Instrukcja obsługi Sun Joe AJP100E
Sun Joe
Maszyna do polerowania
AJP100E
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sun Joe AJP100E (12 stron) w kategorii Maszyna do polerowania. Ta instrukcja była pomocna dla 27 osób i została oceniona przez 14 użytkowników na średnio 4.9 gwiazdek
Strona 1/12
© 2020 by Snow Joe
®, LLC
All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS
A Division of Snow Joe
®, LLC
OPERATOR’S MANUAL
Model AJP100E Form No. SJ-AJP100E-880E-M
RRANDOM ORBIT BUFFER + POLISHER
ELECTRIC | 0.7 AMP | 6" | 3800 OPM
1
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may
result in serious bodily injury or death.
General Power Tool Safety
Warnings
m WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and instructions
may result in electric shock, re and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
mDANGER! This indicates a hazardous situation, which,
if not followed, will result in serious injury or death.
mWARNING! This indicates a hazardous situation, which,
if not followed, could result in serious injury or death.
mCAUTION! This indicates a hazardous situation, which,
if not followed, could result in minor or moderate injury.
Work Area Safety
1. Keep work area clean and well lit – Cluttered or dark
areas invite accidents.
2. Do not operate power tools in explosive atmospheres,
such as in the presence of ammable liquids, gases
or dust – Power tools create sparks which may ignite the
dust or fumes.
3. Keep children and bystanders away while operating a
power tool – Distractions can cause you to lose control.
Electrical Safety
1. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodied plugs and
matching outlets will reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators – There is an increased risk of electric shock
if your body is earthed or grounded.
3. Do not expose power tools to rain or wet conditions
– Water entering a power tool will increase the risk of
electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
5. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
6. If operating a power tool in a damp location is
unavoidable, use a Ground Fault Circuit Interrupter
(GFCI) protected supply. Use of a GFCI reduces the risk
of electric shock.
Personal Safety
1. Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a
power tool while you are tired or under the inuence
of drugs, alcohol or medication – A moment of
inattention while operating power tools may result in
serious personal injury.
2. Use safety equipment. Always wear eye protection
– Safety equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
3. Prevent unintentional starting. Ensure the switch is in
the o-position before connecting to power source,
picking up or carrying the tool. – Carrying power tools
with your nger on the switch or energizing power tools
that have the switch on invites accidents.
4. Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal
injury.
5. Do not overreach. Keep proper footing and balance at
all times – This enables better control of the power tool in
unexpected situations.
6. Dress properly. Do not wear loose clothing or jewelry.
Keep your hair, clothing and gloves away from moving
parts – Loose clothes, jewelry or long hair can be caught
in moving parts.
Specyfikacje produktu
| Marka: | Sun Joe |
| Kategoria: | Maszyna do polerowania |
| Model: | AJP100E |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Sun Joe AJP100E, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Maszyna do polerowania Sun Joe
4 Września 2024
17 Sierpnia 2024
Instrukcje Maszyna do polerowania
- Royal Catering
- Zipper
- Kalorik
- Ozito
- Total
- Bosch
- Holzmann
- Vonroc
- Topcraft
- Speed & Go
- Makita
- Panduit
- HiKOKI
- GlobalTronics
- Einhell
Najnowsze instrukcje dla Maszyna do polerowania
28 Grudnia 2024
28 Grudnia 2024
26 Grudnia 2024
24 Grudnia 2024
17 Grudnia 2024
17 Grudnia 2024
8 Października 2024
5 Października 2024
3 Października 2024
2 Października 2024