Instrukcja obsługi Vonroc CD507DC
Vonroc
Maszyna do śrub
CD507DC
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Vonroc CD507DC (52 stron) w kategorii Maszyna do śrub. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 5.5 użytkowników na średnio 4.5 gwiazdek
Strona 1/52
LI-ION SCREWDRIVER
CD507DC
EN Original Instructions 03
DE Übersetzung Der Originalbetriebsanleitung 08
NL Vertaling van de oorspronkelijke gebruiksaanwijzing 14
FR Traduction de la notice originale 19
ES Traducción del manual original 25
IT Traduzione delle istruzioni originali 31
PL Tłumaczenie instrukcji oryginalnej 36
TR
Orijinal talimatların çevirisi 42
WWW.VONROC.COM
A
B
C D
2
1
10
5
6
3
9
4
2 8
4
7
EN
3
WWW.VONROC.COM
1. SAFETY INSTRUCTIONS
Read the enclosed safety warnings, the additional
safety warnings and the instructions. Failure to
follow the safety warnings and the instructions may
result in electric shock, fi re and/or serious injury.
Save the safety warnings and the instructions for
future reference.
The following symbols are used in the user manual
or on the product:
Read the user manual.
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-obser-
vance of the instructions in this manual.
Risk of electric shock.
Variable electronic speed.
Rotation, left/right.
Do not use in rain.
Indoor use only.
Max temperature 450C.
Do not throw the battery into fi re.
Do not throw the battery into water.
Do not dispose of the product in unsuitable
containers.
Separate collection for Li-ion battery.
The product is in accordance with the
applicable safety standards in the European
directives.
GENERAL POWER TOOL SAFETY WARNINGS
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric
shock, fi re and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1) Work area safety
a) Keep the work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive atmos-
pheres, such as in the presence of fl ammable
liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c)
Keep children and bystanders away while opera-
ting a power tool. Distractions can cause you to
lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodifi ed plugs and matching outlets
will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase
the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk
of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
3) Personal safety
a)
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the infl uence of drugs, alcohol or medication.
A moment of inattention while operating power
tools may result in serious personal injury.
Specyfikacje produktu
| Marka: | Vonroc |
| Kategoria: | Maszyna do śrub |
| Model: | CD507DC |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Vonroc CD507DC, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Maszyna do śrub Vonroc
8 Października 2024
24 Września 2024
23 Września 2024
23 Września 2024
9 Września 2024
7 Września 2024
29 Sierpnia 2024
24 Sierpnia 2024
23 Sierpnia 2024
6 Lipca 2024
Instrukcje Maszyna do śrub
- Maszyna do śrub AEG
- Maszyna do śrub TAURUS Titanium
- Maszyna do śrub Yato
- Maszyna do śrub Carrera
- Maszyna do śrub RYOBI
- Maszyna do śrub Dremel
- Maszyna do śrub Senco
- Maszyna do śrub Bruder Mannesmann
- Maszyna do śrub Mafell
- Maszyna do śrub Panasonic
- Maszyna do śrub Einhell
- Maszyna do śrub Fein
- Maszyna do śrub Kawasaki
- Maszyna do śrub Hilti
- Maszyna do śrub Silverline
Najnowsze instrukcje dla Maszyna do śrub
13 Stycznia 2025
12 Stycznia 2025
11 Stycznia 2025
10 Stycznia 2025
4 Stycznia 2025
4 Stycznia 2025
3 Stycznia 2025
1 Stycznia 2025
1 Stycznia 2025
1 Stycznia 2025