Instrukcja obsługi Vitek VT-1205A-D4B

Vitek nieskategoryzowany VT-1205A-D4B

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Vitek VT-1205A-D4B (1 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 21 osób i została oceniona przez 11 użytkowników na średnio 3.7 gwiazdek

Strona 1/1
DC 12 5A 4CHV Power Supply Models - -VT 1205A D4B!
Installation instruction:
1. Install box at desired location in a cool place. The power
supply can be wall mounted. Make the hole position on the
wall using the back of the box as a template and drill four
mounting holes. Screw in the top two holes with the M4
screws and hang the power supply box - then affix the bottom
screws. Use drywall anchors if solid beams are unavailable.
2. Knock out (remove) the appropriate perforated knockouts for
running cables through.
3. When using approved optional backup battery, Connect Red
and Black wire from Battery input Terminal to battery terminal.
Red color is for Positive and Black color is for Negative.
4. Connect each camera device to one "+U” & one “-U” power
output terminal. Be careful that the “+” & “-“ match at the
camera as well.
5. 11 Plug the AC plug into local 0VAC power outlet. The green
LED light should be on showing power is being supplied to the
camera.
6. Close the cover and secure it with provided screw.
Technical Specifications
Each channel is protected with a 1.6Amp,PTC resettable fuse.
Operation the temperature: -14 to +86 degrees F
Storage temperature: -14 to +140 degrees F
Notes:
1. When used in an extreme weather climate the power panel ,
may take up 30 seconds to boot up after initial connection to
power.
2. To avoid the risk of fire use only type STP-2 wire or heavier
gauge No.18AWG copper at minimum. Use wire suitable for
at least 194 degrees F.
!
! !


Specyfikacje produktu

Marka: Vitek
Kategoria: nieskategoryzowany
Model: VT-1205A-D4B

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Vitek VT-1205A-D4B, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą