Instrukcja obsługi Vupoint Solutions PDS-ST510-VP
Vupoint Solutions
skaner
PDS-ST510-VP
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Vupoint Solutions PDS-ST510-VP (2 stron) w kategorii skaner. Ta instrukcja była pomocna dla 20 osób i została oceniona przez 10.5 użytkowników na średnio 5.0 gwiazdek
Strona 1/2
PDS-ST510- Manual VP
1. Key features
600/300 dpi resolution scan selection
Direct save JPEG le to microSD/microSDHC card ly
Support microSD/micro card up to 32GB SDHC
Driver free to download for Windows ® XP, Windows® Vista™,
Windows® 7 and Mac OS® 10.4 or above
(direct plug-in, driver installation not required)
2. Functional parts
Part
Function
1
Resolution
Select High(600dpi) / Low(300dpi) resolution;
High / Low resolution mode icon will be displayed on
status LCD screen.
2
Stitch le
Create new folder for le storage.
3
Power button
Power On/ : Switch this key left or right to turn Off
scanner on or o.
4
Scan
In power on mode, press this button to start scanning,
press this button again to stop scanning
5
Scan LED indicator
Ready for scan: Green LED on
6
Error LED indicator
Over speed: Red LED on
7
LCD screen
Scanning status display
8
SF LED indicator
Stitch le: White LED on
9
Battery door
For 4.2V batteryrechargeable
10
micro SD card slot
microSD/micro card storage location. SDHC
11
USB interface
Download photo to a computer via USB cable provided.
12
Time set
Press to enter Time and Date setting mode
13
Format button
Press this button to format the microSD/SDHC card.
3. Explanation of the status icons
Item
Function
Description
1
SD card indicator
Photos will be stored in microSD card
2
Battery indicator
Battery is full Empty battery
3
Counting indicator
Show scanned les in microSD card
4
Selected resolution
High:600 dpi / Low:300 dpi
4. Using the scanner
4 Installing the battery .1
1. Open the battery door by sliding the battery compartment downwards as indicated by
the arrow in the diagram below.
2. Make sure battery is in the battery compartment. If not, insert rechargeable lithium 4.2V
polymer into compartmen battery t.
3. Turn on the scanner by switching the [POWER] button left.
4.2 Inserting a microSD memory card (not included)
To operate the scanner, you must insert a microSD Card (not supplied) to record and store your
pictures. Inserting the microSD memory card:
1. Turn OFF the scanner.
2. Insert the microSD card into the microSD card slot (with metal side facing up ). wards
Gently press in until card is latched.
Note: Do not force the card into the slot; forcing may damage scanner and the microSD memory
card. Align mic and try again. roSD card position (as marked)
4 me setting.3 Ti
1. [T S ] button to enter time setting mode by using a thin, blunt object, such Press IME ET
as a paperclip to access the button. The LCD screen will read for the year“1##” . “##” is
a set of number that would be changed to correspond to the actual time/date setting.
2. P the [STITCH FILE [DPI] buttons to select the current Year. ress ] or
3. [ ] button to conrm setting Press SCAN . The LCD screen will now read “2##.”
4. epeat steps 2 and 3 to select the Month, Date, Hour, and Minute. R
Indicator
Setting
1##
Year
2##
Month
3##
Date
4##
Hour
5##
Minute
5 setting the ess the [ button again to complete the Time After Minute, “5##”, pr TIME SET]
and Date setting.
4.4 Formatting the microSD memory card
Note: ed but not necessary. All contents on the microSD Formatting the microSD is recommend
card will be erased during formatting.
1. Insert a micro with metal side facing up . Then power on SD card into the scanner wards
the scanner.
2. Press the [FORMAT] button with a thin, blunt object, such as the end of a paperclip to
access the button. An “F” shows on the LCD screen.
3. Press the button once to begin formatting microSD card. [SCAN]
4. The micro the formatting process is complete. SD card indicator will blink until
4.5 Calibrating your scanner
Note: Perform calibration only when white balance needs adjustment.
1. Turn on the scanner by sliding the [POWER] button to ON. Then place the scanner on
the provided “White Balance Calibration” paper.
2. Click and hold onto the [STITCH FILE] button. While holding onto the [STITCH FILE]
button, press the [SCAN] button once and then release both bottons. SD symbol will
as h and “GREEN” and “RED” LED light will turn on.
3. Do not move the scanner. Wait until the “RED” LED light turns off. “GREEN” LED light
will stay on.
4. With only the “GREEN” LED light on, start scanning the white paper by sliding the
scanner across the paper until the “GREEN” LED light turns off. (Slide the scanner
backwards if necessary).
5. Slide the [POWER] button to OFF to turn o the scanner. Calibration is complete.
4.6 Setting the resolution
1. choose between high By pressing the [DPI] resolution button on the scanner, you may
resolution (600 dpi) and low resolution (300 dpi).
2. The high or low resolution mode will be displayed on the LCD screen to reect your
choice.
4.7 Stitch le
To group scanned les into a new folder within the microSD card use the Stitch le function.
1. a Press the [STITCH FILE] button to create new folder within the microSD card for les
storage. SF white LED light will turn on.
2. Then scan your documents. Your les will be saved into the new folder.
3. cans in another folder, press the [STITCH FILE] button To save another new set of s
again to generate a new folder.
For free optional stitching software e program , please download th from the following link:
http://research.microsoft.com/en-us/um/redmond/groups/ivm/ice/
4.8 How to scan
Note: To scan, make sure your scanner is not connected to the computer.
1. Turn on the scanner by sliding the [POWER] button to ON.
2. Place the document on a at surface and hold down the document with one hand.
3. Place the scanner on the edge of the paper approximately 5/8 to 3/4 of an inch onto the
paper to ensure the most of the document can be scanned. Make sure to keep the
scanning area in between the scanning width indicator marked on the side of the
scanner.
4. Hold the scanner at against the material and then press the [SCAN] button once.
5. Slide the scanner slowly, keeping you hand stable to get the best quality picture.
6. Press the [SCAN] button again to stop scanning.
5. LED light indications
“GREEN” SCAN LED ON Scan in progress.
“GREEN” SCAN LED OFF Standby / Scan is complete.
----------------------------------------------------------------------------------------------------
“RED” ERROR LED ON Scanning too fast.
May cause scanning error.
Restart and scan again.
“RED” ERROR LED OFF No error in scanning speed.
Continue scanning process.
---------------------------------------------------------------------------------------------------------------------
“WHITE” SF LED ON/OFF A new folder created.
﹡Scan will START when button is pressed
﹡To END scan, press button again
Specyfikacje produktu
| Marka: | Vupoint Solutions |
| Kategoria: | skaner |
| Model: | PDS-ST510-VP |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Vupoint Solutions PDS-ST510-VP, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje skaner Vupoint Solutions
Vupoint Solutions Magic InstaScan Pro PDSWF-ST48-VP Instrukcja
21 Września 2024
21 Września 2024
13 Września 2024
12 Września 2024
11 Września 2024
11 Września 2024
10 Września 2024
Instrukcje skaner
- GlobalTronics
- Tevion
- Dyka
- Minolta
- Elmo
- Newland
- Martin
- Avision
- Genius
- Zebra
- Jobo
- Rollei
- Lenco
- Rittz
- Zolid
Najnowsze instrukcje dla skaner
29 Marca 2025
22 Lutego 2025
19 Lutego 2025
28 Stycznia 2025
16 Stycznia 2025
12 Stycznia 2025
11 Stycznia 2025
11 Stycznia 2025
29 Grudnia 2024
22 Grudnia 2024