Instrukcja obsługi TOA ST-16A

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla TOA ST-16A (2 stron) w kategorii obsługa głośników. Ta instrukcja była pomocna dla 20 osób i została oceniona przez 6 użytkowników na średnio 4.1 gwiazdek

ST-16ASPEAKER STAND

INSTRUCTION MANUAL

1. SAFETY PRECAUTIONS

•Before installation or use, be sure to carefully read all the instructions in this section for correct and safe

operation.

• Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or

cautions regarding safety.

•After reading, keep this manual handy for future reference.

2. HOW TO USE

Step 1.Attach the bracket to the speaker as shown below.

Attach the bracket to the speaker

Indicates a potentially hazardous situation which, if mishandled, could

result in death or serious personal injury.

WARNING

•Do not mount the speaker of 7 kg or more. The stand or its internal pipe may fall down or drop, resulting in

personal injury. Even though the speaker weight is below 7 kg, do not use that speaker if the stand is made

unstable.

• Do not extend the internal pipe beyond the MAXIMUM point marked in red. Doing so may make the stand

unstable, and cause the stand or its internal pipe to fall down or drop, resulting in personal injury.

•Avoid installing the stand in the following locations. Otherwise, the mounted speaker may drop or the stand

may fall, resulting in personal injury.

·Doorway or other high traffic area where people may trip on the stand.

·Locations where the unit is exposed to a strong wind.

·Unstable locations, such as on a rickety table or a slanted surface.

Important: Even in locations other than the above, if the unit may fall down, take appropriate fall preventive

measures.

• When adjusting the stand height with the speaker mounted, hold the speaker firmly. Doing otherwise may

cause the stand to fall, resulting in personal injury and/or property damage.

•Fully expand the legs. If the legs are not fully expanded, the stand may fall down, resulting in personal injury.

Attachment to the horn speakerAttachment to the FGM speakerAttachment to the megaphone

Butterfly nut

Washer

Hexagon bolt

Insert the hexagon bolt into the hexagonal

hole located inside the bracket and tighten

the bolt to attach the bracket.

Hexagon bolt

Insert the hexagon bolt into the hexagonal hole

located inside the bracket and tighten the bolt

rotating the bracket in the direction of the arrow

to secure the bracket.

Spacer

Be sure to use the spacer.

If not used, the thread in the

megaphone may be destroyed.

Note

Do not use this spacer for the

megaphones ER-2230W and

WR-2930W.

Speaker

mounting screw

Bracket

Bracket

Bracket

Specyfikacje produktu