Instrukcja obsługi TOA ZM-9003
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla TOA ZM-9003 (2 stron) w kategorii Kontroler. Ta instrukcja była pomocna dla 18 osób i została oceniona przez 9.5 użytkowników na średnio 4.7 gwiazdek
Strona 1/2
ZONE MANAGER
OPERATING INSTRUCTIONS
ZM-9003
Thank you for purchasing TOA's Zone Manager.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
1. GENERAL DESCRIPTION
The ZM-9003 is a remote control switch panel with 4 interlocking selection switches and 2
momentary switches. Connecting it to the 9000 Series amplifier's control input terminal permits
various controls such as BGM source selection and the sound volume adjustment.
It can be mounted in an American standard 2-gang electrical box in a wall.
2. NOMENCLATURE AND FUNCTIONS
[Front] [Side] [Rear]
12
3
1. Interlocking selection switches [1 – 4]
Activate the function assigned to them when pressed.
2. Momentary switches [5, 6]
Activate the function assigned to them when pressed.
3. Control output terminal [1 – 6, E]
Connect this terminal to the 9000 Series amplifier's control input terminal.
Use a cable with 250 Ωor less line resistance (per line) for this connection.
Avoid installation of this cable and power cables in the same conduit. Separate piping.
3. CONNECTIONS
Up to 2 ZM-9003 units can be connected to the 9000 Series amplifier.
One C-001T Control I/O Expansion Module is required for connection.
Connect the ZM-9003 to each control input terminal of the C-001T and 9000 Series amplifier as
shown below.
Function assignment to the interlocking selection switches or momentary switches is performed at
the 9000 Series amplifier. For the method, refer to the instruction manual supplied with the 9000
Series amplifier.
E
E
4
4
3
3
1
2
2
1
VOL2
REMT
VOL1
REMT
OUT
IN
I/O
CTRL
E
IN
E
IN
E
E
4
4
3
3
1
2
2
1
VOL2
REMT
VOL1
REMT
OUT
IN
I/O
CTRL
E
IN
E
IN
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
E
OUT IN
1
2
3
4
5
6
7
8
E
1
2
3
4
5
6
E
9000 Series amplifier
(Control-I/O connection terminal)
(Control output terminal)
4 interlocking switches
ZM-9003
(Control output terminal)
4 interlocking switches
ZM-9003
C-001T
(Control input/output terminal)
9000 Series amplifier
OUT IN
1
2
3
4
5
6
7
8
E
C-001T
5. SPECIFICATIONS4. DIMENSIONAL DIAGRAMS
250 or less (per line)Ω
Removable terminal block (7 pins)
–10 to +40°C
Surface-treated steel plate, white, paint
120 (w) x 127 (h) x 53.3 (d) mm (4.72" x 5" x 2.1")
375 g (13.23 oz)
Line Resistance
Terminal
Operating Temperature
Finish
Dimensions
Weight
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
Machine screw (for box mounting)
No.6-32UNC x 30 .................................................................................. 4
M4 x 30 .................................................................................................. 4
Machine screw (for panel mounting) No.6-32UNC x 6 ............................... 4
Removable terminal plug (7 pins) ............................................................... 1
[Front]
[Bottom]
[Front view without panel]
[Figure when mounted]
[Side] [Rear]
120 (4.72)
53.3 (2.1)
40 (1.57)7 (0.28)
2-gang electrical box
(American type, not supplied)
88 (3.46)
46 (1.81)
66 (2.6)
99 (3.9)
79 (3.11)
66 (2.6)
97 (3.82)
127 (5)
70 (2.76)
83.5 (3.29)
66 (2.6)
97 (3.82)
104 (4.09)
133-05-426-8C
URL: http://www.toa.jp/
Unit: mm (inches)
Note
Ground the electrical box to avoid unit malfunction due
to static electricity.
Traceability Information for Europe (EMC directive 2004/108/EC)
Manufacturer:
TOA Corporation
7-2-1, Minatojima Nakamachi, Chuo-ku, Kobe, Hyogo,
Japan
Authorized representative:
TOA Electronics Europe GmbH
Suederstrasse 282, 20537 Hamburg,
Germany
Specyfikacje produktu
| Marka: | TOA |
| Kategoria: | Kontroler |
| Model: | ZM-9003 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z TOA ZM-9003, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Kontroler TOA
15 Września 2024
4 Września 2024
31 Sierpnia 2024
27 Sierpnia 2024
23 Sierpnia 2024
19 Sierpnia 2024
14 Sierpnia 2024
13 Sierpnia 2024
8 Sierpnia 2024
Instrukcje Kontroler
- Kontroler Venom
- Kontroler Honeywell
- Kontroler Hori
- Kontroler Garmin
- Kontroler Amazon
- Kontroler DataVideo
- Kontroler EXSYS
- Kontroler Belkin
- Kontroler Heath Zenith
- Kontroler Kenwood
- Kontroler SIIG
- Kontroler Intel
- Kontroler Genius
- Kontroler Media-Tech
- Kontroler Canyon
Najnowsze instrukcje dla Kontroler
2 Kwietnia 2025
30 Marca 2025
30 Marca 2025
30 Marca 2025
30 Marca 2025
30 Marca 2025
28 Marca 2025
27 Marca 2025
26 Marca 2025
2 Marca 2025