specications
If an HDMI audio source that’s higher than 2.1-channel is sent
through the adapter, it will not be audible. It will be necessary to
adjust this setting in your video source to output to 2.1 channel.


Specyfikacje produktu

Marka: StarTech.com
Kategoria: konwerter audio / video
Model: HD2A
Wysokość produktu: 20 mm
Szerokość produktu: 55 mm
Głębokość produktu: 60 mm
Waga produktu: 38 g
Szerokość opakowania: 170 mm
Wysokość opakowania: 32 mm
Głębokość opakowania: 143 mm
Certyfikaty: CE, FCC
Przewody: USB
Kod zharmonizowanego systemu (HS): 85176990
Kanały wyjścia audio: 2.1 kan.
Waga wraz z opakowaniem: 135 g
HDCP: Tak
Obsługiwane tryby wideo: 480p, 720p, 1080p
Maksymalna rozdzielczość filmu: 1920 x 1080 px
Zasilane prze USB: Tak
Interfejs hosta: HDMI
Wyjście audio: 3,5 mm
Zestaw układów: Explore-EP93Z3E
Interfejs wyjściowy: HDMI
Obsługa audio: Tak

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z StarTech.com HD2A, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą