Instrukcja obsługi TP-Link Kasa KE100
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla TP-Link Kasa KE100 (3 stron) w kategorii termostat. Ta instrukcja była pomocna dla 23 osób i została oceniona przez 12 użytkowników na średnio 4.3 gwiazdek
Strona 1/3
Smart Thermostatic Radiator Valve
Quick Start Guide
Install Guide:
Scan QR code or visit
https://www.tp-link.com/support/faq/3404/
1. Set up a Kasa smart hub in the Kasa Smart app if you
haven’t already done so. You can get the app Kasa Smart
from the App Store or Google Play.
If you want to remotely control / manage the valve, you need to add a Kasa smart hub rst. You can adjust temperature manually.
After inserting the batteries, the valve is ready to use.
Rotate the valve to increase / decrease temperature.
OR
2. Use the provided cover-opener to press and hold the
SYNC/RESET button for 5 seconds to reset the valve.
3. Smart Open the Kasa Smart app, tap + and select
Thermostats. Follow the app instructions to pair the valve
and complete setup.
There are two types of valves: and .Thermostatic Manual
Kasa Smart Thermostatic Radiator Valve is only compatible with the thermostatic valve.
If your connector is , you can screw the new valve onto the radiator directly. M30 x 1.5
If not, check whether one of the provided adapters ts the connector. If your none of them t your
connector, please purchase a proper one yourself.
Thermostatic Valve Manual Valve
1. 2. Check existing valve type Check the connector type
01 / Check Compatibility
03 / Install the Valve
04 / Set Up the Valve After Install Don’t Have a Hub?
1. Install the valve rst before powering it up.
2. No need to shut o water before changing the radiator
valve. Water will not leak.
3. Avoid installing the valve in the same room where you
have installed the boiler thermostat.
4. Install the valve within range of your Kasa smart hub if you
wish to control it using the Kasa Smart app.
02 / Install Requirements
1. Unscrew the existing valve. Read the following instructions rst before installing
the new valve:
2. Screw the new valve directly (for M30 x 1.5 connector) or after installing
the proper adapter (for non-M30 x 1.5 connectors). The ▲ at the bottom
of the valve indicates the position of the display.
4. Open the battery cover and insert two AA LR6 Alkaline
batteries. Make sure the positive and negative
terminals face the correct direction.
3. Remove the cover of the valve by rotating
counterclockwise using the provided cover-opener.
*Do NOT use rechargeable batteries or 1.2V AA batteries.
M30 x 1.5
RAVL Adapter
RAV Adapter
RA Adapter
30mm
1.5mm
Vertical InstallationHorizontal Installation
SYNC/RESET
*Images may dier from your actual product.
Specyfikacje produktu
| Marka: | TP-Link |
| Kategoria: | termostat |
| Model: | Kasa KE100 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z TP-Link Kasa KE100, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje termostat TP-Link
27 Września 2024
19 Sierpnia 2024
17 Sierpnia 2024
Instrukcje termostat
- HomeMatic
- Alecto
- Baxi
- Go Green
- Magnum
- Wolf
- Drayton
- IMIT
- GE
- Oventrop
- GENERAL Life
- Easy Timer
- SPC
- Truma
- De Dietrich
Najnowsze instrukcje dla termostat
9 Kwietnia 2025
9 Kwietnia 2025
8 Kwietnia 2025
8 Kwietnia 2025
7 Kwietnia 2025
7 Kwietnia 2025
6 Kwietnia 2025
6 Kwietnia 2025
5 Kwietnia 2025
5 Kwietnia 2025