Instrukcja obsługi Supermicro SuperServer 5028A-TN4
Supermicro
nieskategoryzowany
SuperServer 5028A-TN4
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Supermicro SuperServer 5028A-TN4 (118 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2.5 użytkowników na średnio 4.6 gwiazdek
Strona 1/118

USER’S MANUAL
Revision 1.0a
S SUPER ERVER®
5028A-TN4

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and
documentation, is the property of Supermicro and/or its licensors, and is supplied only under a
license. Any use or reproduction of this product is not allowed, except as expressly permitted by
the terms of said license.
IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO
USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY
HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE
COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH
HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all
claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class
A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturer’s instruction manual, may cause harmful
interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your
own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
Manual Revision 1.0a
Release Date: August 06, 2015
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2015 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America

3
Preface
Preface
About this Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SuperServer. Installation and
maintainance should be performed by experienced technicians only.
Please refer to the server specications page on our Web site for updates on
supported memory, processors and operating systems (http://www.supermicro.
com).
This manual may be periodically updated without notice. Please check the
Supermicro Web site for possible updates to the manual revision level.
Warnings
Special attention should be given to the following symbols used in this manual.
Warning! Indicates high voltage may be encountered when performing
a procedure.
Warning! Indicates important information given to prevent equipment/
property damage or personal injury.
Specyfikacje produktu
Marka: | Supermicro |
Kategoria: | nieskategoryzowany |
Model: | SuperServer 5028A-TN4 |
Kolor produktu: | Czarny |
Częstotliwość wejściowa AC: | 50 - 60 Hz |
Napięcie wejściowe AC: | 100 - 240 V |
Wysokość produktu: | 240 mm |
Szerokość produktu: | 210 mm |
Głębokość produktu: | 279 mm |
Waga produktu: | 6800 g |
Prędkość transferu danych przez Ethernet LAN: | 10,100,1000 Mbit/s |
Ilość portów Ethernet LAN (RJ-45): | 4 |
Zakres temperatur (eksploatacja): | 0 - 40 °C |
Zakres wilgotności względnej: | 10 - 85 % |
Typ procesora: | Intel |
Przewodowa sieć LAN: | Tak |
Diody LED: | Tak |
Zakres temperatur (przechowywanie): | -20 - 60 °C |
Dopuszczalna wilgotność względna: | 10 - 95 % |
Ilość obsługiwanych rozmiarów dysków pamięci: | 6 |
Obsługiwane rozmiary dysków pamięci: | 2.5, 3.5 " |
Ilość portów USB 3.2 Gen 1 (3.1 Gen 1) Typu-A: | 3 |
Obudowa: | Mini Tower |
Obsługiwane rodzaje pamięci: | DDR3-SDRAM |
Maksymalna pojemność pamięci: | 64 GB |
Gniazdo procesora: | BGA 1283 |
Procesor: | Intel Atom® |
Typ BIOS: | EEPROM |
Ilość złączy SATA III: | 2 |
Zasilanie: | 250 W |
Prąd wejściowy: | 5 A |
Wspierane interfejsy dysków twardych: | Serial ATA II, Serial ATA III |
Rodzaj interfejsu sieci Ethernet: | Fast Ethernet, Gigabit Ethernet |
Liczba portów VGA (D-Sub): | 1 |
Korekcja ECC: | Tak |
Rozmiar pamięci BIOS: | 64 Mbit |
Wersja ACPI: | 5.0 |
Technologia okablowania Copper Ethernet: | 1000BASE-T, 100BASE-T, 100BASE-TX |
Model karty graficznej on-board: | Aspeed AST2400 |
Liczba głównych źródeł zasilania: | 1 |
Wersja gniazd typu Slot (PCI Express): | 2.0 |
Rodzaj pamięci: | 204-pin SO-DIMM |
Napięcie pamięci: | 1.35, 1.5 V |
Ilość slotów DIMM: | 4 |
Liczba obsługiwanych procesorów: | 1 |
Przemieszczanie twardej wnęki na napęd HDD: | Tak |
Magistrala pamięci: | 72 bit |
Ilość złączy SATA II: | 4 |
PCI Express x8 slots: | 1 |
Port IPMI LAN (RJ-45): | Tak |
Funkcje BIOS: | Plug & Play, SMBIOS 2.3, UEFI |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Supermicro SuperServer 5028A-TN4, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje nieskategoryzowany Supermicro
21 Sierpnia 2024
30 Lipca 2024
30 Lipca 2024
30 Lipca 2024
30 Lipca 2024
30 Lipca 2024
30 Lipca 2024
30 Lipca 2024
30 Lipca 2024
30 Lipca 2024
Instrukcje nieskategoryzowany
- nieskategoryzowany Zanussi
- nieskategoryzowany Vortex
- nieskategoryzowany Crestron
- nieskategoryzowany Horizon Fitness
- nieskategoryzowany Worx
- nieskategoryzowany AEA
- nieskategoryzowany Steinel
- nieskategoryzowany Tenda
- nieskategoryzowany Ikea
- nieskategoryzowany Mackie
- nieskategoryzowany Platinum Tools
- nieskategoryzowany Conair
- nieskategoryzowany Mistral
- nieskategoryzowany Makita
- nieskategoryzowany Kicker
Najnowsze instrukcje dla nieskategoryzowany
28 Października 2024
28 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024