Instrukcja obsługi Tripp Lite ISOBAR12ULTRA

Tripp Lite nieskategoryzowany ISOBAR12ULTRA

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Tripp Lite ISOBAR12ULTRA (20 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 41 osób i została oceniona przez 21 użytkowników na średnio 4.8 gwiazdek

Pobierz PDF

Strona 1/20

PRODUCT

REGISTRATION

chance to win an ISOBAR® surge

protector in our monthly drawing!

Tripplite.Eaton.com/warranty

Important Safety Instructions 2

Installation 3

Features 4

Specifications 5

Warranty & Product Registration 5

Ultimate Lifetime Insurance Policy 6

Rack-mount Power Strips & Isobar®

Rack-mount Surge Protectors/

Line-Noise Filters

Español 7

Français 13

Models:

DRS-1215

IBAR12

IBAR12-20T

ISOBAR12ULTRA

ISOBAR12/20ULTRA

RS-0615-F

RS-0615-R

RS-1215

RS-1215-20

RS-1215-20T

RS1215-HG

RS-1215-RA

Designed to Occupy One Standard

(1U) 19" Rack Space

(IBAR12, ISOBAR12ULTRA, RS-1215, RS-1215-RA, RS-1215-HG, DRS-1215): DO

NOT exceed the MAXIMUM LOAD of 15 amps that can be drawn from each

AC outlet. DO NOT exceed the MAXIMUM LOAD of 15 amps that can be

drawn from all the outlets combined.

(IBAR12/20ULTRA, IBAR12-20T, RS-1215-20): DO NOT exceed the MAXIMUM

LOAD of 15 amps that can be drawn from each AC outlet located on the

front of the IBAR12/20ULTRA and IBAR12-20T. DO NOT exceed the

MAXIMUM LOAD of 20 amps that can be drawn from each AC outlet on the

RS-1215-20, or each AC outlet located on the rear of the IBAR12/20ULTRA

and IBAR12-20T. DO NOT exceed the MAXIMUM LOAD of 20 amps that can

be drawn from all the outlets combined.

Use of this equipment in life support applications where failure of this

equipment can reasonably be expected to cause the failure of the life

support equipment or to significantly affect its safety or effectiveness is

not recommended. Do not use this equipment in the presence of a

flammable anesthetic mixture with air, oxygen or nitrous oxide.

Important Safety Instructions

IMPORTANT SAFETY INSTRUCTIONS. This manual contains information concerning the proper

installation and use of Eaton Tripp Lite series Rack-Mount Power Strips and Isobar Surge

Protectors. SAVE THESE INSTRUCTIONS.

The Surge Protector features an internal protection that will disconnect the surge-

protective component at the end of its useful life but will maintain power to the

load—now unprotected.

Installation

Rackmount Installation

To Mount Unit in Rack: Put four user-

supplied rack-mount screws through the a

unit’s mounting ears and into the rack b

rails as shown. The user must determine the

ﬁtness of the rack-mount screws to hold the

unit in the rack before installation.

Wallmount/Under

Counter Installation

1 Detach Mounting Ears: Unscrew the

screws a holding the unit’s mounting

ears b to the sides of the unit.

2 Reorient Mounting Ears: Use the

screws from Step 1 to reattach the a

mounting ears to the unit as shown. b

Use only the manufacturer-supplied

screws or their equivalent (#6-32, ¼" ﬂat

head) to reattach the mounting ears. The

screws should be put through diagonally

opposite holes on the ear.

3 Mount Unit on Surface: Put four user-

supplied screws or similar mounting c

hardware through the unit’s mounting

ears b and into the mounting surface

as shown. The user must determine the

ﬁtness of the user-supplied mounting

hardware to support the unit before

mounting.

Specyfikacje produktu

Marka:	Tripp Lite
Kategoria:	nieskategoryzowany
Model:	ISOBAR12ULTRA
Kolor produktu:	Czarny
Częstotliwość wejściowa AC:	50 - 60 Hz
Wysokość produktu:	44.4 mm
Szerokość produktu:	444.5 mm
Głębokość produktu:	101.6 mm
Waga produktu:	2270 g
Długość kabla:	4.6 m
Szerokość opakowania:	66 mm
Wysokość opakowania:	236.2 mm
Głębokość opakowania:	518.2 mm
Certyfikaty:	UL1449/UL1283/cUL/IEEE 587 category A&B
Kraj pochodzenia:	Chiny
Waga wraz z opakowaniem:	2720 g
Wysokość skrzyni wzorcowej (zewnętrznej):	256.5 mm
Długość skrzyni głównej (zewnętrznej):	523.2 mm
Waga brutto obudowy głównej (zewnętrznej):	16870 g
Szerokość skrzyni zbiorczej (zewnętrznej):	358.1 mm
Diody LED:	Tak
Wymiary produktu (SxGxW):	445 x 102 x 44.5 mm
W opakowaniu zbiorczym GTIN (EAN / UPC):	10037332011036
Waga (imperialna):	4.6 funtów
Produkty w skrzyni głównej (zewnętrznej):	6 szt.
Wartość znamionowa udaru energii:	1280 J
Ilość gniazd sieciowych:	12 x gniazdo sieciowe
Wartość nominalna napięcia wejściowego:	120 V
Moc szczytowa:	1800 W
Powiązania danych wejściowych:	NEMA 5-15P
Długość:	57 mm
EMI/RFI filtry hałasu:	80 dB
Ochrona lini audio/wideo:	Tak