Instrukcja obsługi Velleman VMS4
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Velleman VMS4 (5 stron) w kategorii Dźwięk. Ta instrukcja była pomocna dla 26 osób i została oceniona przez 13.5 użytkowników na średnio 3.7 gwiazdek
Strona 1/5
VMS4 - 1 - VELLEMAN
VMS4 – AUDIO / VIDEO SWITCH BOX (4 IN, 2 OUT)
1. Introduction
Thank you for buying the VMS4! Please read the manual thoroughly before bringing this device into service.
If the device was damaged in transit, don't install or use it and contact your dealer.
2. Safety Instructions
• Protect the device against extreme temperatures (see “5. Technical Specifications”), dust and moisture.
• All user modifications are strictly forbidden and any damage caused by user modifications or by disregard of the
guidelines in this manual is not covered by the warranty. Take the VMS4 to your dealer if it needs to be repaired.
• Do not use the device immediately after it has been exposed to changes in temperature. Protect the device
against damage by leaving it switched off until it has reached room temperature.
• Keep the device away from children and unauthorised users.
• Only use the device for its intended purpose. All other uses may lead to short circuits, burns, electroshocks, crash,
etc. Using the device in an unauthorised way will void the warranty.
• Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
3. Connections
The VMS4 is equipped with 4 standard RCA audio/video inputs
and 2 RCA audio/video outputs (see connection diagram at the
right). Make sure to establish correct connections (do not
connect a video cable to an audio input and vice versa).
Standard colour codes are used to indicate the connections
(white for left audio channel, red for right audio channel, yellow
for video channel).
The VMS4 allows you to connect up to 4 audio/video
sources (hi-fi equipment, VCR, DVD player, satellite
receiver, camera etc.) and send those signals to 2
target devices at once (television set, monitor, video
recorder or DVD recorder for video and audio ; audio
equipment, e.g. an amplifier, for audio only).
4. Use
The front of the VMS4 is equipped with 4 changeover switches. Use these to select the desired audio/video source to
be sent to the target device(s).
5. Technical Specifications
Audio in/out terminals 4 input / 2 output type RCA pin jacks
Video in/out terminals 4 input / 2 output type RCA pin jacks
Temperature range -10 ~ +40°C
Dimensions (H x W x D) 50 x 210 x 150 mm
The information in this manual is subject to change without prior notice.
Specyfikacje produktu
| Marka: | Velleman |
| Kategoria: | Dźwięk |
| Model: | VMS4 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Velleman VMS4, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Dźwięk Velleman
9 Sierpnia 2024
Instrukcje Dźwięk
- Power Dynamics
- MCS
- Behringer
- Griffin
- Xqisit
- Nxzen
- Velodyne
- Phonak
- Timewave
- Inakustik
- NEC
- Envivo
- Cardo
- AKG
- Sony
Najnowsze instrukcje dla Dźwięk
14 Stycznia 2025
28 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024