Instrukcja obsługi Sun Joe SPX-PWB1-RM


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sun Joe SPX-PWB1-RM (4 stron) w kategorii Myjka wysokociśnieniowa. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 7 użytkowników na średnio 4.3 gwiazdek

Strona 1/4
© 2021 by Snow Joe
®, LLC
All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS
R
SPX-PWB1-RM ASSEMBLY QUICK GUIDE
1-866-SNOWJOE (1-866-766-9563)
If you have any questions or comments,
please call the Snow Joe® + Sun Joe® customer service department at:
R
SPX-PWB1-RM ASSEMBLY QUICK GUIDE
1-866-SNOWJOE (1-866-766-9563)
If you have any questions or comments,
please call the Snow Joe® + Sun Joe® customer service department at:
Most SPX2000 Series + SPX4003-ELT, SPX7001E
Trigger gun Scrubbing broom rst piece Locking collar
Most SPX3000 and SPX4000 Series
Trigger gun Transfer adapter Scrubbing broom rst piece Locking collar
SPX2000, SPX2500, SPX2600, SPX4003, SPX4003-ULT
Trigger gun Locking collarScrubbing broom rst piece
SPX200/1000 Series
Trigger gun Locking collarScrubbing broom rst pieceMiddle wand
1
FOR USE WITH
SPX2000, SPX2500, SPX2600, SPX4003, SPX4003-ULT:
1. If not already done, detach your spray wand from your trigger gun.
2. Take the scrubbing broom and align the two tabs with the trigger gun.
3. Once aligned, push the top piece into the trigger gun, twist counter clockwise to lock into place.
4. Use the locking collar to secure the scrubbing broom in place. Move up and twist to lock.
FOR USE WITH
MOST SPX2000 SERIES + SPX4003-ELT, SPX7001E:
1. If not already done, detach your spray wand from your trigger gun.
2. Take the scrubbing broom and align the two tabs with the trigger gun.
3. Once aligned, push the top piece into the trigger gun, twist counter clockwise to lock into place.
4. Use the locking collar to secure the scrubbing broom in place. Move up and twist to lock.
FOR USE WITH
SPX200/1000 SERIES:
1. Disconnect your spray wand assembly so that only the middle wand remains attached to your trigger gun.
2. Take the scrubbing broom and align the two tabs with the middle wand.
3. Once aligned, push the scrubbing broom into the middle wand and twist counter clockwise to lock into place.
4. Use the locking collar to secure the scrubbing broom in place. Move up and twist to lock.
2
FOR USE WITH
MOST SPX3000 AND SPX4000 SERIES:
1. If not already done, detach your spray wand from your trigger gun.
2. Attach the transfer adapter to your trigger gun.
3. Take the scrubbing broom and align the two tabs with the transfer adapter.
4. Once aligned, push the top piece into the transfer adapter, twist counter clockwise to lock into place.
5. Use the locking collar to secure the scrubbing broom in place. Move up and twist to lock.


Specyfikacje produktu

Marka: Sun Joe
Kategoria: Myjka wysokociśnieniowa
Model: SPX-PWB1-RM

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Sun Joe SPX-PWB1-RM, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Myjka wysokociśnieniowa Sun Joe

Instrukcje Myjka wysokociśnieniowa

Najnowsze instrukcje dla Myjka wysokociśnieniowa