Instrukcja obsΕugi WAC Lighting Axel WS-W44014-BK
WAC Lighting
Ulga
Axel WS-W44014-BK
Przeczytaj poniΕΌej π instrukcjΔ obsΕugi w jΔzyku polskim dla WAC Lighting Axel WS-W44014-BK (2 stron) w kategorii Ulga. Ta instrukcja byΕa pomocna dla 6 osΓ³b i zostaΕa oceniona przez 3.5 uΕΌytkownikΓ³w na Εrednio 4.5 gwiazdek
Strona 1/2

ξ ξ ξ ξξ ξξ ξ ξ ξξ ξ ξξ ξ ξξ ξξ ξ ξξ ξ ξ ξξ ξξ ξ ξ ξξξ ξξ ξ ξ ξξ ξ ξξ ξ ξ ξξ ξ ξ ξξ ξ ξξ ξξξ ξ ξξξ ξξ ξ ξ ξ ξ ξ ξξ ξ ξξ ξ ξ ξξ ξξ ξ ξξ ξ ξξ ξ ξ ξ ξξ ξ ξξξ ξ ξξ ξ ξ ξ ξ ξ ξ ξξ ξξ ξ ξ ξ ξξ ξ ξ ξ ξ ξξξ ξ ξ ξ ξ ξ ξ ξ ξξ ξξ ξ ξ ξ ξ ξξξξξ ξ ξ ξξ
ξ ξ ξξ ξ
dweLED.com
Phone (800) 526.2588
Fax (800) 526.2585
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Avenue
Ontario, CA 91760
1
INSTALLATION INSTRUCTION
ξ ξ ξ ξξξ ξ ξ ξξ ξ ξ ξ ξ ξ ξ ξξ ξ ξξξξ ξ ξ ξ ξ ξ ξ
WS-W44011/WS-W44014
ξ ξ ξ ξ ξ ξ ξ ξ
ξξξ ξξ ξ ξ ξ ξ ξ ξ ξξ ξξ ξ ξ ξ ξ ξ ξ ξξξ ξΏ ξ ξ ξ ξξξ ξ ξ ξ ξ ξ ξξ ξξ ξ ξ ξ ξξ ξξ ξ ξξΏ ξ ξ ξξ ξ ξ ξ ξξ ξ ξ ξ ξ ξ ξξ ξ ξξ ξ ξξ ξΏ ξ ξξ ξξ ξ ξ ξ ξ ξξ ξ ξ ξ ξ ξ ξ ξξ ξ ξ ξ ξ ξ ξξ ξ ξ ξ ξ ξ ξξ ξ ξξ
β’ Read all instructions before installing.
β’ System is intended for installation by a licensed electrician in accordance with the National Electrical Code (NEC) and local regulations.
β’ When handling the ξxture, do not apply pressure to the LEDs. Hold the ξxture by the base only.
β’ Retain installation instructions for future maintenance reference.
ξ ξ ξ ξ ξ ξ ξ ξ
ξAll parts must be used as indicated in these instructions. This product is designed for use only with the supplied parts and/or
accessories designated for use by dweLED. Substitution of parts or accessories not designated for use with this product by dweLED could
result in personal injury or property damage, and will void the warranty. Contact an authorized dealer or the manufacturer if any parts are
damaged or missing.
ξ ξ ξ ξ ξ ξ ξ ξ ξ ξ ξ ξξ ξ ξ ξ ξ
ξCoastal conditions may cause mineral and residue build-up on the ξxture. We recommend that customers in coastal
areas clean all external surfaces of the ξxture once every two weeks with a wet cloth.
ξ ξ ξ ξ ξξ ξ ξξ ξ ξ ξ ξ ξ
ξξ
ξ ξ ξ ξξ ξ ξξξ ξ ξξ ξ ξ ξ ξξ ξΏ ξ ξ ξξ ξξ ξ ξ ξ ξ ξ ξ ξ ξξξ ξ ξ ξ ξ ξ ξ ξξ ξ ξ ξ ξξ ξ ξ ξξ ξ ξξ ξ ξ ξ ξ ξ ξ ξ ξ ξ ξ ξξ ξ ξ ξ ξξ ξ ξ ξξΏ ξ ξ ξ ξξ ξ ξ ξ ξ ξ ξ ξξ ξ ξ ξ ξ ξξ ξ ξξ ξ ξ ξ ξ ξ ξ ξ ξξξ
β’ Lisez toutes les instructions avant lβinstallation.
β’ Le systΓ¨me doit Γͺtre installΓ© par un Γ©lectricien licensiΓ© conformΓ©ment au code national de lβΓ©lectricitΓ© (NEC), et Γ©galement aux
règlements locaux.
β’ Lors de la manipulation du luminaire, nβappuyez pas sur les LED. Tenez-le uniquement par la base.
ξ ξ ξ ξ ξ ξ ξ ξ ξ ξ
ξToutes les piΓ¨ces doivent Γͺtre utilisΓ©es comme indiquΓ© dans ces instructions. Ce produit est conΓ§u pour Γͺtre utilisΓ© seulement
avec les piΓ¨ces et/ou accessoires fournis pour Γͺtre utilisΓ©s avec les produits dweLED. Remplacer des piΓ¨ces ou accessoires non conΓ§us pour ce
produit dweLED pourrait causer des dommages corporels ou matΓ©riels et pourrait Γ©galement causer lβannulation de la garantie. Veuillez
contacter un revendeur autorisé ou le fabricant si des pièces manquent ou sont endommagées.
ξ ξ ξ ξ ξξ ξξ ξ ξ ξ ξ ξ ξξ ξ ξ
ξLes conditions cΓ΄tiΓ¨res peut causer une accumulation de minΓ©raux et de rΓ©sidue sur le luminaire. Nous recommendons
aux clients qui resident dans les zones côtières de nettoyer toutes les surfaces externes du luminaire une fois toutes les deux semaines avec
un chiξon humide.
ξ ξ ξ ξ ξ ξ ξ ξ ξ
ξξ ξ ξ ξξ ξ ξ ξ ξξ ξ
Plastic Anchor
Qty: 2pcs+1 Extra
Wood Screw
Qty: 2pcs+1 Extra
D
C
Wire Connector
Qty: 3pcs+1 Extra
Mounting Screw
Qty: 1 Extra
AB

ξ ξ ξ ξξ ξξ ξ ξ ξξ ξ ξξξ ξ ξ ξξ ξ ξξ ξ ξ ξξξξ ξ ξ ξξξ ξξ ξ ξ ξξ ξ ξξ ξ ξ ξξ ξ ξ ξ ξ ξ ξξ ξξξ ξ ξ ξξ ξ ξ ξ ξ ξ ξ ξ ξξ ξ ξξ ξ ξ ξξξξ ξ ξξ ξ ξξ ξ ξξξξ ξξξ ξ ξ ξξ ξ ξ ξ ξ ξ ξ ξξ ξξ ξ ξ ξξξ ξ ξ ξ ξ ξξ ξ ξ ξ ξ ξ ξ ξ ξ ξ ξ ξξ ξ ξ ξ ξ ξ ξ ξξξξξ ξ ξ ξξ
ξ ξ ξ
dweLED.com
Phone (800) 526.2588
Fax (800) 526.2585
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Avenue
Ontario, CA 91760
2
INSTALLATION INSTRUCTION
ξ ξ ξ ξξξ ξ ξ ξξ ξ ξ ξ ξ ξ ξ ξξ ξ ξ ξξξ ξ ξ ξ ξ ξ
WS-W44011/WS-W44014
Fixture Wires
Black or
Smooth
Fixture Wires
White or
Ribbed
Fixture Wires
Bare wire
(Ground)
House Wires
Black
(Hot)
House Wires
White
(Neutral)
House Wires
Green or Bare Copper
(Ground)
ξ ξξ ξξ ξξ ξξ ξξ ξ
ξ ξξ ξξ
ξ
ξ ξ ξ
ξ ξ ξ ξ ξξ ξ
1. Shut oξ the power at the circuit breaker and remove existing ξxture, including the crossbar.
2. Carefully unpack your new ξxture and lay out all the parts on a clear area. Be careful not to lose any small parts necessary for installation.
ξ ξ ξ ξ ξ ξ ξ ξ ξξ ξ ξ ξξ ξ ξ ξ ξ ξ ξ ξξξ ξξ ξξξ ξ
3. Remove the mounting screw (B) from the ξxture.
4. Drill holes in the wall aligned with the key holes located on the mounting back plate. Insert the plastic anchor (D).
5. Secure the mounting back plate to the junction box using standard junction box screws that comes with the junction box.
Fasten the mounting back plate to the wall with the plastic anchors using the wood screws (C) provided.
(i)using any other non-original-manufacturer provided junction box screw may result in safty issue.ξ ξ ξ ξ ξ
(ii) The side of the mounting plate marked βGNDβ must face out.
ξ ξ ξ ξ ξ ξ ξ ξ ξ ξ ξξ ξ ξ ξξ ξ ξ ξ ξ ξξξ ξξ ξξξ ξ
6. Connect the ξxtureβs input wires to junction box wires as shown (Fig. 2). Make sure that all wire connectors (A) are secure. If your outlet
box has a green or bare copper ground wire, connect the driverβs ground wire to it. Otherwise, connect the ξxtureβs ground wire directly
to the back plate using the green screw provided. After wires are connected, tuck them carefully inside the junction box.
ξ ξ ξ ξ
ξ ξ ξ ξ ξ ξ ξξ ξ ξ ξξ ξ ξ ξξ ξ ξ ξ ξ ξ ξ ξ ξ
7. Secure the ξxture to the mounting back plate using the mounting screw (B).
8. To prevent moisture from entering the outlet box and causing a short, use clear caulking (i.e. indoor/outdoor silicone sealant) to
outline the outside of ξxture back plate (Fig.3)
ξ ξξ ξξ
WS-W44011: 10 3/4"
WS-W44014: 14"
1 3/4"
1 3/8"
WS-W44011: 7 7/8"
WS-W44014: 11"
ξ ξ ξ ξ ξ ξ ξ ξ ξξ ξ ξ ξ ξξ
ξξ ξ ξ ξξ ξ ξ ξ ξ ξ ξξ ξ ξ
Junction Box
Caulking
(Wall Sconce)
Mounting Screw
B
Mounting back plate
Junction Box
Wire Connector
Glass
(RPL-GLA-44011)
(RPL-GLA-44014) Junction box Screw
Fixture
A
PlasticξAnchor
WoodξScrew
D
C
Specyfikacje produktu
Marka: | WAC Lighting |
Kategoria: | Ulga |
Model: | Axel WS-W44014-BK |
Potrzebujesz pomocy?
JeΕli potrzebujesz pomocy z WAC Lighting Axel WS-W44014-BK, zadaj pytanie poniΕΌej, a inni uΕΌytkownicy Ci odpowiedzΔ
Instrukcje Ulga WAC Lighting
5 Kwietnia 2025
5 Kwietnia 2025
5 Kwietnia 2025
5 Kwietnia 2025
5 Kwietnia 2025
5 Kwietnia 2025
5 Kwietnia 2025
4 Kwietnia 2025
4 Kwietnia 2025
4 Kwietnia 2025
Instrukcje Ulga
- Ulga Tesy
- Ulga Rayzr 7
- Ulga Tellur
- Ulga Weeylite
- Ulga IDance
- Ulga Wireless Solution
- Ulga Lideka
- Ulga Yamazen
- Ulga Claypaky
- Ulga Fluval
- Ulga Pauleen
- Ulga DeSisti
- Ulga AFX
- Ulga Dracast
- Ulga Normann
Najnowsze instrukcje dla Ulga
9 Kwietnia 2025
8 Kwietnia 2025
8 Kwietnia 2025
8 Kwietnia 2025
8 Kwietnia 2025
7 Kwietnia 2025
5 Kwietnia 2025
5 Kwietnia 2025
5 Kwietnia 2025
5 Kwietnia 2025