Instrukcja obsługi Williams Sound CHG 520


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Williams Sound CHG 520 (2 stron) w kategorii Nie skategoryzowane. Ta instrukcja była pomocna dla 16 osób i została oceniona przez 8.5 użytkowników na średnio 4.9 gwiazdek

Strona 1/2
CHG 520
5-Unit Drop-In Battery Charger
USER MANUAL
CHG 520 Front and Rear View
Setup Instructions
1. Plug the DC power connector into the rear of the CHG 520.
2. Plug the power supply into an AC wall outlet.
3. Insert the Receiver into the charging slot. The receivers must be facing forward to make contact
with the charging contacts. The LED indicator on top of the IR RX20 receiver will illuminate red
4. It is safe to leave the receivers in the charger even after the batteries are fully charged. However,
we do not recommend leaving receivers in the charger for a prolonged period of time.
5. A piggy-back cable is available, which can be used to connect up to three CHG 520 chargers to
one power supply.
If No LED’s Light Up:
1. Verify that the power supply is plugged into a wall outlet.
2. Verify the wall outlet has power (no tripped circuit breaker, etc).
3. Verify the receiver is turned off.
4. Verify that all receivers are facing front in the charger. If charging, the indicator LED will illuminate
red. If fully charged, it should illuminate green.
Recycling Instructions
Help Williams AV protect the environment! Please take the time to dispose of your equipment
properly.
Please Recycle
Please do NOT dispose of your equipment in the household trash. Please take the equipment to
a electronics recycling center for proper disposal.
1


Specyfikacje produktu

Marka: Williams Sound
Kategoria: Nie skategoryzowane
Model: CHG 520

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Williams Sound CHG 520, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Nie skategoryzowane Williams Sound

Instrukcje Nie skategoryzowane

Najnowsze instrukcje dla Nie skategoryzowane