Instrukcja obs艂ugi Wyse - Dell VX0
Wyse - Dell
monitor
VX0
Przeczytaj poni偶ej 馃摉 instrukcj臋 obs艂ugi w j臋zyku polskim dla Wyse - Dell VX0 (3 stron) w kategorii monitor. Ta instrukcja by艂a pomocna dla 4 os贸b i zosta艂a oceniona przez 2.5 u偶ytkownik贸w na 艣rednio 5.0 gwiazdek
Strona 1/3
Model VX0 Mounting Bracket
Installation Instructions
The mounting bracket can be mounted vertically on a wall or horizontally under most
desks. The bracket can be mounted with the power supply holder either in the up or down
position when vertical or on the left or right when horizontal, for a total of four available
mounting positions. The thin client can be inserted with either the power button positioned
towards the top or to the right. Cables can be attached at any convenient time, as long as
the power is disconnected. The mounting bracket must be mounted vertically or
horizontally using four (4) user-provided #10 screws into a sturdy support such as a wall
brace or solid desk.
Note
If installing on a hollow wall, any standard anchoring method may be used,
such as screws, butterfly anchors, or expansion bolts.
Use the following instructions to mount the thin client.
1. Remove thumb screw from the vertical foot base, slide foot toward the back panel and
remove the foot.
2. Use the mounting bracket as a template to mark the positions of the mounting holes.
Notes
When determining location, take into account the cable lengths of the
monitor, keyboard, mouse, power supply, and peripherals.
For thin client cooling requirements, position the thin client so that the power
button to the thin client is on the top when installing in the vertical position
and to the right facing you when installing in the horizontal position under a
desk.
Mount the thin client only as indicated; improper orientation (where the back
panel or front panel is facing down) could inhibit the dissipation of heat from
the device and damage it.
Leave at least 12.5 mm between the ventilation holes of the thin client and
any solid surface. An enclosed area must have a minimum of 150 square cm
of venting or other open area to maintain proper ventilation of the thin client.
.
Specyfikacje produktu
| Marka: | Wyse - Dell |
| Kategoria: | monitor |
| Model: | VX0 |
Potrzebujesz pomocy?
Je艣li potrzebujesz pomocy z Wyse - Dell VX0, zadaj pytanie poni偶ej, a inni u偶ytkownicy Ci odpowiedz膮
Instrukcje monitor Wyse - Dell
26 Wrze艣nia 2024
26 Wrze艣nia 2024
26 Wrze艣nia 2024
Instrukcje monitor
- Zalman
- Akuvox
- Danfoss
- Jay-Tech
- BOOX
- Deltaco
- Daewoo
- IHealth
- Olympus
- Vivitek
- SMART Technologies
- Thermaltake
- Xoro
- Bearware
- IOIO
Najnowsze instrukcje dla monitor
8 Kwietnia 2025
8 Kwietnia 2025
8 Kwietnia 2025
7 Kwietnia 2025
5 Kwietnia 2025
4 Kwietnia 2025
4 Kwietnia 2025
3 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025