Instrukcja obsługi V-TAC VT-8618
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla V-TAC VT-8618 (11 stron) w kategorii Ulga. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 5.5 użytkowników na średnio 4.1 gwiazdek
Strona 1/11
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions
carefully before starting the installation and keep this manual handy for future reference. If you have any another
query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and
ready to serve you at the best. The warranty is valid for 5 years from the date of purchase. The warranty does not
apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against
damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12
Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for
manufacturing defects only.
ATTENTION!
Do not look directly at LED light beam. Product can only be supplied by rated voltage or voltage within the range
provided. It's forbidden to use the product with damaged protective cover. Product must not be used in unfavorable
conditions, e.g. dust, water, moisture, vibrations, explosive air atmosphere, fumes, or chemical fumes, etc. In the
area of strong electromagnetic interference, the functioning of the product may be disrupted.
USAGE GUIDELINES / MAINTENANCE
Any maintenance work must be performed when the power supply is cut o and the product has cooled down.
Clean only with so and dry cloths. Do not use chemical detergents. Do not cover the product. Ensure free air
access. Product may heat up to a higher temperature.
WARNING
• Please make sure to turn o the power before starting the installation.
• Installation must be performed by a certified person.
• For Indoor use only
• If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufac-
turer or his service agent or a similar qualified person in order to avoid a hazard.
Caution, risk of electric shock.
'This product contains a light source of energy eciency class <F>', where <F> shall be replaced by the
energy eciency class of the contained light source.
This marking indicates that this
product should not be disposed
of with other household wastes.
Replaceable (LED Only)light
source by a professional
INSTALLATION INSTRUCTION
• Switch O the Power Before Starting the Installation.
• Twist and remove the cover (Ref Image Part 2)
• Drill a hole in the ceiling to fix the light using screws (Ref Image Part 3)
• Connect the wires (Ref Image Part 4) before fixing the light using screws on the ceiling.
• Twist and lock the cover to the light (Ref Image Part 5)
• Switch ON the power and test the light.
MOUNTING
Read the manual before mounting. Mounting should be performed by a qualified electrician. Exercise caution. Product
has a protective contact /terminal. Failure to connect the protective lead may lead to electric shock. Mounting
diagram: see pictures. Check for proper mechanical fastening and connection to electrical power prior to first use.
INSTALLATION DIAGRAM
LED DOME LIGHT
LED LED
MODEL
SKU
WATTS
LUMENS
CRI
BEAM ANGLE
BODY TYPE
TOTAL CURRENT
INPUT VOLTAGE
LIFE SPAN
ON/OFF CYCLE
SHAPE
DIMENSION (LxWxH)
SQUARE
250x250x65mm
Ø295x60mm
295x295x65mm
Ø350x61mm 420x420x65mm
AC:220-240,50/60Hz
VT-8630
36W
3820LM
48W
5160LM
Sphere 360°
PP+PMMA
160mA
220mA
AC:220-240,50/60Hz
20,000 Hours 20,000 Hours 20,000 Hours
>15,000>15,000>15,000
VT-8624
24W
2500LM
Sphere 360°
PP+PMMA
170mA
AC:220-240,50/60Hz
VT-8618
18W
1830LM
>80
>80
>80
Sphere 360°
PP+PMMA
130mA
76151-24,76161-24,76171-24,
76241-24,76251-24,76261-24,
76331-24,76341-24,76351-24,
76421-24,76431-24,76441-24
76181-24,76191-24,76201-24,
76271-24,76281-24,76291-24,
76361-24,76371-24,76381-24,
76451-24,76461-24,76471-24
76211-24,76221-24,76231-24,
76301-24,76311-24,76321-24,
76391-24,76401-24,76411-24,
76481-24,76491-24,76501-24
Ø250x63mm
ROUNDROUND SQUARE ROUND SQUARE
INSTRUCTION MANUAL
SPHERE
STAYS BRIGHT
360°
Specyfikacje produktu
| Marka: | V-TAC |
| Kategoria: | Ulga |
| Model: | VT-8618 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z V-TAC VT-8618, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Ulga V-TAC
7 Kwietnia 2025
5 Kwietnia 2025
4 Kwietnia 2025
4 Kwietnia 2025
6 Lutego 2025
10 Stycznia 2025
8 Stycznia 2025
5 Stycznia 2025
5 Stycznia 2025
5 Stycznia 2025
Instrukcje Ulga
- LYYT
- Raytec
- Hoftronic
- Metabo
- Dometic
- Denver
- Adastra
- Normann
- Bright Spark
- Swisstone
- Mr. Beams
- LUPO
- Currey & Company
- CAT
- Corsair
Najnowsze instrukcje dla Ulga
9 Kwietnia 2025
8 Kwietnia 2025
8 Kwietnia 2025
8 Kwietnia 2025
8 Kwietnia 2025
5 Kwietnia 2025
5 Kwietnia 2025
5 Kwietnia 2025
5 Kwietnia 2025
5 Kwietnia 2025