Instrukcja obsługi Thermionic Culture The Fat Bustard 2
Thermionic Culture
blender ręczny
The Fat Bustard 2
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Thermionic Culture The Fat Bustard 2 (15 stron) w kategorii blender ręczny. Ta instrukcja była pomocna dla 19 osób i została oceniona przez 10 użytkowników na średnio 4.8 gwiazdek
Strona 1/15
©Thermionic Culture Ltd, May 2011 1
WARNING
For your personal safety, please read this operating manual
and warning thoroughly before using the equipment.
This unit must be installed in such a manner that operator
access to the mains plug is maintained. Where the product is
to be rack mounted, this may be achieved by having access to
the disconnection device for the whole rack.
To reduce the risk of electric shock, it is essential that the unit
is disconnected from the mains supply before removing the
cover.
Please also note that the power supply capacitors within this
unit can remain charged even after the mains supply has been
disconnected. It is essential that these capacitors are
discharged after the mains supply has been disconnected and
the covers have been removed.
In the event that this unit has been dropped or has suffered an
impact, an electrical safety test must be carried out before
reconnection to the mains supply.
This equipment is not intended for use in explosion hazard
environments. It must be used and stored in studio conditions,
such that the ambient relative humidity does not exceed 80%,
nor is the temperature to be allowed to drop to a level, which
would cause dew point to be reached.
The Fat Bustard gets hot! Please ensure that adequate
ventilation is provided and that the ventilation slots are not
obstructed. When rack mounting this equipment, mount it at
the top of the rack, or if there is equipment above it, leave an
air gap of 1U ( 1.75”) for heat to escape. A fan may be
required to provide sufficient airflow. Failure to observe these
precautions may result in damage occurring to the equipment
above and/or to the Fat Bustard.
© Thermionic Culture Ltd, May 2011 2
CONTENTS
Section Page
1 Introduction 3
2 Controls 4
2.1 Attitude 4
2.2 EQ section 4
2.3 Stereo width section 5
2.4 Stereo spread 5
2.5 Bandwidth 5
2.6 Bass to centre 6
2.7 Balance 6
2.8 Output level 6
2.9 Monitor 6
3 Installation Hints 7
3.1 Installation 7
3.2 Power 7
3.3 Inputs 7
3.4 Outputs 7
3.5 Audio Connections 7
3.6 Tips 8
4 Operational Hints 9
5 Inputs and Outputs 10
6 Servicing and Maintenance 11
6.1 Valves 11
6.2 Operating voltage / Fuse 11
7 Specification 12
Specyfikacje produktu
| Marka: | Thermionic Culture |
| Kategoria: | blender ręczny |
| Model: | The Fat Bustard 2 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Thermionic Culture The Fat Bustard 2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje blender ręczny Thermionic Culture
26 Lutego 2025
Instrukcje blender ręczny
- blender ręczny Maestro
- blender ręczny Taurus
- blender ręczny Siemens
- blender ręczny Vivax
- blender ręczny Grundig
- blender ręczny Girmi
- blender ręczny ECG
- blender ręczny Concept
- blender ręczny Krups
- blender ręczny Dualit
- blender ręczny Esperanza
- blender ręczny Hamilton Beach
- blender ręczny Black Decker
- blender ręczny Smeg
- blender ręczny Swan
Najnowsze instrukcje dla blender ręczny
8 Kwietnia 2025
5 Kwietnia 2025
1 Kwietnia 2025
31 Marca 2025
24 Marca 2025
24 Marca 2025
10 Marca 2025
26 Lutego 2025
30 Stycznia 2025
30 Stycznia 2025