Instrukcja obsługi StarTech.com SAT2IDEADP


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla StarTech.com SAT2IDEADP (2 stron) w kategorii Kable do komputerów PC i urządzeń peryferyjnych. Ta instrukcja była pomocna dla 21 osób i została oceniona przez 11 użytkowników na średnio 4.8 gwiazdek

Strona 1/2
Manual Revision:01/10/2011
For the most up-to-date information, please visit www.startech.com
• 1 x SATA to IDE adapter
• 1 x 40-pin IDE cable
• 1 x 40-pin to 44-pin IDE cable with power
• 1 x SP4 to LP4 Power cable
• 1 x Package of mounting screws
• 1 x Installation Guide
• 2.5in 44-pin IDE hard drive or 3.5in 40-pin IDE hard
drive
1. If connecting a 3.5in (40-pin) IDE hard drive, connect
the 40-pin IDE ribbon cable to the 40-pin connector
on the inside of the SAT2IDEADP.
2. Connect the large 4-pin LP4 power cable to the small
4-pin SP4 floppy power connector on the inside of
the SAT2IDEADP.
3. Connect the ribbon cable and power cable to the
connectors on the IDE hard drive.
4. Place the IDE hard drive on the tray of the
SAT2IDEADP and line up the mounting holes on the
drive with the openings on the bottom of the tray.
5. Use the provided screws to fasten the drive to the
tray.
*actual product may vary from photos


Specyfikacje produktu

Marka: StarTech.com
Kategoria: Kable do komputerów PC i urządzeń peryferyjnych
Model: SAT2IDEADP

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z StarTech.com SAT2IDEADP, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Kable do komputerów PC i urządzeń peryferyjnych StarTech.com

Instrukcje Kable do komputerów PC i urządzeń peryferyjnych

Najnowsze instrukcje dla Kable do komputerów PC i urządzeń peryferyjnych