Instrukcja obsługi Vaddio IR

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Vaddio IR (4 stron) w kategorii Zdalne sterowanie. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 3 użytkowników na średnio 4.4 gwiazdek

Document Number 411-0058-41 Rev A – August 2022

User Guidefor the

Vaddio IR Remote Controller

August 2022

998-2105-000 (Worldwide)

Installingthe Batteries

The remote uses two AAA batteries.

1.Remove the cover from the back ofthe remote. You may need to press down onthe

upper edge while sliding it off.

2.Install the batteries as shown in the diagram in the battery opening.

3.Slide and snap the cover back into place.

Tips forUsing the Remote

Presets: The remote provides accessto camera presets. Your camera’s web interface may

provide access to additional camera presets.

Camera selection: The remote has three IR channels, so it can control up to three

cameras independently.Checkyour camera’s manual for information on setting it as

camera 1, camera 2, or camera 3. By default,Vaddio cameras respond as camera 1

Troubleshooting tip: If the camera does not respond to the remote, press the Camera 1 button and try

again. If that doesn’t fix theproblem, try the other camera selection buttons.

Auto-framingcameras: Auto-framing pauses when you press any button that affects the shot (arrows,

home, zoom, presets).

Specyfikacje produktu