Instrukcja obsługi Supermicro SuperServer 5019P-M

Supermicro serwer SuperServer 5019P-M

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Supermicro SuperServer 5019P-M (15 stron) w kategorii serwer. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 4.5 użytkowników na średnio 4.6 gwiazdek

Pobierz PDF

Strona 1/15

Information for Lot 9 of d )ErP (Eco esign

This addendum addresses E European Union (EU) codesign requirements for servers and storage

products addendum product. All and ratings within this data are in reference only Supermicro to the (s) in

the manual. The below information conforms ommission to requirements laid down Cin Annex II of the

R . egulation 2019/424

3(1)(a): e See Section 1.1 of th system manual for the product type.

3(1)(b): See the title page and preface of the system manual for the trademark and

manufacturer’s address.

3(1)(c): (s). See the title page of the system manual for product model number

3(1)(d): . See the serial number on the physical system to determine the year of manufacture

3(1)(e-j): PSU E actor V ) (F fficiency and Power F alue (Table rom 80 Plus report)

PSU Model #: PWS- -350

Watts: 350W

PSU E fficiency

P Fower actor

% of R Lated oad

% % % %10 20 50 100

50 %

Single -Output (AC DC)

86.10%

91.00%

92.51%

90.18%

0.99

E P System (EUT) fficiency in I Sdle tate ower (Table)

Representative

Configurations

Measured Idle State

Power (W)

Calculated Idle Power

Allowance (W)

High-End Performance

Configuration

94.5

304.57

Typical Configuration

N/A

Low-End Performance

Configuration

62.9

206.10

System E P(EUT) fficiency in A Sctive tate ower (Table)

Representative

Configurations

Active tate S

E Score fficiency

(Effserver)

Minimum A Sctive tate

Efficiency

High-End Performance

Configuration

19.4

Typical Configuration

N/A

Low-End Performance

Configuration

15.6

3(1)( is k): The operating condition class A2.

Dry

bulb °Ctemp

Humidity

range, non-condensing

Operating

condition

Allowable

range

Recom

mended

range

Allowable

range

Recommended

range

Max

dew

point (°C)

Maximum

rate

change

(°

- 32

-27

–

12 °C P Dew oint (DP) and

8 %

relative

humidity (RH) to

17 C °

and 80 % RH

–

9 °C DP to

15 °C DP

and

60 % RH

5/20

-35

-27

–

12 °C 8 % DP and RH to

21 °C

% and 80 RH

Same

as A1

5/20

-40

-27

–

12 °C 8 % DP and RH to

24 °C

% and 85 RH

Same

as A1

5/20

-45

-27

–

12 °C 8 % DP and RH to

24 °C

% and 90 RH

Same

as A1

5/20

3(1)(l): The idle state power at the higher boundary temperature of the operating conditions

class is W. 111.51

3(1)( ism): The active state efficiency and performance a minimum of 15.6.

3(1)(n): There are two methods by which a user can securely delete data from this system. The

user performing secure data deletion should be an IT professional.

The first is with a Unified Extensible Firmware Interface (UEFI) shell utility. This utility

works on X10/X11/H11/H12/M11 motherboard series with onboard SATA/NVMe devices.

Any user may access and download this utility through following link:

https://www.supermicro.com/about/policies/disclaimer.cfm?url=/wftp/utility/Lot9_Secure

_Data_Deletion_Utility/

Download the shell utility package and extract it to a USB flash drive, then plug the drive

into the server for which secure data deletion is necessary. Then turn the system on.

Navigate to the BIOS setup menu, then place the server system into the UEFI shell

environment. Follow the instructions in the README file to invoke the utility and

complete the deletion.

The second method is through the secure data deletion tool provided by the original

manufacturer of the hard drive. This should be used in a scenario where the shell utility

is not applicable. Each manufacturer should have the tool available on their website. If

needed, please look on the hard drive label for the name of the manufacturer and model

information.

3(1)( iono): List of recommended combinat s of blade servers with chassis: N/A.

3(1)(p): List of all current SKUs within this product family: N/A.

3(3)(a): There is no use of cobalt in batteries in this product.

The indicative weight range of eodymium in the HDD is if manufactured by Western n 0.0

Digital, and is 25 grams if manufactured by Seagate.between 5-

3(3)(b): Please see the disassembly instructions on the next page.

Specyfikacje produktu

Marka:	Supermicro
Kategoria:	serwer
Model:	SuperServer 5019P-M
Kolor produktu:	Czarny
Częstotliwość wejściowa AC:	50 - 60 Hz
Napięcie wejściowe AC:	100 - 240 V
Wysokość produktu:	43 mm
Szerokość produktu:	437 mm
Głębokość produktu:	503 mm
Waga produktu:	8000 g
Procesor wbudowany:	Nie
Prędkość transferu danych przez Ethernet LAN:	10,100,1000 Mbit/s
Ilość portów Ethernet LAN (RJ-45):	2
Zakres temperatur (eksploatacja):	10 - 35 °C
Zakres wilgotności względnej:	8 - 90 %
Typ procesora:	Intel® Xeon®
Kod zharmonizowanego systemu (HS):	84714100
Liczba portów USB 2.0:	2
Przewodowa sieć LAN:	Tak
Waga wraz z opakowaniem:	13800 g
Zakres temperatur (przechowywanie):	-40 - 60 °C
Dopuszczalna wilgotność względna:	5 - 95 %
Ilość obsługiwanych rozmiarów dysków pamięci:	4
Obsługiwane rozmiary dysków pamięci:	3.5 "
Ilość portów USB 3.2 Gen 1 (3.1 Gen 1) Typu-A:	4
Obudowa:	Rack (1U)
Liczba wentylatorów:	6 went.
Obsługiwane rodzaje pamięci:	DDR4-SDRAM
Maksymalna pojemność pamięci:	768 GB
Gniazdo procesora:	LGA 3647 (Socket P)
Układ płyty głównej:	Intel® C621
Poziomy raid:	0, 1,5, 10
Typ BIOS:	UEFI AMI
PCI Express x16 gniazda:	1
Zasilanie:	350 W
Wspierane interfejsy dysków twardych:	Serial ATA III
Rodzaj interfejsu sieci Ethernet:	Fast Ethernet, Gigabit Ethernet
Liczba portów VGA (D-Sub):	1
Korekcja ECC:	Tak
Technologia okablowania Copper Ethernet:	10BASE-T, 100BASE-TX, 1000BASE-T
Model karty graficznej on-board:	Aspeed AST2500
Szeregowe porty komunikacyjne:	2
Wersja gniazd typu Slot (PCI Express):	3.0
Ilość slotów DIMM:	6
Liczba obsługiwanych procesorów:	1
Prędkość zegara pamięci RDIMM:	2133,2400,2666 MHz
Przemieszczanie twardej wnęki na napęd HDD:	Tak
Średnica czaszy wentylatora:	40 mm
Maksymalna pojemność pamięci RDIMM:	192 GB
Prąd stały (+5 V):	12 A
Prąd stały (+12 V):	29 A
Port IPMI LAN (RJ-45):	Tak